The Spec Of Hydraulic Valves : 5/2 way mini mechanical valves: aluminum body provides high quality and durability. Various operating methods are suitable for different working environments. 1. Model: MSV30132-01, MSV40152-01. 2. Body material: aluminum alloy. 3. Port size: 1/8" PS or NPT. 4. Panel bore size: 12mm. 5. Fluid: compressed air (....
The Spec Of Hydraulic Valves : 1. Reduced port.
2. Investment casting.
3. Blowout proof stem.
4. Available material: ASTM A351 CF8M/CF8/ASTM A216 WCB. 1. Working pressure: 1000 psi / pn 63.2. Working temperature: -20°F~ 400°F ( -29°c~ 200°c). 3. End connection: threaded ends. 4. Available size: 1/4”~ 2” (dn8~ dn50)....
The Spec Of Hydraulic Valves : 1. Pressure stable and low noise.
2. Ideal for traditional and micro- computer type electric control to achieve best result.
3. Easy micro-adjusted. 1. Valve size: 03, 06, 10.2. Maxi. operating pressure (kg/cm²): 210.3. Maxi. flow (1/min): 125, 250, 500.4. Pressure adjusting range (kg/cm²): C:8-140, H:1....
The Spec Of Hydraulic Valves : 1. Eletro-hydraulic controls.
2. EBG valve pressure is steady with low noise.
3. Good for general traditional and micro-computer control to reach the best function of unifying hydraulic electronic.
4. Hi-precision easy micro-adjusting small pressure shift monmentry exciting pressure.
The Spec Of Hydraulic Valves : 1. The valve is used in wet pipe sprinkler which is made in accordance with UL260.
2. Dry pipe and deluge valve for fire-protection service. 1. AVD 501C 2 flanged horizontal pattern.2. AVD 5001D2 thread horizontal pattern.3. Material cast iron ASTM A48 class NO35.4. Rated pressure 175psi test pressure 350psi.5. ....
The Spec Of Hydraulic Valves : * Two piece design facilitates inspection and repair
* Blow-out proof stem
* Anti-Static design is standard
* Temperature range:-60 to 450oF
* Face to face: JIB B 2212
* Flange dimensions: JIB B 2212
* Pressure rating: JIS 10K Size:1/2"-6" (DN15-DN150)Port: Full PortRating: JIS 10 KBody: CF8M/WCB&nb....
The Spec Of Hydraulic Valves : Jayson Hydraulics Modular Valves are stack type valves, and require no piping. They not only rationalise system build, but they also meet the technical requirements for a variety of hydraulic systems. Stacking systems is a new era in hydraulics. The valves have standardized mounting surface conforming to ISO 4401 and o....
The Spec Of Hydraulic Valves : 1. Unlimited prolongation of component's life.
2. Active circuit conversion for multi-functional combination.
3. Low internal leakage for massive circuit efficiency upgrade. 1. Easily gets over the impact of mass flow and pressure.2. Fast reaction increases mechanical accuracy. ....
The Spec Of Hydraulic Valves : Oversized gate valve is made of finest ductile cast iron or cast steel with high strength, light weight and precise dimensions. The disc is replaceable. And the valve is gear operated and easily open or close the valve by one man, at the same time it can be with opening indicator according to the client's requireme....
The Spec Of Hydraulic Valves : Aluminum body provides high quality and durability. Various operating methods are suitable for different working environments. 1. Model: MSV8632-01. 2. Body material: aluminum alloy. 3. Bore size: 30mm (optional: 25mm). 4. Port size: 1/8” PS or NPT. 5. Fluid: compressed air (filtered through 40µm filter....
The Spec Of Hydraulic Valves : Solenoid valve (PS520 series): aluminum alloy body. Connection between base and body is identical to ISO 1 & ISO 2. 1. Model: PS520F-02-S, PS520F-02-D, PS520F-03(4)-S, PS520F-03(4)-D. 2. Port size: 1/4", 3/8" (1/2"). 3. Fluid: compressed air (filtered through 40µ filter elements). 4. Sectio....
The Spec Of Hydraulic Valves : 2/2 way brass direct acting solenoid valves: ow starting pressure 0.5kgf/c㎡. Suitable for large flow rate and higher pressure. Stainless steel armature provides exceptional durability. Flange and ex-proof coil T4 are optional. Please install horizontally 1. Model: PU225A-03, PU225A-04, PU225A-06, PU225A-08, PU225....
The Spec Of Hydraulic Valves : 3/2 way direct solenoid valve: PU320 solenoid valves is available as single station units, or assembled as a stack. To stack this valve, tie-rod mounting kit including tie-rod nuts & o-rings & a plug are required. 1. Model: PU320-01-S, PU320N-01-S, PU320-02-S, PU320N-02-S.2. Port size: 1/8", 1/8",....
The Spec Of Hydraulic Valves : 5/2 way pilot solenoid valve: PU520 solenoid valve is a most popular product that has been used widely by customers since the 80s. It is durable and easy to use, there are various port sizes for selection to meet different customer’s need. 1. Model: PU520-02-S, PU520-02-D, PU530-02-D, PU520-03-S, PU520-03-D, PU53....
The Spec Of Hydraulic Valves : 5/2 way pneumatic valve (SK520 series): aluminum body provides high quality and durability. Different port sizes from 1/8" ~1/2" for option. 1. Model: SK520-01S, SK520-01D, SK530-01D, SK520-02S, SK520-02D, SK530-02D, SK520-03S, SK520-03D, SK530-03D, SK520-04S, SK520-04D, SK530-04D. 2. Port size: 1/8"....
The Spec Of Hydraulic Valves : Effectively stabilize the rising of input pressure. Air source input rising stably increase to ensure safety of equipments. Operation secure and safe. High quality control. 1. Model: SLV-02, SLV-03, SLV-04. 2. Port size: 1/4", 3/8", 1/2". 3. Fluid: compressed air. 4. Body material: aluminum die-cast.....
The Spec Of Hydraulic Valves : Simply operating. Large flow rate. High safety. Light weight. There are 4 ways for installation. Special cock design for more safety. 1. Model: TSV30043 (2)-02, TSV30043 (2)-03, TSV30043(2)-04. 2. Body material: aluminum alloy. 3. Port size: 1/4", 3/8", 1/2". 4. Orifice: 18mm². 5. Panel bore siz....
The Spec Of Hydraulic Valves : Providing finest speed control for cylinder piston. Non-return mechanism which allows full flow in one direction. Panel mounting is available for the valve in 1/8"~1/2" port. 1. Model: SV-01, SV-02, S-01, S-02, S-03, S-04, S-06, S-08. 2. Port size: 1/8", 1/4", 1/8", 1/4", 3/8", 1/....
The Spec Of Hydraulic Valves : 1. Compact size 18mm width.
2. Aluminum alloy body.
3. NBR seal for low friction.
4. Offering manifold for stack. 1. Model: AM520-01-S, AM520-01-D, AM530-01-D. 2. Port size: 1/8"PS or NPT. 3. Fluid: compressed air(filtered through 40μ elements). 4. Sectional area: 11m㎡. 5. Operating: inner pilot. 6. Pr....
The Spec Of Hydraulic Valves : 1. Terminals type coil.
2. Extra compact 10mm size with excellent flow.
3. Aluminum alloy body provides a long durability.
4. Fast response, low start pressure. 1. Model: PM521-M3-S, PM521-M3-D. 2. Port size: M3. 3. Fluid: compressed air. 4. Sectional area: 1.0m㎡. 5. Operating: air pilot. 6. Pressure range: 0.....
The Spec Of Hydraulic Valves : 1. Flying lead and Din connection are available.
2. Extra compact 15mm width with excellent flow(0.25Cv).
3. Aluminum alloy body with anodizing for durability.
4. One-touch override for non-locking action.
5. Provide single sub-base in M5.
6. Provide manifold for stack, maximum 16 stations. 1. Model: PU521A-M5....
The Spec Of Hydraulic Valves : 1. SUS316 stainless steel body and spool for duribility and long life.
2. Suitable for harsh working enviroments like outdoor and chemical facility.
3. 5/2 & 5/3 way as well as different ports size for selection. 1. Model: SPU520-02, 03, 04S/D. 2. Port size: 1/4", 3/8", 1/2". 3. Sectional area:....
The Spec Of Hydraulic Valves : 1. 2/2 WAY SOLENOID VALVE Brass series, Direct acting
2. Port size:PS3/8, PS1/2, PS3/4, PS1
3. Quick response
4. Stainless steel stem provides exceptional durability
5. Flange type is available for JIS 10K, ANSI 150LB and PN16.
6. Ex-proof coil T4 as optional accessory
7. Timer for setting on/off time as optional....
The Spec Of Hydraulic Valves : 1. Product: TWO Piece Flange Ball Valves ANSI:150LB-FULL PORT
2. Two piece design facilitates inspection and repair
3. Blow-out proof stem
4. Anti-Static design is standard
5. Temperature Range: -60o to 450oF
6. Face to face: ANSI B16.5
7. Flange dimensions:ANSI B16.5
8. Pressure rating: ANSI 150# Size:1/2&q....
The Spec Of Hydraulic Valves : PROPISTON (TACHENG) Hydraulics Co., Ltd since its inception in 1979, it experiences decades of hard working and long-term commitment to R & D capabilities to enhance its advantage. Commitment to product development and improvement, TACHENG mainly manufactures piston pump, various hydraulic valves , and hydraulic par....
The Spec Of Hydraulic Valves : PROPISTON (TACHENG) Hydraulics Co., Ltd since its inception in 1979, it experiences decades of hard working and long-term commitment to R & D capabilities to enhance its advantage. Commitment to product development and improvement, TACHENG mainly manufactures piston pump, various hydraulic valves , and hydraulic par....
The Spec Of Hydraulic Valves : 1. 3-pc stainless steel ball valve.
2. Full port.
3. Investment casting.
4. Blowout proof stem.
5. Available material: astm a351 cf8m. 1. Working pressure: 1000 psi / pn 63. 2. Working temperature: -20°F~ 400°F (-29°c~ 200°c). 3. End connection: threaded ends / socket weld / butt weld. 4. Availa....
The Spec Of Hydraulic Valves : 1. 2-pc stainless steel ball valve.
2. Full port.
3. Investment casting.
4. Long neck iso 5211 direct mounting pad.
5. Blowout proof stem.
6. Available material: astm a351 cf8m. 1. Working pressure: 1000 psi / pn 63. 2. Working temperature: -20°F~ 400°F ( -29°c~ 200°c). 3. End connection: threa....
The Spec Of Hydraulic Valves : 1. 3-pc stainless steel ball valve.
2. Full port.
3. Investment casting.
4. Long neck iso 5211 direct mounting pad.
5. Blowout proof stem.
6. Available material: astm a351 cf8m. 1. Working pressure: 1000 psi / pn 63. 2. Working temperature: -20°F~ 400°F ( -29°c~ 200°c). 3. End connection: threa....
The Spec Of Hydraulic Valves : 1. 2-pc flanged ball valve.
2. Full port.
3. Investment casting.
4. Blowout proof stem.
5. Anti-static design.
6. Available material: SCS 14A/ 13A. 1. Flange dimension: JIS B2212. 2. Face to face: JIS B2212. 3. Working pressure: 10k. 4. Working temperature: -29°c~ 200°c. 5. Available size: 1/2”~ ....
