The Spec Of Industrial Blower : 1. TAI-YIH SUN 3-rotor roots blowers are new series roots type blowers. We made precise 3-rotors roots blower by advanced technology center machining machine using 4-spindle simultaneously be finished. It can reduce the tolerance of multiple-operation machining, and promote the precision of machining, also it will get ....
The Spec Of Industrial Blower : 1. Manufacturing specially those products such as axial fans, centrifugal fans, tangential fans, external rotor fans and motors that are widely used in ventilation, heating and air condition.
2. Providing fractional horsepower motors including single-phase asynchronous motors, synchronous motors, DC brush motors, DC ....
The Spec Of Industrial Blower : 1. Air flow: 154 ~ 164 CFM.
2. Impeller: die-cast aluminum housing galvanised sheet-
steel impeller.
3. Motor: capacitor-run induction and external rotor motor.
4. Rotor: black paint.
5. Bearing: dual ball bearing, permanently lubricated. 1. Operating voltage range:
(1) 85V AC to 125V AC for 115V type.
(2) ....
The Spec Of Industrial Blower : 1. Product name: SHB-530 hand blower.
2. Instruments. 1. Volts 230V. amps 2.3A.2. Output 530W, fill-load.3. Speed 14,500rpm.4. Wind pressure 2.7m3/ min.5. Wind velocity 560 mmAg. ....
The Spec Of Industrial Blower : Product Name: BENZ TRUCK BLOWER 360Rotate.More information, please contact us now. ....
The Spec Of Industrial Blower : Functions :
Ventilation in air-conditioned environment to control temperature, tunnel ventilation of dry furnaces and ceramic kilns.
* APPLICATIONS: For air ventilation in mining field, and tunnel. For smoke exhaust in textile factory.
* PROCESSING CAPACITY: Q:80CMM~100CMM, SP:60~150mmAq, M:5HP~500HP
The Spec Of Industrial Blower : 1. Motor: the ring blowers are driven by 2-pole TEFC motors with (IP54) protection and insulation class F for 2 Horse power and below, and insulation class F for 3 Horse power and above.
2. Shaft seal: maintenance-free shaft seal separated the motor from the impeller.
3. Casing: the casing for the impeller and the m....
The Spec Of Industrial Blower : Specification:
1. Frame: steel with black plastic-coated or silver electroplate.
2. Impeller: plastic or aluminum.
3. Bearing system: ball bearing.
4. Motor: capacitor induction.
5. Dielectric withstand voltage: AC1500V (50/60Hz) one minute.
6. Operating temperature: -20°C - 60°C.
7. Life: 30000 hours(at ....
The Spec Of Industrial Blower : Air Blower 編號 噴嘴長度 接頭尺寸 最大使用壓力 Model Series Nozzle Lenth(cm) Port Size (Rc) Max. Working Pressur(Kgf/cm2) B-12 12 1/4" 10 B-30 30 1/4" 10 ....
The Spec Of Industrial Blower : 1. Low start-up voltage, low power consumption.
2. Current automatically shutdown protection and restart function.
3. Special function output available, like PWM design control circuit.
4. Patent back-incline blades design for high airflow efficiency. Ranging from 50 x 50 x 9 to 120 x 120 x 32mm, with 5 to 48v, ....
The Spec Of Industrial Blower : Product improved by raising the intensity in order to prevent cent rotor and axis deviation from external influences. 1. Applications of the pressure conveyance. 2. Pressures applied: 0 ~ 0.6 kgf/cm² 1 ~ 200HP. 3. Special order with specific designs. ....
The Spec Of Industrial Blower : 1. Die cast impeller.
2. Dynamically balanced impeller.
3. Double shielded shaft bearing.
4. Can be operating under suction inlet closed.
5. Motor shaft-mounted impeller.
6. Improved cooling fan design. RoHS & CE qualified. ....
The Spec Of Industrial Blower : 1. Motor: capacitor motor ,thermal protection.
2. Housing/frame: aluminum die cast.
3. Impeller: thermoplastic PBT impeller, rated UL94V-0.
4. Safety approval: UL, CUL, CE, RoHS. 1. 183 x 190 x 70mm. 2. Voltage: 115V, 230V, 380V, 440V. 3. Airflow: 100 ~ 45CFM. 4. Net weight: 1650g (3.6 Lbs). ....
The Spec Of Industrial Blower : 1. Housing: aluminum painted.
2. Blade: plastic UL 94V-0 P.B.T.
3. Insulation resistance: 10MΩ, 500VDC/ min between bare wire and frame. 1. Dielectric strength: 500VAC for one minutue. 2. Operation temp: -20 ℃ ~ 70 ℃ ( humidity 15% - 90% RH). 3. Storage temp: -40 ℃ ~ 85 ℃ ( humidity 15% - 90% RH). 4. Lea....
The Spec Of Industrial Blower : Dust/mist blower for backpack type with 23 litre chemical tank. And use 53.8cc two-stroke engine. 1. Diemensions (L x W x H): 425 x 457 x 750 mm.
2. Dry weight: 13 kg.
3. Tank capacity: 23 Lit.
4. Engine type: Japan 2 stroke.
5. Displacement: 53.2 cc.
6. Fuel tank capacity: 1.20 Lit.
7. Ignition system: capac....
The Spec Of Industrial Blower : 1. Frame and impeller material: plastic (UL 94V-O).
2. Bearing system:
(1) Ball bearing (B).
(2) Sleeve bearing (S).
3. Lead wires: UL 1007 AWG 28 or equivalent.
4. Red: +, black: -. 1. Model No:
(1) X0752512Y.
(2) X=Bearing system, can be S or B type.
(3) Y=Fan speed, can be L, M, H or HH.
2. Net weigh....
The Spec Of Industrial Blower : * APPLICATIONS: For drying applocations of wood and plywood. For dust collection of wood and chemical industy.
* PROCESSING CAPACITY: Q:30CMM~2200CMM, SP:100~600mmAq, M:3HP~500HP
* FEATURES: Optimum static pressure range 100~400mmAq
The Spec Of Industrial Blower : * APPLICATIONS: For air ventilation and smoke removal in building, basement, kitchen, textile drying, paper making and brick factory.
* PROCESSING CAPACITY: Q:10CMM~300CMM, SP:5~75mmAq, M:1/2HP~125HP
* FEATURES: Low horsepower conumption, high air flow capacity, low noise level.
The Spec Of Industrial Blower : * APPLICATIONS: For drying, refrigeration, kiln, chemical indutry, tunnel, paper making industry.
* PROCESSING CAPACITY: Q:30CMM~5000CMM, SP:125~15000mmAq, M:5HP~7500HP
* FEATURES: Optimum static pressure range 165~550mmAq
The Spec Of Industrial Blower : Using vertical motor install on the blower. Discharge and suction silencer install both sides of the blower. 1. Applications of the pressure conveyance.2. Pressures applied: 0 ~ 0.6 kgf/cm² 2 ~ 30HP.3. Special order with specific designs. ....
The Spec Of Industrial Blower : For traditional water-cooling blowers, the cog wheels can only be partly cooled, which can cause an ovenheat and break down the machine. And our new design THW type blower has the special feature that the main air room can be completely covered by the cooling water, this way the machine can stand higher heat, so more s....
The Spec Of Industrial Blower : 1. Frame: steel with black plastic-coated or silver electroplate.
2. Impeller: plastic or aluminum.
3. Bearing system: ball bearing.
4. Motor: capacitor induction.
5. Dielectric withstand voltage: AC1500V (50/60Hz) one minute.
6. Operating temperature: -20°C - 60°C.
7. Life: 30000 hours(at 40℃). 1. M....
The Spec Of Industrial Blower : 1. Frame: steel with black plastic-coated or silver electroplate.
2. Impeller: plastic or aluminum.
3. Bearing system: ball bearing.
4. Motor: capacitor induction.
5. Dielectric withstand voltage: AC1500V (50/60Hz) one minute.
6. Operating temperature: -20°C - 60°C.
7. Life:30000 hours(at 40℃). 1. Fa....
The Spec Of Industrial Blower : 1. Voltage: 380VAC.
2. Frequency: 50Hz.
3. Speed level: 1.
4. Speed(RPM): 1350.
5. Power(W): 280.
6. Airflow(m³/min): 18.
7. Noise(dB): 65.
8. Factory location: China.
9. Sample request: Yes.
10. Target markets: worldwide. 1. Impeller: metal..2. Frame: steel with plastic-coated or electroplate.3. Bearing ....
The Spec Of Industrial Blower : 1. Voltage: 380VAC.
2. Frequency: 50Hz.
3. Speed level: 1.
4. Speed(RPM): 1350.
5. Power(W): 280.
6. Airflow(m³/min): 18.
7. Noise(dB): 65.
8. Factory location: China.
9. Sample request: Yes.
10. Target markets: worldwide. 1. Impeller: metal.2. Frame: steel with plastic-coated or electroplate.3. Bearing s....
The Spec Of Industrial Blower : 1. Die cast impeller.
2. Dynamically balanced impeller.
3. Double shielded shaft bearing.
4. Dust proof shaft seal.
5. Motor shaft-mounted impeller.
6. Improved cooling fan design. Compact design. ....
The Spec Of Industrial Blower : Key features:
1. Die cast impeller.
2. Dynamically balanced impeller.
3. Double shielded shaft bearing.
4. Dust proof shaft seal.
5. Motor shaft-mounted impeller.
6. Improved cooling fan design.
7. Compact design. 1. Approval/certification: CE, ISO 9001, ISO 14000.2. Main export market(s): MID-EAST, EUROPE,....
The Spec Of Industrial Blower : Key features:
1. Die cast impeller.
2. Dynamically balanced impeller.
3. Double shielded shaft bearing.
4. Dust proof shaft seal.
5. Motor shaft-mounted impeller.
6. Improved cooling fan design.
7. Compact design. 1. Approval/certification: CE, ISO 9001, ISO 14000.2. Main export market(s): AUSTRAL, AFRICA, ....
The Spec Of Industrial Blower : 1. When leaf wheel operate, it will create some air flow, which will be enforced by the surrounding air, and eventually the total air body will be pressured and moved to the air outlet and then goes out.
2. Easy installation: the well-equipped blower can be easily installed at any place, any time, for air compressing ....
