The Spec Of Other Cutting Machine : *User friendly
*Fast cutting speed, low operating cost and fast return on investment.
*Auto Edge finding. Effectively used in big sheets.
*The electric energy conversion heat energy conversion rate is high, and an effective power saving effect is achieved.
*Low Maintenance. without adjustments of light path and ref....
The Spec Of Other Cutting Machine : S-B34S automatic Gang Slitter for strip cutting. The S-B34S cutter shaft equipped with tapper roller bearings on each end, ensure strips with maximize accuracy for stamping press. Mechanical clamping hubs are also equipped. Easy cutter hub change without cutter shaft dismantle.
The Spec Of Other Cutting Machine : •Double layer for 4 lanes in total.
•Uses servo motor for feeding, with stable sealing abilities, and fast on speed change. Easy to change bag size, and size error is permissible.
•The machine stops as soon as materials are used up or the temperature drops 4-8 degree, or bags become superimposed.
•With conve....
The Spec Of Other Cutting Machine : Equips with MINZ Servo System, consumes no energy when not cutting.
Temperature of hydraluic fluid and motor is reduced 30%, and uses 70% less electricity comparing to traditional cutting machine.
No need to configure cutting distance with each cut up to 0.1 ton precision.
Patented Auto Pressure Commputing Tec....
The Spec Of Other Cutting Machine : *This model can use normal straight handle drill bit or oblique handle drill bit to drill holes. Furthermore it can also use annular cutter to cut holes.
*The drilling capacity is from 3mm-30mm and the cutting capacity is from 16mm-52mm.
*The up/down transmission of the tool bit is by the round shaft gear rack, so th....
The Spec Of Other Cutting Machine : *Name:HAND SPLITTER
*Type:CYM-002
The Spec Of Other Cutting Machine : HYD. Cutting M/C. 1. Power: 7.5HP.2. Max. Cutting Height: 800mm.3. Max. cutting Width: 1000mm.4. Max. Output: 1500kgs.5. Machine Weight: 1400kgs.6. Machine size: 1400x800x3200. ....
The Spec Of Other Cutting Machine : TWIN PIPE CUTTING MACHINE - PCU-14T2
Founded in 1985 has morn than 27 years of experience, PIN YING is a leading provider in developping and manufacturing of plastic extruder included downstream machinery for profiles and pipes. And today, we are striving harder that for service of customers’demands. During long tim....
The Spec Of Other Cutting Machine : 1. Unique cutters with stable cutting pressure, comply with take-off design. Block the gold-finger before gold plating, eliminate labors, lower the damage and utmost efficiency.
2. Set up data easily by X.Y motion.
3. Human Machine interface offering multi-function, manual teaching and set up parameter. Easily ope....
The Spec Of Other Cutting Machine : For EVA foam,PVC and rubber,strip cutting or side cutting. 1. Working width: 2M.2. Power: 3hp.3. Working thickness: 10-50mm.4. Productivity / hour: 1000M.5. Mechanical size cm: 240x80x140.6. Mechanical weight: 960kgs.7. Number of blade: 8.8. Blade dimenion: 200m/m. ....
The Spec Of Other Cutting Machine : Suitable for cutting various materials:
Aluminum, brass, heart dissipation pieces, PVC, plastic steel, bakelite, acrylic plastic, Teflon, honeycomb board, wood and other non-ferrous metals.
1. Adjustable clamping height.
2. Adjustable cutting speed. The operator may adjust clamping height and speed and cutting heigh....
The Spec Of Other Cutting Machine : *Product: Inverter Air Plasma Cutting Machine
*Model: AP-43
*Rated Output Current: 10~40A
*Rated Duty Cycle: 60%(10Min.)
*Dimension: 211 x 400 x 240MM
*Weight:14.5KG
*Feature: Narrow Kerfs, Less Deformation, Easy Operation; Low Power Consumption, Excellent Ignition; Compact Size and Lightweight.
Application: U....
The Spec Of Other Cutting Machine : * This machine is an automatic device used cutter to turning commutator dia.
* The armature put on the V-block by operator.
* The belt device goes downward to oppress the lamination, then start turning.
* And the machine will automatic cutter forward -> turning -> cutter backward (cutter back to original posit....
The Spec Of Other Cutting Machine : 1.The main frame of the machine is welded from square steel, strong structure, high strength and no deformation.
2.The machine has horizontal, vertical and cross cutting devices, and can realize 3-direction cutting horizontal, vertical and cross cutting.
3.The machine adopts converter speed governing advantageous in ....
The Spec Of Other Cutting Machine : *Capable of any cut between 45 and 90 degrees.
*Able to simultaneously process 4 feet or 8 feet, combines two machines in one unit in stead of separate machines for cost saving.
*Depending on customer needs, single or multi-head machining processes are available for varied operation.
*Customized machines with specia....
The Spec Of Other Cutting Machine : Our core products are veneer cutting machines, We have a wide variety of them available, with all dimensions prepared, If you can't find any of them you want, We can help you customize the machine you want.
The Spec Of Other Cutting Machine : Our machine is solid for long time using, the operation and adjustment are easy and machine is powerful. We choose the best material and heat treatment, plus well-designed machine structure to achieve machine precise and long-life time. CAPACITY: Diameter 6~20mm x Length 50~300mmOUTPUT: ....
The Spec Of Other Cutting Machine : ‧ Cutting power up to 15mm
‧ Adjustable digital electric current display.
‧ Fully compatible with automatic cutting equipment.
‧ With high frequency mode start & Touch-Free pilot arc initiation.
‧ Over heat and Over current protection equipped.
The Spec Of Other Cutting Machine : * TYPICAL APPLICATIONS OF WATERJET CUTTING SYSTEM:
The waterjet cutting system is suited for cutting a wide variety of materials. Waterjet cutting creates no thermal effect, strain, tearing or choking problems. Two cutting systems are usually applied as shown in the examples below.
A: WATERJET CUTTING
Simply apply a....
The Spec Of Other Cutting Machine : 1. For trimming two corners (round or straight of booklets, cards, papers, boards & etc.). User friendly allow quick 2 easier adjustment of size and knife changes.
2. Specially designed intermittent running, motor does not run until cutting operation is being performed that saves power consumption greatly. Also, ....
The Spec Of Other Cutting Machine : Large Cutting Machine
* Horizontal cutting with automatic feeding or choose hand-wheel pushing.
* The twin vises of spiral type are desinged to grip sample securely during operation.(including sample with irreqular shapes)
* Large window for monitoring the cutting operation.
* High capacity circulating coolant may ....
The Spec Of Other Cutting Machine : Features:
1. This machine is adopted electric heat forming and coupled with molding which can be formed & cut once, the will reduced the error which generated by cutting & in-formalized of operator labor & time saving, not to need professional operator.
2. This machine is suitable for hot-pressing forming & embossing....
The Spec Of Other Cutting Machine : 1. This cutter adopts the advanced frequency conversion system.
2. Automatic number controlled.
3. Its operation is handy and cutting is exact.
4. This machine is suitable to cut horizontal sheet for several sponge once.
5. It is controlled by digital system and frequency conversion system. 1. Max. product s....
The Spec Of Other Cutting Machine : Equips with MINZ Servo System, consumes no energy when not cutting.
Temperature of hydraluic fluid and motor is reduced 30%, and uses 70% less electricity comparing to traditional cutting machine.
No need to configure cutting distance with each cut up to 0.1 ton precision. Swinging requires less than 1kg strength....
The Spec Of Other Cutting Machine : Equips with MINZ Auto Pressure Cutting System, provides up to 0.1 ton of cutting precision. Reduce consumption of cutting dies and boards.
Patented turret stores up to 40 cutting dies, electric maget picks and returns cutting dies. No need to make toolings for cutting dies, suitable for all cutting dies.
Auto nes....
The Spec Of Other Cutting Machine : Our machine is solid for long time using, the operation and adjustment are easy and machine is powerful. We choose the best material and heat treatment, plus well-designed machine structure to achieve machine precise and long-life time. special designOEM/ODM accept. ....
The Spec Of Other Cutting Machine : •Equipped with double servo motor and double photo sensor. Operating simultaneously with double line of di fferent sizes of printing bags and plain bags.
•Machine stops when abnormality is detected.
•With conveyor.
•Hot pin positions can be moved freely.
•Equipped with double line rear feeding device and ....
The Spec Of Other Cutting Machine : 1.Suitable for any brand of Plane Cutting Machines, each system is tailored-made according to hydraulic designs of different brands.
2.Machine consumes almost no electricity when it's idling. Through MINZ's specially designed utility servo motor, European designed IGP and controller, average energy saving is 7....
The Spec Of Other Cutting Machine : 1.Equips with MINZ Energy System,consumes no energy when not cutting.Temperature of hydraluic fluid and motor is reduced 30℅,and uses 70℅less electricity comparing to traditional cutting machine.
2.Option add-on Barcode Scan System to instantly set up each Cutting Die's required cutting distance,Remote Manage ....
