The Spec Of RF Remote Control : ●Certification:FCC / IC Power:DC AAA 1.5V battery *3pcsRF Module:315MHzRF Range:Radius of 2.7mCertification:FCC / IC ....
The Spec Of RF Remote Control : This is an RF remote control subsystem with 2-button transmitters and a receiver with 4 relays. 1. Power requirements: (1) CS-04R4-DC: using 12V DC. (2) CS-04R4-AC: using 24V AC. 2. Each model can be independently programmed to set the relay output mode as follows: (1) Pulse mode: The activated relay will be closed....
The Spec Of RF Remote Control : 1. Radio remote control (Group Control) for tubular motor and other type roller door motors.
2. There are two wallmunt transmitters in this package.
3. Leading technology design with anti-code function. 1. 288RS group radio remote control with two wallmunt transmitters and it can control up to 4 motors.....
The Spec Of RF Remote Control : 1. Transmitter has a protecting sliding lid, to avoid unnecessary contact.
2. Sliding lid design of battery, easy to change battery.
3. Receiving High Frequency, uses SMD Component design.
4. Double-looping Protecting Design.
5. Automatic Applying Voltage Switching Design.
6. Glow-in-the-dark switching buttons.
7....
The Spec Of RF Remote Control : 1. Automatic outage function (push the last settlement time and cut out automatically).
2. Roll in the horse type dyke and copy the remote controller.
3. Waterproof function of the remote control utensil and slipping to cover preventing touching by mistake.
4. Extremely good, will not crash to ultra far, steady d....
The Spec Of RF Remote Control : ●ON/OFF
●Childproof
●Flame height Adjustment
●Standing pilot ON/OFFChildproofFlame height AdjustmentStanding pilotLCDLow Battery IndicatorSecond BurnerThermostatTimerProgram Thermostat ....
The Spec Of RF Remote Control : ●ON/OFF
●Childproof
●Flame height Adjustment
●Standing pilot ON/OFFChildproofFlame height AdjustmentStanding pilotFan SpeedLCDLow Battery IndicatorSecond BurnerThermostatTimerProgram ThermostatWifi ....
The Spec Of RF Remote Control : * Door Control
* RF Control
* Roller Shutter Control
* Rolling Shutter Switch
* Rolling Code
* Hopping Code
* Remote Control Voltage: AC110V~AC220V(Depending on local Voltage)Loading Current: 300mADistance: 50- 250M(long range available) Size 130 x 91 x 48mmEncryption Key ....
The Spec Of RF Remote Control : Feature :
1. Receiver with sliding cap design and it is convenient for users to make adjustment.
2. SMD design for receiver module
3. Protection design for loop.
4. Voltage-transfer automatically.
5. Transmitter Memory Capacity to 120 sets
6. Encryption Key variation up to 4 billion
7. Single Chip program
8....
The Spec Of RF Remote Control : This is an RF remote control subsystem with 4-button transmitter. It is pulse type. Welcomes various types of business ranging from distributor, OEM, ODM, to CKD business. Even we can offer our products partly and separately. Any above inquiries of rf remote control are welcomed. ....
The Spec Of RF Remote Control : This is an RF remote control subsystem with 2-button transmitter with rolling code. 1. Its the active low type. You can add up to 15 transmitters per system. 2. Power requirements: (1) CS-03R2-DC: For application of 12V DC. (2) CS-03R2-AC: For application of 24V AC. ....
The Spec Of RF Remote Control : This is an RF remote control subsystem with 2-button transmitters and a receiver with 2 relays. 1. Power requirements: (1) CS-04R2-DC: Using 12V DC. (2) CS-04R2-AC: Using 24V AC. 2. Each model can be independently programmed to set the relay output mode as follows: (1) Pulse mode: The activated relay will be closed....
The Spec Of RF Remote Control : LC-stabilized design, surface mount RF transmitter. 1. Modulation: ASK (AM). 2. LC frequency: 434MHz. 3. Encoder: (1) Fixed code: TX-3312. (2) Rolling code: TX-3312R. 4. Power: 12V DC. 5. Power consumption: 5.9 (TX-3312R)/ 5.2mA (TX-3312). 6. Output power: 17.4mW (TX-3312R)/ 15.3mW (TX-3312). 7. Injection housing ....
The Spec Of RF Remote Control : TX-3312N/ (RN) is a LC-based radio frequency transmitter. 1. Modulation: ASK (AM). 2. LC frequency: 434MHz. 3. Encoder: (1) Fixed code: TX-3312N. (2) Rolling code: TX-3312RN. 4. Power: 12V DC. 5. Power consumption: 5.9 (TX-3312R)/ 5.2mA (TX-3312). 6. Output power: 17.4mW (TX-3312R)/ 15.3mW (TX-3312). 7. Injection ....
The Spec Of RF Remote Control : LC (SAW) - stabilized design, surface mount RF transmitter. 1. Modulation: ASK (AM). 2. LC frequency: 434MHz. 3. Encoder: (1) Fixed code: TX-3313, TX-3313S. (2) Rolling code: TX-3313R. 4. Power: 12V DC. 5. Power consumption: 4.9mA (TX-3313)/ 7.3mA (TX-3313S)/ 7.1mA (TX-3313R). 6. Output power: 15.2mW (TX-3313)/ 12....
The Spec Of RF Remote Control : LC (SAW)- stabilized design, RF transmitter, high performance solution for remote control type applications. 1. Modulation: AM. 2. LC: TX-3314H, SAW: TX-3314S. 3. Frequency: TX-3314H: 304MHz, 434MHz. TX-3314S: 433.92MHz. 4. Encoder: fixed code. 5. Power: 12V. 6. Power consumption: 3.65mA (TX-3314H)/ 5mA (TX-3314S).....
The Spec Of RF Remote Control : LC based radio frequency transmitter with high performance solution for remote control type applications. 1. Modulation: ASK (AM). 2. Frequency: 434MHz, 304MHz. 3. Encoder: fixed code. 4. Power: 12V. 5. Power consumption: 3.65mA. 6. Output power: 16mW. 7. Injection housing (case) size: 49 x 40 x 15mm. 8. Range: 40 ....
The Spec Of RF Remote Control : TX-3316/(R) is a LC-based radio frequency transmitter. 1. Modulation: ASK (AM). 2. LC. 3. Frequency: 434MHz. 4. Encoder: (1) Rolling code: TX-3316R. (2) Fixed code: TX-3316. 5. Power: 12V DC 6. Power consumption: 3.9mA (TX-3316)/ 6.8mA (TX-3316R). 7. Output power: 17.4mW (TX-3316)/ 16mW (TX-3316R). 8. Injection ho....
The Spec Of RF Remote Control : SAW-stabilized design, surface mount RF transmitter. 1. Modulation: AM. 2. SAW. 3. Frequency: 433.92MHz. 4. Encoder: rolling code. 5. Power: 3V/ lithium battery. 6. Range: 80 meters. 7. Channel: 1. 8. Case size: 3cm diameter. 9. Button shape available in round or oval. 10. With dock station. 11. Waterproof. ....
The Spec Of RF Remote Control : LC/ SAW- stabilized design, RF transmitter. 1. Modulation: ASK (AM). 2. LC: TX-4311, TX-4311R. 3. SAW: TX-4311S. 4. Frequence: (1) TX-4311: 304MHz, 434MHz. (2) TX-4311S: 433.92MHz. (3) TX-4311R: 434MHz. 5. Encoder: (1) Fixed code: TX-4311, TX-4311S. (2) Rolling code: TX-4311R. 6. Range: 40-80M. 7. Channel: 4. 8. Po....
The Spec Of RF Remote Control : LC/ SAW- stabilized design, RF transmitter. 1. Modulation : AM. 2. LC: TX-4312A. 3. SAW: TX-4312RSA. 4. Frequency: 434MHz. 5. Encoder: (1) Fixed code: TX-4312A. (2) Rolling code: TX-4312RSA. 6. Power: 12V DC. 7. Power consumption: 3.65mA (TX-4312A)/ 8.80mA (TX-4312RSA). 8. Output power: 15.8mW (TX-4312A)/ 18.2mW (T....
The Spec Of RF Remote Control : LC (SAW) - stabilized design, surface mount RF transmitter, high performance solution for remote control type applications. 1. Modulation: ASK (AM). 2. LC: TX-4312T, TX-4312RT. 3. SAW: TX-4312ST. 4. Frequency: 434MHz. 5. Encoder: (1) Rolling code: TX-4312RT. (2) Fixed code: TX-4312T, TX-4312ST. 6. Power: 12V. 7. Po....
The Spec Of RF Remote Control : Adjustable sensitivity. 1. Voltage: 12V. 2. Compatible with any alarm system. 3. Frequency: 2.5GHz +/- 1GHz. 4. Standby current: 11mA +/- 2Ma. 5. Max trigger output current: 200mA. 6. Input voltage: 9 ~15V. 7. Detection range sensitivity set to max: width 2100mm, length 1200mm. ....
The Spec Of RF Remote Control : Microwave (perimeter) detector. 1. Voltage: 12V compatible with any alarm system. 2. Adjustable sensitivity. ....
The Spec Of RF Remote Control : Smart shock sensor (electromagnetic). Two stage shock sensor LED indicator. ....
The Spec Of RF Remote Control : Adjustable sensitivity. Voltage: 14V compatible with any alarm system. ....
The Spec Of RF Remote Control : The receiver GS-04R2 is a 2 relay output receiver, operating at 433, 92MHz in AM/ASK modulation. It is suitable for home security system and automatic opening / closing system. The receiver has 2 relays outputs. (The detail is explain in the manual) 2 operation mode is selectable, pulse or Sustaining. The power supply....
The Spec Of RF Remote Control : The receiver GS-04R1 is a 1 relay output receiver, operating at 433, 92MHz in AM / ASK modulation. It is most suitable for garage door operator installation. The receiver can plug directly in 110/220V outlet without any external transformer or power from garage door operator. GS-04R1 has a extended flexible wire antenn....
The Spec Of RF Remote Control : 6-Button RF remote control transmitter is surface mount RF transmitter. It is the high performance solution for various remote control type applications. 1. Modulation: ASK (AM). 2. Saw. 3. Frequency: (1) 418MHz. (2) 434MHz. 4. Encoder: rolling code. 5. Power: 12V / Alkaline battery. 6. Case size: 59 x 35 x 13mm. ....
The Spec Of RF Remote Control : 1. There is no subtitle to show.
2. Defend and copy. The horse rolling type, serial number display / serial number controlling type.
3. But computer lin .
4. The capacity of remote controller is 1,000.
5. Drop the function automatically, it is adjustable to drop time automatically, stop, the alarm exports the re....
