The Spec Of Industrial Controllers : Gearless Permanent Magnet Synchronous Motor Traction Machine
The PMSM Gearless traction machine is assembled by permanent-magnet synchronous motor, traction wheel and brake system through the encoder to achieve closed-loop control and frequency control operation.
Compared with the traditional products, the traction....
The Spec Of Industrial Controllers : High accuracy of pressure control. Can be installed in any position. Easy installation for panel mounting or in line supported plumbing. It provides consistent air pressure in wide range. Easy adjustment of air pressure. 1. Model: R200-02. 2. Port size: 1/4". 3. Fluid: compressed air. 4. Construction: piston t....
The Spec Of Industrial Controllers : Product: Ball Screw Linear Actuator For relevant specifications, please refer to our website. ....
The Spec Of Industrial Controllers : ●Place of Origin:Taiwan
●Model Number:GM6K
●Function:home and commercial appliance Temperature range:-4℉~158℉Place of Origin:TaiwanModel Number:GM6KFunction:home and commercial applianceBody Material:PlasticAppliance:Fireplace ....
The Spec Of Industrial Controllers : Product Description:
*PP-6750V is an intelligent time recording terminals designed to meet variant applications in time attendance and access control, lift control & ARM/DISARM security requirements. Each terminal can be operated independent simply or through PC/Internet adapter PC-T100 to fulfill the multiple d....
The Spec Of Industrial Controllers : 1. Automatic / manual operation.
2. PC communication and software available.
3. Programmable margin of target PF.
4. With pf abnormal alarm indicator and contact.
5. Over-compensation protected.
6. Free ck ratio setting.
7. Circular or weight sequence controls.
8. Switch in and out time programmable.
The Spec Of Industrial Controllers : WDF GAS SPRINGS are freely used for chair designs to reach the varieties of requirements, like STANDARD, AUTO RETURN, AUTO HIGH, AUTO RETURN & HIGH and FIEXED ones for the chairs in offices, casinos, schools, theaters and so on. Function as regular chairs with free adjustments, but keep at the very high positio....
The Spec Of Industrial Controllers : Material: Housing is made from aluminum alloy and S41C. Internal gears are made from SMF5030.
The Spec Of Industrial Controllers : 50A Intelligent Solar Charge Controller
Model:
SC-15A
SC-20A
SC-30A
SC-40A
SC-50A FEATURES:Microcontroller Integrated12V/24V & Battery Type Selectable by DIP SwitchLoad On at Night Mode by DIP SwitchLED Indicators for Controller StatesLED Indicators for Battery StatesAluminum HousingMultiple Safet....
The Spec Of Industrial Controllers : 1. Low pressure flow exact regulator is the regulator of controlling the volume of fluid and can be precisely controlled.
2. Standard bore(mm): 3 mm.
The Spec Of Industrial Controllers : 1. DNS controller is a single axis NC controller.
2. Easy programming from front board.
3. Available M code connection with machine for automatic start.
4. Available handle wheel adapted bu optional accessories.
The Spec Of Industrial Controllers : *Optimal Wind Maximum Power Point Tracking
*Wind & Solar Charge Controller
*Can be paralleled (Max. 16 sets) at will; according to your demand.
*Battery charge management; state of charge infromation.
*Built-in Battery Energy Monitor tracks Power production and consumption to calculate the energy remaining in b....
The Spec Of Industrial Controllers : This analog temperature controller is used for simple applications with on/off or P control, without deviation indication.
The Spec Of Industrial Controllers : 1. Multi-function spot welder controller_standard control box.
2. Multi function spot welder controller constant current and 9 conditions control boxes.
3. Multi function spot welder controller constant current and 15 conditions control boxes.
4. Multi function spot welder controller constant current and 30 conditio....
The Spec Of Industrial Controllers : * OVER VOLTAGE; OVER CURRENT& WRONG POLARITY PROTECTION
* HOT LINE FUSE (15AMP) PROTECTION INPUT : DC18-35VOUTPUT :DC13.8V NO LOAD.DC 12V; 17AMP CONST./25AMP MAX.DIMENSIONS : 190(W) x 66(H) x 230(D) mm ....
The Spec Of Industrial Controllers : APPLICATIONS: Transformer dyeing, drier, food processing, boiler, air conditioning equipment, and other industrial machines.
The Spec Of Industrial Controllers : RE-M series linear actuator is designed for use in the furniture, rehabilitation and hospital bed industry. This actuator is also used in agricultural machinery and for a wide range of industrial. Input: 12V/24V/36V/48VDC Load Capacity: 2000N, 4000N, 6000N, 7000N, 8000N Speed: 4-36mm/s, 4-100mm/s, 18-36mm/s, 11-36m....
The Spec Of Industrial Controllers : The standard Gas Spring is the most commonly applied Linear Actuator. The cost is of course much lower than Spring Stopper Adjuster (Mechlok) and Gas Spring Stopper.
The Spec Of Industrial Controllers : 1. Wide input voltage windows (+/-25%).
2. Excellent voltage regulation : +/-1% output.
3. Compatible with linear and non-linear load.
4. Overload, high voltage & low voltage protection.
5. Compact size, light weight & low noise.
6. Linear voltage regulator provides higher reliability.
7. Over 95% high efficiency....
The Spec Of Industrial Controllers : Function: automatic level control. 61F-G1 floatless level switch: 1. Voltage: 110V/220V. 2. With the power supply voltage 100V(110, 120V), the wiring is made between SO-S1 and with 200V (220, 240V) SO-S2. ....
The Spec Of Industrial Controllers : This is an RF remote control subsystem with 2-button transmitters and a receiver with 4 relays. 1. Power requirements: (1) CS-04R4-DC: using 12V DC. (2) CS-04R4-AC: using 24V AC. 2. Each model can be independently programmed to set the relay output mode as follows: (1) Pulse mode: The activated relay will be closed....
The Spec Of Industrial Controllers : 1. Power plant.
2. Water treatment.
3. Damper control equipment.
4. Refrigerating, air- conditioning system.
5. Air transfer equipment.
6. Food industry.
7. Petro-chemical industry. 1. Standard: (1) Watertight IP 65. (2) Torque switch can activate torque: switches to provide overload protection. (3) Mechanica....
The Spec Of Industrial Controllers : Application scope:
1. For the crack, flexing crack, construction crack, and instruction crack of building and concrete project.
2. Leak stopping for the breast wall of artesian well in geologic drilling project.
3. Grouting of reservoir and dam for the water conservancy project, leak stopping of the water transporti....
The Spec Of Industrial Controllers : In nowadays, the gas spring has become the basic component of products in the relevant field. Through appropriate design, the gas spring has been widely used in automobile, transportation, furniture, and architectural hardware industries as well as steamship, aerospace, medical facilities, machinery plants and office f....
The Spec Of Industrial Controllers : 1. Various agricultural machinery.
2. Various equipment that need to lift up a load: such as medical instruments and vehicular installations. 1. Various constructions used for hanging a load: such as lightweight hoisting machines. 2. To be used under undesirable weather conditions: waterproof, dustproof. 3. Please....
The Spec Of Industrial Controllers : 1. Failsafe Backup Battery installed on UM1-UM4 Series.
2. UM/R series is low power consumption, High torque electric actuator.
3. With seamless shell and IP67 rated waterproof enclosure, able to install on every outdoors environment.
4. Smooth Opening speed, effectively to avoid water hammer and increase pipeline l....
The Spec Of Industrial Controllers : 1. Radio remote control (Group Control) for tubular motor and other type roller door motors.
2. There are two wallmunt transmitters in this package.
3. Leading technology design with anti-code function. 1. 288RS group radio remote control with two wallmunt transmitters and it can control up to 4 motors.....
The Spec Of Industrial Controllers : 1. Transmitter has a protecting sliding lid, to avoid unnecessary contact.
2. Sliding lid design of battery, easy to change battery.
3. Receiving High Frequency, uses SMD Component design.
4. Double-looping Protecting Design.
5. Automatic Applying Voltage Switching Design.
6. Glow-in-the-dark switching buttons.
7....
The Spec Of Industrial Controllers : The SCR unit attached with high speed fuse in order to prevent the damage of SCR due to the shortage current (di/dt). The unit is packaged instruction with less dimension, easy for installation and wiring. The causes of malfunction can be indicated by individual LED lamp, easy for trouble shooting. Less non-linearity o....
The Spec Of Industrial Controllers : SPEED CONTROLLER 12 or 24V. Please refer to the attached file for the specification details. ....
