The Spec Of Plastic Cutting Machines : •Double layer for 4 lanes in total.
•Uses servo motor for feeding, with stable sealing abilities, and fast on speed change. Easy to change bag size, and size error is permissible.
•The machine stops as soon as materials are used up or the temperature drops 4-8 degree, or bags become superimposed.
•With conve....
The Spec Of Plastic Cutting Machines : Sj-h Elevator Rotary Head Pe Film Blowing Machine
It is used for blowing various plastic film Of Low Density Polyethylene (LDPE), high Density Polyene (HDPE) and Linear Low Density Polyethylene (LLDPE)etc., which are widely Used For Packing Liquid, industrial Products, garments And Textile And Printing Lamination.e....
The Spec Of Plastic Cutting Machines : *APPLICATION: For cutting rubber,EVA into chunks.
*FEATURES: Four high speed rotating blades high production rate.
The Spec Of Plastic Cutting Machines : Suitable for cutting various materials:
Aluminum, brass, heart dissipation pieces, PVC, plastic steel, bakelite, acrylic plastic, Teflon, honeycomb board, wood and other non-ferrous metals.
1. Adjustable clamping height.
2. Adjustable cutting speed. The operator may adjust clamping height and speed and cutting heigh....
The Spec Of Plastic Cutting Machines : Application:
This cutting machine is mainly for cutting natural rubber, synthetic rubber and other plastic materials. Plastic wastes in the market are mostly larger in the volume, which needs to be cut into smaller pieces before processing so as to meet the required inlet diameter of the equipment in the following pro....
The Spec Of Plastic Cutting Machines : Application: rain wear, neoprene diving suit, fishing suit, marine, waterproof hand bag, nylon tent, ski jacket. 1. Slanting by a 15 degrees angle and possessing an excellent view. The machine can be operated in a more flexible way and in accordance with human body science.
2. The hot tuyere moves in accodance wit....
The Spec Of Plastic Cutting Machines : 1. This unit designed especially for all kinds of data pocket : from material in feeding to finished product, It may be completed on production line which will save labor cost and increase production capacity.
2. This unit uses special synchronous cutting and sealing to enable the size of the data bag on production t....
The Spec Of Plastic Cutting Machines : 1. Model of Low power consumption and low pollution servomotor + NC control–automatic circular saw.
(1) Automatic clamping-sawing.
(2) Cutting application for mild steel/stainless steel tube, bar and irregular profile.
2. Cutting features:
(1) Adopts planetary gear system-lower power consumption than worm gear ....
The Spec Of Plastic Cutting Machines : 1. Application: suitable for grinding the trimming and cutting tool of rubber parts, plastic parts, PU parts.
2. Features:
(1) Is available to grind knife of the sharp angle and arc angle.
(2) Attached with diamond grinding wheel, and is able to grind for tungsten carbide. It is sharp and fast.
(3) Make the knife....
The Spec Of Plastic Cutting Machines : 1. Computer control
2. High speed
3. Easy operate Bag Making Width 100-600mmBag Making Length 30-990mmBag Making Speed 30-120pcs/minElectric Heat Power 380V.50Hz.2.0kwPower of Main Motor 1.1kwFilm Thickness 0.01-0.05mmOverall Dimensions(L×W×H)mm 3500×1160×....
The Spec Of Plastic Cutting Machines : 1. This machine is welded by high quality square tube and steel plate with compact configuration and good shape.
2. It is cut by electro thermal wire with smooth cutting mark.
3. The machine adopts transducer to control the motor speed with convenient adjustment, stable running, low noise and veracious product size.
....
The Spec Of Plastic Cutting Machines : 1. Applicable to the cutting and winding of paper, clothe, plastic, and leather.
2. This equipment utilizes PLC control, and is equipped with malfunction detection system. It can select one or multiple dimensions for automatic exchange and cutting.
3. The range settings for cutting width are large. Utilizes progressi....
The Spec Of Plastic Cutting Machines : 1. Labor-saving and simple operation. Low trouble rates. Very strong cutting power, rapid cutting speed (above 1,000 times/hr).
Easily accessible micro-adjustment device for optimum cutting strokes, thus lengthening the service life of the knife mold and the cutting board.
2. Cutting-off distance adjustable between....
The Spec Of Plastic Cutting Machines : For plastic, rubber, PVC, foam cutting. Designed for cutting plastic, acrylic, polylon, bakelife, foam and rubber tire. ....
The Spec Of Plastic Cutting Machines : Newly design, suitable for plastic film factory, to make the plastic film sample. 1. Rubber core: Ø250 ~ Ø300.
2. Electric offer: 220V ~ 380V.
3. Machine width: 1,000 ~ 1,600mm. ....
The Spec Of Plastic Cutting Machines : •Double layer for 8 lanes in total.
•Uses servo motor for feeding, with stable sealing abilities, and fast on speed change. Easy to change bag size, and size error is permissible.
•Machine stops when abnormality is detected.
•With auto punching unit.
•Hot pin positions can be moved freely.
•Able to pro....
The Spec Of Plastic Cutting Machines : •Equipped with double servo motor and double photo sensor. Operating simultaneously with double line of di fferent sizes of printing bags and plain bags.
•Machine stops when abnormality is detected.
•With conveyor.
•Hot pin positions can be moved freely.
•Equipped with double line rear feeding device and ....
The Spec Of Plastic Cutting Machines : 1. SY-C103 #25 collet chuck type oil seals trimming machine.
2. Application: suitable for inner and outer diameter of oil seals trimming.
3. Features:
(1) Uses ＃25 collect chuck easy and quick to change mold and knife.
(2) Three types of the machine ,single knife, double knife and three knife trim efficiently.....
The Spec Of Plastic Cutting Machines : 1. SY-C103-45 #45 collet chuck type oil seals trimming machine.
2. Application: suitable for A and B type oil seals with large-sized diameterand general rough products trimming.
3. Features:
(1) Use #45 collet chuck, quick and easy to change mold and knife.
(2) Three types of the machine, single knife, double kn....
The Spec Of Plastic Cutting Machines : 1. SY-R103 ring cone type oil seals trimming machine.
2. Application: special use for A type oil seals trimming.
3. Features:
(1) Need no other mold and lowest cost.
(2) Auto feeding and throwing down, one operator can operate 2-3 sets of machine simultaneously.
(3) Single slide block to trim the inner and Oute....
The Spec Of Plastic Cutting Machines : 1. SY-RT103 ring cone type oil seals trimming machine (double knife blocks type).
2. Application: special use for A type oil seals trimming.
3. Features:
(1) Needs no other mold, and lowest cost.
(2) Auto feeding and throwing down ,one operator can operate 2-3 sets of machine simultaneously.
(3) Trimming by doub....
The Spec Of Plastic Cutting Machines : 1. SY-V103 vacuum-type oil seals, cups, packing trimming machine.
2. Application: suitable for trimming oil seals, cups, packing, and soft rubber parts, etc.
3. Features:
(1) Use vacuum mold and the characteristic of vacuum to trim.
(2) The inner diameter and outer diameter can be trimmed simultaneously or indiv....
The Spec Of Plastic Cutting Machines : 1. SY-103-S vacuum type oil seals trimming machine.
2. Application: suitable for trimming inner and outer diameter of various oil seals.
3. Feature: manual feeding, auto blowing off products by air pressure and separate finished goods form bur to pack respectively to save the time of arrangement. 1. Power: motor....
The Spec Of Plastic Cutting Machines : 1. SY-V103SF vacuum type oil seals trimming machine.
2. Application: Suitable for trimming inner and outer diameter of various oil seals.
3. Features:
(1) Manual feed, vacuum type, and auto trim.
(2) Add on the light curtain and fence to protect workers and keep factory clean. 1. Power: electromagnetism clut....
The Spec Of Plastic Cutting Machines : 1. SY-V103-PU3T vacuum type PU oil seals, packing, cups trimming machine.
2. Application: suitable for trimming large-sized oil seals, packing, cups, with different height of inner and outer diameter.
3. Features:
(1) Adopts pressurized trimming to overcome the uneasy fixation of the large-sized working pieces.
....
The Spec Of Plastic Cutting Machines : 1. SY-RA104 auto rotary type trimming machine (4-Station Type).
2. Application: Suitable for the trimming of the huge quantity and less type oil seals, cups, packing, and soft rubber parts, etc.
3. Features:
(1) Auto feeding, one opeator can operate many sets of machine simultaneously to increase the working effic....
The Spec Of Plastic Cutting Machines : 1. Application: suitable for square RING cutting (after rubber tube shaping).
2. Features:
(1) Equip with servo motor and proface touch control for thickness cutting precisely .It is easy to operate and adjust.
(2) Use precise linear motion guide, servo motor and NC operation to cut precisely and quickly.
(3) Af....
The Spec Of Plastic Cutting Machines : 1. Application: suitable use for square ring cutting (after rubber tube shaping).
2. Features:
(1) Equip with servo motor and proface touch control for thickness cutting precisely. It is easy to operate and adjust.
(2) Use precise linear motion guide, servo motor and NC operation to cut precisely and quickly.
(3) ....
The Spec Of Plastic Cutting Machines : 1. Square ring cutting machine (4 shaft type).
2. Application: suitable use for square ring cutting (after rubber tube shaping).
3. Features:
(1) Equip with servo motor and proface touch control for thickness cutting precisely .It is easy to operate and adjust.
(2) Use precise linear motion guide, servo motor an....
The Spec Of Plastic Cutting Machines : 1. Application: suitable for grinding the trimming and cutting tool of rubber parts, plastic parts, PU parts.
2. Features:
(1) Is available to grind knife of the sharp angle and arc angle.
(2) Attached with diamond grinding wheel, and is able to grind for tungsten carbide. It is sharp and fast.
(3) Make the knife ....
