The Spec Of Paper Cutting Machines : CY-A4 Paper Packing Machine can pack A4 copy sheets(210X297mm),B5 copy sheets(182X257mm) and 16K copy sheets(195X270mm) Model:CY-A4 Paper Packing MachineSpeed:10-15pcs/minPacking size:210X297X50MMPower:5KWAir Compressor:0.5-0.7mpaMachine size:4600x940x1400mmMachine weight:1350kgVideo: http://www.tudou.com....
The Spec Of Paper Cutting Machines : Suitable for cutting various materials:
Aluminum, brass, heart dissipation pieces, PVC, plastic steel, bakelite, acrylic plastic, Teflon, honeycomb board, wood and other non-ferrous metals.
1. Adjustable clamping height.
2. Adjustable cutting speed. The operator may adjust clamping height and speed and cutting heigh....
The Spec Of Paper Cutting Machines : 1. For cutting single face (2 ply) board only.
2. Cutting length 400-1500 mm, within ± 3mm Cutting length digitally displayed. ....
The Spec Of Paper Cutting Machines : 1. Using when making an order change or to remove poor quality sheet.
2. When the "cut" button is pushed, the clutch is engaged and the sheet is cut.
3. When the sheet has been cut, the clutch disengages. The brake will emergently stop the upper and lower knives; this allows sheets to pass from rotary she....
The Spec Of Paper Cutting Machines : 1. Style: Floor platform.
2. Extreme width of paper-cut: 550mm.
3. Extreme thickness of paper-cut: 95mm.
4. Cutting mode: Adopt hydraulic cutting mode-accurate, quiet & clear-cut.
5. Pressure controls: Adopt hydraulic pressure regulation, can meet anypaper types from 30kg/cm2 to 120kg/cm2.
6. Illumination....
The Spec Of Paper Cutting Machines : 1. For trimming two corners (round or straight of booklets, cards, papers, boards & etc.). User friendly allow quick 2 easier adjustment of size and knife changes.
2. Specially designed intermittent running, motor does not run until cutting operation is being performed that saves power consumption greatly. Also, ....
The Spec Of Paper Cutting Machines : 1. Especially for cutting the single face cardboard transverse and vertical.
2. According to the width of paper, it could cut 2 to 4 cardboards, and cuts the paper vertical then cuts it transverse immediately. Cutting cardboard are exported by special conveyer which can deliver them to the specific stacker and are ba....
The Spec Of Paper Cutting Machines : 1. Interlocked with any label printer to cut off the printed label-web in sheets automatically.
2. The sheeting amount can be set up and stop automatically & with alarm voice when it achieved.
3. Jogging button for sheeting test can save more your printed product.
4. Conveyor with motor, the products after sheeting....
The Spec Of Paper Cutting Machines : 1. Labor-saving and simple operation. Low trouble rates. Very strong cutting power, rapid cutting speed (above 1,000 times/hr).
Easily accessible micro-adjustment device for optimum cutting strokes, thus lengthening the service life of the knife mold and the cutting board.
2. Cutting-off distance adjustable between....
The Spec Of Paper Cutting Machines : 1. Applicable for cutting paper core of all kinds of papers, tapes and non woven geotextile.
2. Suitable for simple paper core cutting and easy to use.
3. Order to make for different diameters of paper cores. 1. Suitable for manual cutting for paper core and polymeric tapes.2. Paper core-cutting width: 10-500mm.3....
The Spec Of Paper Cutting Machines : Holder at the end; cutting position with cutting anvil, air friction ring, orientation trough, and pneumatic cutting shelf. Dimension: L 157cm x H 137cm, GW: 70kgs. ....
The Spec Of Paper Cutting Machines : 1. Ideally suited for straight cut of materials paper, PVC plastic film, soft metal sheet, hard paper board, rubber sheet, wood veneer, leather, cloth.
2. Employees the speed reducing motor for controlling cutter drive, permitting for noise free and convenient operations.
3. Can add air table, working piece can be ....
The Spec Of Paper Cutting Machines : 1. Machine seat is constructed & combined by high strength casting operates stably & cuts exactly. Robust Construction ensures stable op eration and exactly cutoff.
2.Cutting operation by warm wheel shaft. Cutting knife is driven by worm gear; providing excellent cutting accuracy.
3. Specially designed powe....
The Spec Of Paper Cutting Machines : * Machine seat is constructed & combined by high strength casting operates stably & cuts exactly. Robust Construction ensures stable operation and exactly cut off.
* Inverter-controlled computer with 8.4 inch touch screen highly precision cut for 0.01m/m.
* Colorful touch screen with 24,600 point memory allow....
The Spec Of Paper Cutting Machines : * Infra red photocells guards CE in (L)
* Inox table, cast iron frame.
* Time- limited two hands cut control with inhibition of successive cut.
* 7” Touch screen program with universal language (using simple signs).
* Foot pedal for pre-pressing to insure a better-cut accuracy.
* Hydraulic knife cut for high qua....
The Spec Of Paper Cutting Machines : Suitable for cutting various materials:
Aluminum, brass, heart dissipation pieces, PVC, plastic steel, bakelite, acrylic plastic, Teflon, honeycomb board, wood and other non-ferrous metals.
1. To operate the machine, simply treadle on the foot switch, the machine will automatically perform clamping and cutting for co....
The Spec Of Paper Cutting Machines : Suitable for cutting various materials:
Aluminum, brass, heart dissipation pieces, PVC, plastic steel, bakelite, acrylic plastic, Teflon, honeycomb board, wood and other non-ferrous metals.
1. To operate the machine, simply treadle on the foot switch, the machine will automatically perform clamping and cutting for co....
The Spec Of Paper Cutting Machines : Suitable for cutting various materials:
Aluminum, brass, heart dissipation pieces, PVC, plastic steel, bakelite, acrylic plastic, Teflon, honeycomb board, wood and other non-ferrous metals. 1. To operate the machine, simply treadle on the foot switch, the machine wil automatically perform clamping and cutting for ....
The Spec Of Paper Cutting Machines : 1. Suitable for cutting various materials:
Aluminum, brass, heart dissipation pieces, PVC, plastic steel, bakelite, acrylic plastic, Teflon, honeycomb board, wood and other non-ferrous metals.
2. Equipped with additional safety guard, power off when door opened, CE certified electronic parts and control. 1. To op....
The Spec Of Paper Cutting Machines : Suitable for cutting various materials:
Aluminum, brass, heart dissipation pieces, PVC, plastic steel, bakelite, acrylic plastic, Teflon, honeycomb board, wood and other non-ferrous metals. 1. Automation feed, positioning, oil splashing and sawing. 2. Feed stroke 1400mm/3000mm/6000mm. (Reciprocating feed stroke up....
The Spec Of Paper Cutting Machines : Suitable for cutting various materials:
Aluminum, brass, heart dissipation pieces, PVC, plastic steel, bakelite, acrylic plastic, Teflon, honeycomb board, wood and other non-ferrous metals. 1. Automation feed, positioning, oil splashing and sawing. 2. Feed stroke 1400mm/3000mm/6000mm. (Reciprocating feed stroke up....
The Spec Of Paper Cutting Machines : 1. Suitable for cutting various materials: aluminum, brass, heart dissipation pieces, PVC, plastic steel, bakelite, acrylic plastic, Teflon, honeycomb board, wood and other non-ferrous metals.
2. The hidden sawblade raises form the bottom and horizontally cuts workpieces in a straight lines. After cutting the sawblade....
The Spec Of Paper Cutting Machines : 1. Suitable for cutting various materials:
Aluminum, brass, heart dissipation pieces, PVC, plastic steel, bakelite, acrylic plastic, Teflon, honeycomb board, wood and other non-ferrous metals.
2. Automation feed, postioning, oil splashing and cutting. 1. Horizontal align: allows material to lean on the baffle pla....
The Spec Of Paper Cutting Machines : Suitable for cutting various materials:
Aluminum, brass, heart dissipation pieces, PVC, plastic steel, bakelite, acrylic plastic, Teflon, honeycomb board, wood and other non-ferrous metals. 1. To operate the machine, simply treadle on the foot switch, the machine will automatically perform clamping and cutting for....
The Spec Of Paper Cutting Machines : 1. Suitable for cutting various materials:
Aluminum, brass, heart dissipation pieces, PVC, plastic steel, bakelite, acrylic plastic, Teflon, honeycomb board, wood and other non-ferrous metals.
2. Equipped with additional safety guard, power off when door opened, CE certified electronic parts and control. 1. To o....
The Spec Of Paper Cutting Machines : 1. Suitable for cutting various materials:
Aluminum, brass, heart dissipation pieces, PVC, plastic steel, bakelite, acrylic plastic, Teflon, honeycomb board, wood and other non-ferrous metals.
2. 45° Double-blade angular sawing machine. 1. To operate the machine, simply treadle on the foot switch the machine wil....
The Spec Of Paper Cutting Machines : BALE FOR CUTTING VARIOUS MATERIALS:
Aluminum, Brass, heart dissipation pieces, PVC, plastic steel, Bakelite, acrylic plastic, Teflon, honeycomb board, wood and other non-ferrous metals.
2. 45°Double-blade angular sawing machine. 1. When the foot panel switch is pressed the machine will perform material clamping ....
The Spec Of Paper Cutting Machines : Suitable for cutting various materials:
Aluminum, brass, heart dissipation pieces, PVC, plastic steel, bakelite, acrylic plastic, Teflon, honeycomb board, wood and other non-ferrous metals. 1. The machine is suited for end jointing operation for door and window frames. 2. The clamping height is adjustable. 3. Auto....
The Spec Of Paper Cutting Machines : 1. Suitable for cutting various materials:
Aluminum, brass, heart dissipation pieces, PVC, plastic steel, bakelite, acrylic plastic, Teflon, honeycomb board, wood and other non-ferrous metals.
2. Double head cutting. 1. Used for aluminum profile cutting. 2. The linear guiding pair ensured steady processing accura....
The Spec Of Paper Cutting Machines : 1. Suitable for cutting various materials:
Aluminum, brass, heart dissipation pieces, PVC, plastic steel, bakelite, acrylic plastic, Teflon, honeycomb board, wood and other non-ferrous metals.
2. Aluminum connecting end cutting saw. This is the new machine type designed for the aluminum curtain-wall and lighting ....
