The Spec Of Capping Machines : KWT-150 / 180 serials are cap chuck capping machine, the pick & place device which picks up the cap from the chute and places it on the container, then capping chuck tightens. PLC controlled with touch screen panel, easy access to all settings.Pick & Place device is driven by servo motor with electrical cyl....
The Spec Of Capping Machines : NCW-100 Semi automatic screw capper is designed to handle most industries such as cosmetics, food, pharmacy, etc. Compact and hand held design make it easy to use anywhere. NCW-100 Features：Equipped with rubber on the bottom to diminish cap breakage.Sealing pressure can be adjusted by torques to suits for various....
The Spec Of Capping Machines : 1. The intermittent motion automatic cap sealing machine is designed for medium production volume, versatility in bottle shape operations. 2. There are models roll-on screw cap, vial-seal roll-on, plastic cap screw-tight and press-on operations.
3. Convey belt and machine top & side covers are all made of stain....
The Spec Of Capping Machines : Functions and features of filling machine.
1. Automatic break protection for power leakage and short circuit.
2. Under-pressure protection: When incoming air's pressure is =0.5MPa, the equipment will be automatically stopped.
3. Water-shortage protection: when the level of the water tank is lower than that of the li....
The Spec Of Capping Machines : 1. Parts feeder for base supply.
2. Air compressor for cement application: 0.75kw. 1. Capacity: 1,400 pcs /hr.
2. Operator: one man.(base and cement supply).
3. Machine dimensions & weights: 3,500mm x 2,700 x 1,600 . Approx. 2,000kgs.
4. Power:
(1) main motor: 3, 220/380v, 1.5kw x 1 set.
(2) cement motor....
The Spec Of Capping Machines : Bottle your company’s drinks with ease and speed. This machine is designed for rapid filling and capping of bottles of refrigerated milk or yogurt drinks into PE bottles. It is also used to bottle pasteurized products, allowing longer shelf life such as: soy drinks, rice milk, flavored milk products , tea/ coffee pro....
The Spec Of Capping Machines : Washing, bottling and capping machines with capacity of 1,500 - 4,000 bottles per hour.
1. Applies for washing, filling and sealing all kinds of small PVC, PET bottles.
2. Applies for producing all kinds of non-gas soft drinks, such as fruit juice, fruit wine, mineral water and pure water.
3. Fully automatic bottl....
The Spec Of Capping Machines : 1.A desired capacity can be quickly and precisely acquired since a singleaxis adjusting piston is adopted in this machine.
2.Parts of the piston is contacting the liquid is made of stainless steel trated with hard chrome to enforce the surface hardness.
3.Bottle delivery line, positioning of the bottle and capping ....
The Spec Of Capping Machines : 1. Mold material: Japan SLD-11 with surface heat treatment.
2. Safety protection: operation safety door.
3. Cooling water: 60 lier per minute. 1. Power source: 3Ø 380/440V 50/60Hz.
2. Rate capacity: 10 Kva.
3. Hydraulic motor: 5Hp 380/440V 50/60Hz.
4. Controller system: PLC -- Japan Mitsubishi.
5. Driving se....
The Spec Of Capping Machines : Description:
1. Used for washing, filling pure water, distilled water, mineral water and other no bacteria liquid.
2. This machine combines auto washing bottle, filling water, cap and outputing bottle as one unit.
3. The PLC (programmable logical controller)controlling systems, which with Panasonic brand and the air....
The Spec Of Capping Machines : KWT-120 is a Semi-Auto Single Chuck Capper, it is capable to handle plastic screw cap and press-on cap. Changeover can be performed in minutes and requires minimum floor space. PLC control system.Capping head height is adjustable through hand wheel.Quick and easy product changeover time.Foot pad control.Capacity: 6....
The Spec Of Capping Machines : KWT-180AR is equipped with roll on pilfer proof closure , it is suitable for ROPP aluminum cap. PLC controlled with touch screen panel, easy access to all settings.The sealing head is sealing roller without damaging the surface of cap.Vibratory cap sorter.Fast and easy changeover.Capacity: ~ 40 BPM. ....
The Spec Of Capping Machines : KWT-130 serials are able to tighten trigger cap, pump cap, spray pump cap and regular cap. The operator places cap onto the container, the capping rollers handle the torque action automatically. PLC controlled with touch screen panel, easy access to all settings.Capping roller is driven by servo motor.Capping torqu....
The Spec Of Capping Machines : 1.Powder filling and capping are set on one machine stand. Servo motor pushes screw rod. Filling volume is set on touch-screen.
2.Changeable screw rods, suitable for different material Changeable capping locking heads, suitable for different caps.
3.Total six detecting points , working status is displayed on touch-....
The Spec Of Capping Machines : Features:
Automatic cap sealing Is designed for those bottle mouths to be sealed with aluminum cap and/or spiral-type cap.
It is also possible for sealing with plastic screw cap and the sealing requirements can be adjusted according to the materials of the cap.
A safety equipment is attached to this machine, which w....
The Spec Of Capping Machines : The NCW-200 Semiautomatic Capping Machine is capable of capping and sealing for caps in wide variety like spray cap, jar lid, safety cap, pilfer proof cap or caps in round/oval shape etc. Therefore, products from industries like cosmetics, cleanser, beverage, food production, pharmacy, chemicals can all be perfectly ad....
The Spec Of Capping Machines : 1. Combines washing, filling and rotary capping functions.
2. Suitable for packing beverage containing gas. Item NO. DCGF: 242481. Heads of washing, filling, sealing: 24,24, 8.2. Production capacity (bottle /hour): 8000-12000.3. Suitable bottle diameter (mm):￠ =50-100 H=170 330-1500ml.4. Spraying pressure(kg/cm....
The Spec Of Capping Machines : 1. We provide ODM/OEM service.
2. 8000-12000BPH.
3. You can see more information in the file. 1. Total Power (kw): 3+0.45+0.252. Total Weight (kg): 48003. Dimension (L x W x H)(mm): 3100X2100X2650 ....
The Spec Of Capping Machines : 1. We provide ODM/OEM service.
2. 8000-10000BPH.
3. You can see more information in the file. 1. Dimension (L x W x H)(mm): 2800X2100X23002. Total power (kw): 4.13. Total weight (kg): 4000 ....
The Spec Of Capping Machines : 1. Combines washing, filling and rotary capping.
2. functions.Suitable for packing beverage containing gas. Item NO. DCGF: 181861. Heads of washing, filling, sealing: 18,18, 6.2. Production capacity (bottle /hour): 4000-6000.3. Suitable bottle diameter (mm):￠ =50-100 H=170 330-1500ml.4. Spraying pressure(kg/cm2 ....
The Spec Of Capping Machines : GFR series fully automatic rinsing, filling and rotary capping combined machine.whose main techuique was imported from Italia, can realize to asepsis filling.Because it equipped with constant temperature controlling system. It can apply to fill hot frult juice. Tea and otheer beveerage into thermal proof PET bottle by ....
The Spec Of Capping Machines : 1. Used for washing, filling pure water, distilled water, mineral water and other bacteria free liquid.
2. This machine combines auto washing bottle, filling water, cap and outputing bottle as one unit.
3. The PLC(programmable logical controller)controlling systems, which with Panasonic brand and the air TAC brand....
The Spec Of Capping Machines : 1. Way of filling: gravity micro negative pressure filling.
2. Filling feedback quantity: ≤8%.
3. Applicable bottle type: bottle diameterΦ50-Φ100mm; height150-320mm; volume330-1500ml.
4. Gas source pressure (Mpa): 0.6.
5. 18000-24000BPH. 1. Model: JND 60-50-15R, JND 60-60-15R.2. Production capacity (BPH) (5....
The Spec Of Capping Machines : This machine is mainly used for wine and sauce filling operation, this machine is combined of rinsing, filling capping; the whole procedure is full auto, and suitable for glass bottle and aluminum steal-proof caps for filling vodka, wine,sauce and etc. The applicable bottle type can be adjusted freely and conveniently.....
The Spec Of Capping Machines : 1. Combines washing, filling and rotary capping.
2. functions.Suitable for packing beverage containing gas. Item NO. DCGF: 161261. Heads of washing, filling, sealing: 16,12,6.2. Production capacity (bottle /hour): 2000-4000.3. Suitable bottle diameter (mm):￠ =50-100 H=170 330-1500ml.4. Spraying pressure(kg/cm2 ....
The Spec Of Capping Machines : 1. Power source : 3Ø 380/440V 50/60Hz.
2. Rate capacity : 10 Kva.
3. Hydraulic motor : 5Hp 380/440V 50/60Hz.
4. Controller system : PLC -- Japan Mitsubishi.
5. Driving servo motor : Japan Mitsubishi.
6. Hydraulic control components : ISO certification.
7. Pneumatic air components : Japan SMC.
8. Linear slide ra....
