The Spec Of Motor Parts : 1. Material: SKH51, M2, high speed steel.
2. Hardness: HRC 60°~65°.
3. Precision: 0.003~0.005mm or custom-made is acceptable. 1. Thickness: 4.23, 8.175, 9.64. 2. Width: 22.925, 28.51, 38.04. 3. Length: 53.079, 63.497, 77.77/2/B. 4. Radius: 2-E0.67, 2-R2.3, 2+R40.2. 5. Precision: 5μ. ....
The Spec Of Motor Parts : 1. Travel: 60mm.
2. Motor faders.
3. If you are interested in our products, please do not hesitate to contact us, we will provide you with more information. 1. Total resistance & tolerance: 10KΩ ±20%.2. Output law audio taper or linear taper.3. Voltage rating: not to exceed 20V DC. ....
The Spec Of Motor Parts : 1. 2-phase step motor driver.
2. All of our stepping motors product are a complete design of top quality, high reliability, innovation, advanced technology and featuring low noise, low vibration, proper torque, and smooth run.
The Spec Of Motor Parts : Precision machined metal parts for various kind of vehicles. Application: car, motorcycle, automobile, electrical bicycle, miscellaneous. ....
The Spec Of Motor Parts : We accepted any kinds of ODM & OEM job. 1. Length: 37.0mm.2. Square size: 20.0mm. ....
The Spec Of Motor Parts : Steel materials selection and professional cooling design would be crucial for productivity improvement, which plays a vital role to cost evaluation. 1. Cavity: 1 + 1 + 1 + 1.
2. Part resin: PP + 40% Talc.
3. Core steel: 1.2311 (28 ~ 32HRC).
4. Cavity steel: 1.2311 (28 ~ 32HRC).
5. Lifter: 718H (32 ~ 40HRC).
6....
The Spec Of Motor Parts : 1.Executive design for high efficiency.
2.Easy to install any kind of rear wheel of motorcycle. 1.High efficiency- it reaches up to 88%.2. Long lifecycle- could be used for 6 years even more. ....
The Spec Of Motor Parts : Right angle planetary gearhead is suitable for limited space. Single & double stage. Ratio:from 3 to 100. ....
The Spec Of Motor Parts : 1. Bracket set was accessory designed for side motor.
2. It was a necessary accessory for side motor operation.
3. Bracket set consists of gear chain, dummy ends, bearing and shaft.
4. Bracket set was usually used for the weight of door under 500kg. Operator specification:1. Gear: #530 × 50T2. Chain: #530 ....
The Spec Of Motor Parts : 1. Gear type transmission.
2. Bracket specification:
(1) T x W x L: 4.0 x 330 mm x 515 mm.
(2) T x W x L: 4.0 x 360 mm x 530 mm.
(3) T x W x L: 4.0 x 400 mm x 550 mm.
(4) T x W x L: 4.5 x 425 mm x 565 mm.
(5) T x W x L: 4.5 x 460 mm x 580 mm.
(6) T x W x L: 4.5 x 500 mm x 700 mm. 1. Shutter: TC-201. 2. Heigh....
The Spec Of Motor Parts : 1. Motor cabinet (housing): production line uses auto transfer die for power window, rod antenna of automotive components and washing machine, refrigerator used motor cabinet.
2. Automotive production, low cost of processing, stable quality, competitive price. 1. Material thickness: 3mm maximum.
2. Component heig....
The Spec Of Motor Parts : 1. Two channel quadrature output with index pulse.
2. No signal adjustment required.
3. Optical encoder module for motor. 1. Resolution: 96, 100, 192, 200, 256, 360, 400, 500, 512 P/R.
2. Absolute maximum ratings:
(1) Operating/storage temp: -10℃~+85℃.
(2) Supply voltage: -0.5~7V.
(3) Output voltage: -0.....
The Spec Of Motor Parts : Many products as follows:
Remote- control model parts / parts of cars, motorcycles / any kinds of metal parts production / electrical parts production process( material- stainless / metal / aluminum, and so on ). Controlling mold parts / cars, motorcycle parts. Many kinds of metal parts making, etc. ....
The Spec Of Motor Parts : 1. RDR 501 caliper assy.
2. Material: zinc.
3. Apply to motorcycle brake.
4. New products and made with high quality. 1. 501-L/501-R.
2. There is right and left side, common use. ....
The Spec Of Motor Parts : 1. Plastice bearing was applied for end of tubular motor and it was usually screwed on the wall bracket.
2. Plastic have to operate with end cap and they are usually applied on shutter operator system.
3. Light shutter was suitable for plastic bearing. Specification of plastic bearing:1. Dimension of hole....
The Spec Of Motor Parts : 1. Material: SKH51, M2, high speed steel.
2. Hardness: HRC 60°~65°.
3. Precision: 0.003~0.005mm or custom-made is acceptable.
The Spec Of Motor Parts : 1. 2-phase step motor driver.
2. All of our stepping motors product are a complete design of top quality, high reliability, innovation, advanced technology and featuring low noise, low vibration, proper torque, and smooth run. Specification2 - Phase Step Motor DriverMODEL DPYHHAB2400000000POWER Single -....
The Spec Of Motor Parts : 1. 2-phase step motor driver.
2. All of our stepping motors product are a complete design of top quality, high reliability, innovation, advanced technology and featuring low noise, low vibration, proper torque, and smooth run. SPECIFICATION2 - Phase Step Motor DriverMODEL DPYHHAB2600000000POWER Single-....
The Spec Of Motor Parts : 1. 2-phase step motor driver.
2. All of our stepping motors product are a complete design of top quality, high reliability, innovation, advanced technology and featuring low noise, low vibration, proper torque, and smooth run. Specification2 - Phase Step Motor Driver MODEL DPYHHAU1200000000 POWER Singl....
The Spec Of Motor Parts : 1. 2-phase step motor driver.
2. All of our stepping motors product are a complete design of top quality, high reliability, innovation, advanced technology and featuring low noise, low vibration, proper torque, and smooth run. Specification2 - Phase Step Motor Driver MODEL DPYHHDB1200000000 POWER DC24V....
The Spec Of Motor Parts : 1. 2-phase step motor driver.
2. All of our stepping motors product are a complete design of top quality, high reliability, innovation, advanced technology and featuring low noise, low vibration, proper torque, and smooth run. Specification2 - Phase Micro-Step Motor Driver MODEL DPYHHDU2220000000 POWER ....
The Spec Of Motor Parts : 1. 2-phase step motor driver.
2. All of our stepping motors product are a complete design of top quality, high reliability, innovation, advanced technology and featuring low noise, low vibration, proper torque, and smooth run. Specification2-Phase Micro-Step Motor Driver MODEL DPYHHDU2420000000POWER DC18....
The Spec Of Motor Parts : 1. Chain type transmission.
2. Bracket specification:
(1) T x W x L: 4.0 x 330 mm x 515 mm.
(2) T x W x L: 4.0 x 360 mm x 530 mm.
(3) T x W x L: 4.0 x 400 mm x 550 mm.
(4) T x W x L: 4.5 x 425 mm x 565 mm.
(5) T x W x L: 4.5 x 460 mm x 580 mm.
(6) T x W x L: 4.5 x 500 mm x 700 mm. 1. Shutter: TC-401. 2. Heig....
The Spec Of Motor Parts : 1. Hall effect sensor.
2. Speed position detection.
3. Low cost. 1. Resolution: 4, 10, 12, 20 P/R.
2. Electrical specifications:
(1) Power source: 4.5 ~ 24 VDC.
(2) Current consumption: 30 mA or below.
(3) Response frequency: 20 KHz.
(4) Output mode: with pull up resistor.
(5) Output signal: A, A&B.
3.Envi....
The Spec Of Motor Parts : Precision machined metal parts for various kind of vehicles. Application: car, motorcycle, automobile, electrical bicycle, miscellaneous. ....
The Spec Of Motor Parts : Precision machined metal parts for various kind of vehicles. Application: car, motorcycle, automobile, electrical bicycle, miscellaneous. ....
The Spec Of Motor Parts : Description:
Production line uses auto transfer die for power window/rod antenna of automotive components and washing machine, refrigerator used motor cabinet. 1. Materials: According to customer's materials
2. Specifications: According to customer's specifications.
3. Feature: Automotive production, low cost of....
