The Spec Of Brackets : 1. Mounts any LCD flat screen off the wall about 1.5cm.
2. Meets with VESA 75 x 75 or 100 x 100mm.
3. Easy to mount with sliding bracket design.
4. Supports LCD screen up to 15kgs. 1. Weight capacity: Max 15kgs.2. Monitor mounting holes VESA 75 x 75mm or 100 x 100mm.3. LCD size 13"~26’. ....
The Spec Of Brackets : General Motor Bracket For relevant specifications, please refer to our website. ....
The Spec Of Brackets : 1. OEM & ODM are welcome.
2. Our firm Gillson are not only offer you fitting but also with various valve assembling service from our factory. Our ISO bracket dimension are available from F3 ~ F16, and our pressing factory can also based on your drawing to offer you. Bracket material with stainless steel 304 gr....
The Spec Of Brackets : Bracket is the steel plate for 2 sides from overhead mechanism box in roller shutter. Without bracket, the mechanism box does not have supporter to transmit the motor, chain. Bracket has chain, slot plug and gear mode, buyers can base their whole structure of roller shutter to choose it. Bracket is divided into d....
The Spec Of Brackets : 1. TA-B211 outdoor 90° corner bracket for wall mount bracket.
2. Material: aluminum. 1. Weight: 2.5kg, maximum load: 10kg.2. Suitable for wall mount bracket use. ....
The Spec Of Brackets : 1. For the bulb of projector.
2. Bracket. We accept OEM or ODM job. ....
The Spec Of Brackets : 1. Sotek Technology Co., Ltd., a company endeavors to be perfect on quality, service, competition, and responsibility, spinning off in 2004 from Soartek Co., Ltd. (established in 1989), now managed by Mr. Sunny Liu.
2. Mr. Liu believes quality is the only and the best way to compete and survive. This goal has stimulat....
The Spec Of Brackets : Components of automobile electronic industry. 1. An additional hole design increase the converience of usage for the users.
2. Material: aluminum alloy. ....
The Spec Of Brackets : These blocks can be used with eight clamps for the extreme with your work. This simple-to-use bracket makes clamping square work pieces easy by holding your clamps in position while you apply pressure. 1. Edual slots for fast 90 degree setup.2. Econvenient mounting holes for permanent setup.3. Edesigned for project....
The Spec Of Brackets : 1. Bracket set was accessory designed for side motor.
2. It was a necessary accessory for side motor operation.
3. Bracket set consists of gear chain, dummy ends, bearing and shaft.
4. Bracket set was usually used for the weight of door under 500kg. Operator specification:1. Gear: #530 × 50T2. Chain: #530 ....
The Spec Of Brackets : Wedge sliding bracket allow mounting both on wall and the ceiling.
Rapid replaceable fixing system provided easily & quickly mounted on wall and ceiling. Please contact us for more details. ....
The Spec Of Brackets : For all light engines and signs. We can produce any sizes and styles as your requests, welcome OEM & ODM. ....
The Spec Of Brackets : Materials are ranged from #304 (1.4301), #316 (1.4401) and carbon steel (carbon steel surface can be done by galvanizing, painting, or customer requests). Sizes are made within ISO standard F03-F16. OEM and ODM customers are welcome. ....
The Spec Of Brackets : The bracket with slide surfaces made of anti-corrosion & low friction liners. Please contact us for more informations about specifications. ....
The Spec Of Brackets : Main frame for LCD computer, TV. We offer customized products to meet customers’ requirements. ....
The Spec Of Brackets : Simple pre-filter system, the bracket can be installed 1pc 10" or 20" slim housing, strong strength can avoid breaking and changing shape. 1. Can be installed 1 stage 10" or 20" slim housing. 2. Thickness of bracket: 1.8mm. 3. Strictly painting keep bracket from rust easily. ....
The Spec Of Brackets : Due to assembly design is included with space, transmitting, strength and costˇKetc, even our manufacturing in-house is to mold and machine, we also make relative industrial products for customers.
We offer such as followings:
1. Transmitting components and devises.
2. Lock-Up components and devises.
3. Fluid com....
The Spec Of Brackets : 1. Item no: PT-6001.
2. Thread: BC 1.37" x 24T.
3. Bearings: caged (1/4" x 9). 1. Material: steel.2. Sets: 5pcs. ....
The Spec Of Brackets : D89 bracket for 12-port patch panel, standard 10 inch rack or cabinet for organizing trunk of cables to passthrough. We can provide precision OEM/ODM services, low-cost products and convenient service. ....
The Spec Of Brackets : Integrated Motor Bracket For relevant specifications, please refer to our website. ....
The Spec Of Brackets : 1. Wall bracket suitable used for blind and shade operation system. 2. Wall bracket have to operate with bracket pin stud, motor pin stud at the head side of tubular motor and end cap, bearing at the end side of motor.
3. All of the tubular motor have to insert aluminum tube for operation. Specification of ....
The Spec Of Brackets : 1. Ø28 bearing bracket was designed for tubular motor installed at the end of tube.
2. It was suitable for shutter and heavy operation system.
3. It have to opoerate with Ø12 bearing and it can offer good holding performance for operating. Specification of Ø28 bearing bracket:1. Thickness: 2.5.2. ....
The Spec Of Brackets : 1. Meets with VESA 75 x 75 or 100 x 100mm.
2. Load capacity: 12kgs.
3. Easy to mount with sliding bracket design. 1. Weight capacity: Max 12kgs.2. Monitor mounting holes VESA 75 x 75mm or 100 x 100mm.3. LCD size 13"~26’. ....
The Spec Of Brackets : 1. Meets with VESA 75x75 or 100x100mm.
2. Load capacity: 12kgs.
3. Easy to mount with sliding bracket design. 1. Weight capacity: Max 12kgs.2. Monitor mounting holes VESA 75x75mm or 100x100mm.3. LCD size 13"~26". ....
The Spec Of Brackets : 1. Universal spider mount style fits most projectors.
2. With tilt and swiverl fumction.
3. Adjustable ceiling tube can be extended from 37.5cm to 47.5cm off the ceiling.
4. Max size: 370mm in diameter.
5. Weight capacity: 25 lbs/15.5kgs
6. Cables can go through the tubes. 1. Universal spider mount style fits ....
The Spec Of Brackets : 1. Material: aluminum/beige/silver-gray.
2. Max. load: 10kg.
3. Swivel angle: 360°. 1. Tilt Angle: 90°.2. Dimensions (mm): 83(W) x 99(H) x 255(L).3. Packing: 20pcs / one carton. ....
The Spec Of Brackets : A stainless steel retaining cable. 1. Material: aluminum.2. Dimensions: 223.5mm(L). ....
The Spec Of Brackets : 1. Material: aluminum/beige.
2. Max. load: 10kg.
3. Swivel angle: 360°. 1. Tilt angle: 90°.2. Dimensions (mm): 205(L).3. Packing: 20pcs / one carton. ....
The Spec Of Brackets : 1. Dimensions(mm): 220(H) x 108(D).
2. Packing: 20pcs/one carton.
3. Application: CCTV system. 1. Material: metal.2. Max. load: 2kg.3. Swivel angle: 360°.4. Tilt angle: 120°. ....
The Spec Of Brackets : 1. L type bracket.
2. Material: metal.
3. Packing: 20pcs/one carton. 1. Max.Load: 2kg.2. Swivel angle: 360°.3. Tilt angle: 120°.4. Dimensions(mm): 225(H)x108(D). ....
