The Spec Of CNC Milling Machines : 1. MN series machines, with typical VW products features of rigid structure and high precision, are designed with 5-face function of multi-angle cutting and X-Y roller ways structure. It speeds up 3 axes rapid traverse and increases the machine's efficiency of utilization.
2. Solid beam with big cross section and ....
The Spec Of CNC Milling Machines : Features:
* Dynamically Balanced Motor and Ground Pulleys.
* Chrome-Plated and Bearing Supported Motor Shaft Provides An Extremely Smooth, Low Vibration Quiet Drive.
* High Precision Spindles Use Class 7 Angular Contact Bearings.
* Spindle Runout Guar Anteed to be Within 0.00015".
* The Dovetail and Square S....
The Spec Of CNC Milling Machines : * The bed, column, saddle and table are manufactured from high quality Meehanite cast iron, stress relieved for high stability.
* All slideways are hardened, precision ground, then coated with Turcite-B for maximum wear resistance.
* The X, Y axes are protected by stainless steel telescopic covers.
* The X, Y axis d....
The Spec Of CNC Milling Machines : 1.Max. turning diameter 20mm.
2.Both guide bush / Non guide bush holder are available for making complicated components.
3.Four axes simultaneously movement (X/Y/Z/B/C) work with main / sub tooling system.
4.With cross drilling, it works well in milling, drilling and tapping.
5.Main and sub spindle can drill simult....
The Spec Of CNC Milling Machines : 1. Guaranteed circular accuracy to 50 millionths of an inch.
2. Fanuc 0imate cnc controller (standard), fagor 8040tc controller (optional).
3. Powerful 3 hp motor (5hp-optional) with yaskawa current vector inverter drive for improved torque response at low end.
4. Spindle mounted on high precision preloaded angula....
The Spec Of CNC Milling Machines : Axis Pathways
Spindle Hole Capacity
High Rigidity Power Turret
High Precision Built in Spindle
The Spec Of CNC Milling Machines : * X, Y, Z-axis travel 800 x 500 x 550 mm.
* BT40 spindle taper.
* 8000 rpm belt drive spindle.
* 2 box ways on base.
* Choice of arm type or armless type automatic tool changer.
* Fully enclosed splash guard.
* Fanuc / Mitsubishi control system.
* Spindle oil cooler is standard equipment.
The Spec Of CNC Milling Machines : STANDARD & ACCESSORIES:
* Spindle oil cooler
* Centralize auto lubrication system
* Programmable coolant system
* Programmable air blow
* Heat exchanger for cabinet
* Work lamp
* Screw type chip conveyor
* Portable MPG hand wheel
* Alarm lamp
* RS-232 interface port
* Tool box with adjustment tools
* ....
The Spec Of CNC Milling Machines : 1.The construction fits physical design of human body, easy to operate, great stability, easy maintain.
2.Machine with rigid Casting , equips with high precision Ball Screw for precision and complicate parts cutting. It can saves machining time since it has C and Y axis for milling, turning and tapping in one cycle. I....
The Spec Of CNC Milling Machines : 1. Change sizes esaily & quickly.
2. Special designed hydraulic vise available for any position, suitable for various sizes and shapes of workpieces.
3. Process bilateral milling, quickly & accurately.
4. Best choice for power & space saving.
5. Easy operation for even non-skillful staff.
The Spec Of CNC Milling Machines : Three-axis servomotors are directly coupled to the ball screws, ensuring the least backlash and high-precision performance Special lubricating circuit ensures even lubrication. Pressure-discharge oil distributor also ensures that each oil injection spot of the slide surfaces receives equal volume of oil, with no waste ....
The Spec Of CNC Milling Machines : 1. Fully digital package control to provide high accuracy & high reliability.
2. Massive meehanite cast iron for rigidity.
3. Turcite surfaces + Hardened/ground slide way.
4. Auto power off. 1. X-Y-Z-Travel: 1650 x 750 x 650mm.2. Table size: 600 mm x 1800 mm.3. Siemens 802D control easy-to-operate and progra....
The Spec Of CNC Milling Machines : 1. It is avaiable for each aluminum meterial - short - scale multipe processing & long - scale processing.
2. Choice of working lengths: 3.5,4.5,5.5 and 6 meters.
3. Traveling colurmn features highs positioning acciracy.
4. The column longitudinal traverse is driven through servomotor combined with gear/rack ....
The Spec Of CNC Milling Machines : CNC Screw Miller is specializing in milling screws, especially for plastic injection machines and extruder machines. The bed width is 1750 mm; it has low barycenter and it could be operated stably. By moving-column structure, it is very friendly for operators to set tools, and the low operating platform is also fitted ....
The Spec Of CNC Milling Machines : *The column and bridge are annealed and stress relieved to ensure structural stability.
*Linear guideways on X and Y axes, box ways on Z axis.
*High precision pre-loaded linear guideways feature low frictional co-efficient low stick-slip and high thrust force sensitivity ensuring dynamic movement accuracy.
*6,000 RP....
The Spec Of CNC Milling Machines : 1. NC control machine.
2. Y axis square way, Z axis dove way.
3. Z axis with elevating motor.
4. Spindle speed: variable speed.
5. Mitsubishi / Fanuc control system.
6. Pneumatic tool change.
7. Inverter speed milling head is optional X, Y axis servo motor feed. 1. Table size: 1270x254 mm.
2. Table travel: 7....
The Spec Of CNC Milling Machines : *Heavy duty milling machine CK-626I
*Variable speed frequency drive allows speeds from 200 to 2250RPM
*Fold up safety handles
*Head tilts to 90o both ways. 360o rotation on horizontal surface.
*Lower noise and convenient operation
*Table locks for high rigidity
*Cast iron construction through out machine
*Forwar....
The Spec Of CNC Milling Machines : 1. Ultra-wide A-shaped Column Design
2. Full support Base Design
3. Ultra-wide Y-axis Design
The Spec Of CNC Milling Machines : 1. Standard accessories: Half-canopied canopy, tool cooling system, auto-grease system, heat-exchanger, RS232 connection line, spindle cooling system, collect holder, collect, lamp, tool set.
2. Extra accessories: full-canopied canopy, high-speed spindle, 4th axis, auto tool compensate system, air dryer.
The Spec Of CNC Milling Machines : 1.Extremely rigid cast construction:
(1) The main castings including the bed, column, saddle, and table are constructed from hing quality Meehanite castings.
(2) Extra wide base slideways combined with narrow way of straightness guide ensuring high accuracy.
(3) Hardened three Axes slideways, heat-treated table surf....
The Spec Of CNC Milling Machines : 1.Extreme Rigid casting construction:
(1)The main casting bed, column, saddle, table are constructed from high quality Meehanite Casting.
(2)Extra wide base slide ways combined with narrow way of straightness guide, ensuring high accuracy.
(3)Three Axes slide ways are hardened, the table surface is heat-treate....
The Spec Of CNC Milling Machines : 1.The construction fits physical design of human body, easy to operate, great stability, easy maintain.
2.Machine with rigid Casting , equips with high precision Ball Screw for precision and complicate parts cutting. It can saves machining time since it has C and Y axis for milling, turning and tapping in one cycle. I....
The Spec Of CNC Milling Machines : 1. X, Y, Z axis travel: 1100 x 520 x 560 mm
2. BT40 spindle taper
3. Belt drive: 8,000 rpm (standard)
Direct drive spindle provides 10,000/12,000/15,000 rpm (Option)
4. Linear ways on X, Y, Z axis
5. Arm type: 20/24 Tools
6. Fully enclosed splash guard
7. Fanuc/Mitsubishi control system
8. Spindle cooler is....
The Spec Of CNC Milling Machines : FCL-300MC Powerful Milling and Turning System Adopts the latest tool selection systems, the fastest servo turret, 3-disc clutch gear positioning and fast hydraulic locking. Tool-to-tool change 0.2 second. Powerful drilling, milling, turning, tapping as well as end milling capabilities for high efficiency integrated mac....
The Spec Of CNC Milling Machines : *Adjustable table stops for accurate stops for cuts and repeatability
*Head titls to 90. Both ways 360. Roation on horizontal surface
*Scrapping technology X, Y, Z
*Ps. The scrap technology is considered as the fundamental of the accuracy of precision machine tools
*Hardened & ground column and knee slideways
....
The Spec Of CNC Milling Machines : MSE series is particularly designed for machining delicate mold and aluminum alloy. With the ultra-wide column structure providing best rigid support, SE is able to meet requirements at high speed, high accuracy, high efficiency, and mass aluminum chip removal.
1.X, Y and Z axis equipped with Direct-Driven transmiss....
The Spec Of CNC Milling Machines : 1. MF series machines, with typical VW products features of rigid structure and high precision, are designed with box ways with hand scrapping, slant beam with three ways, direct-driven Y-Z transmission, to get the heavy cutting and precision cutting with high acceleration/deceleration control. It's the best choice....
The Spec Of CNC Milling Machines : ‧With Vision Wide tradition in making high rigidity machine structure, MHN series mot only plays a high precision indicator in 5-face machining centers but also provides a full range of high efficiency cutting performance through its rigidity structure design and excellent geometric accuracy.
‧More than 1,1m heigh....
The Spec Of CNC Milling Machines : 1.MS series portal mill machines, with typical VW products features of rigid structure and high precision, are designed with direct-driven X-Y transmission device and torque enlarger unit on X-axis, increase the X-Y moving accuracy and offer the combination control of speed and precision.
2.Twin Hydraulic cylinders pl....
The Spec Of CNC Milling Machines : 1.MB series machines, with typical VW products features of rigid structure and high precision, are designed with box ways with hand scrapping, cutting vibration adapting, and precise power transmission to get the efficient, rigid and accurate cutting.
2.Wide base with solid columns and beam, providing the best structu....
