The Spec Of Press Machines : •Advanced German made Schneider Hydraulic Servo system with pressure valve to precisely control the speed, volume and pressure of oil flow.
•To control RAM stroke distance on both ends, hence the height and depth of each punch becomes programmable with 0.1mm accuracy faster punching speed.
•HPS1250X is with 249....
The Spec Of Press Machines : CNC/ DA-65W System On Windows Functions:
1.European DELEM multi-axis controller. Workpiece and tooling are displayed in color graphics.
2.Automatic workpiece length calculation.
3.Graphical simulation of bending sequences. Display of workpiece profiles before and after bending.
4.Automatic tonnage output calculatio....
The Spec Of Press Machines : S-B110 Automatic Transfer Press specially designed to produce aerosol top end, spray lid and threaded oil end. It can be built for single lane or double lanes depending on end size. Max.number of the tooling can be 9 stations for each lane. Capacity can be 100~150 strokes per minute. Therefore, max.capacity can reach 3....
The Spec Of Press Machines : The equipment installed with press mould for metal parts processing. The feature are:
1.Strong body and puncher, and simple maintenance.
2. Cushions are attached on both ends for stable operation (Please note on the order if the product without cushions).
3. Magnet as optional accessory for sensor switch use.
4. To....
The Spec Of Press Machines : The machine has the 20T,40T,60T,80T-150T types(pressure)with the draw-out working table,which is safe and convenient to operate.
The Spec Of Press Machines : Equips with MINZ Servo System, consumes no energy when not cutting.
Temperature of hydraluic fluid and motor is reduced 30%, and uses 70% less electricity comparing to traditional cutting machine.
No need to configure cutting distance with each cut up to 0.1 ton precision. Swinging requires less than 1kg strength....
The Spec Of Press Machines : 1. 2 stages of mold open-close speed design expends the lifetime of mold by avoiding direct hitting mold and ensure the quality of tube after curing.
2. Special design, internal junction structure, is available for platen use and not use base on customers' need.
3. Special design, drill platen, applied equal he....
The Spec Of Press Machines : 1. Offering comprehensive range of machinery.
2. Any special request will be welcome, either by e-mail or fax message.
3. It is our ultimate goal to supply quality products with timely delivery and efficiency services to satisfactory our customers. Capacity: 100 ton-1500 ton. ....
The Spec Of Press Machines : Product's application-fields:
oil seals for vehicles and motorcycles, O-rings, U-type gaskets, rubber parts, medication plugs and silicon plastics, etc.
Mechanical structure characteristics:
The machine's body is built by a single-piece structure with high tensile strength and tenacity. The side plate ....
The Spec Of Press Machines : 1. Simple and evident to operate.
2. PLC circuit, high accuracy and low rate of breakdown.
3. The plastic plate moves periodically to lengthen its life. 1. Model: PS-618A; PS-618B.2. Working area (mm): 1,400 x 750; 1,400 x 1,100.3. Motor: 7 1/2 HP.4. Stroke (mm): 200.5. Maximum force: 150 Tons.6. Mechanical dimen....
The Spec Of Press Machines : 1. Mold opening and closing by air cylinder, action automatically.
2. Electrical control system by IC plate and timer.
3. Inner pressure controlled by piston valve (made in japan).
4. Floating plate with leak-proof special design, excellently leak-proof purpose by U seal. Air exhausted quickly, increase curing eff....
The Spec Of Press Machines : 1. Hydraulic micro adjustment.
2. LCD control system.
3. Sliding track protector.
4. Injection wax device.
5. Neutron system.
6. Photoelectric safety device. 1. Raising capacity (ton): 40.2. Slide stroke (mm): 1200.3. Open height daylight (mm): 1200.4. Slide area (mm): 1300x1000.5. Bolster area (mm): 1300x1000....
The Spec Of Press Machines : 1. Straight-arm and higher rigid mechanism. Design of the machine will affectively prevent the opening in traditional twisting; frame structures lower change of frame shape.
2. Special crank design with lower clearance can effectively decrease heat expansion.
3. Special plunger guide (pillars) and 2 post guides desig....
The Spec Of Press Machines : 500T 12D hot press for fancy plywood. 1. Capacity tons 500.2. Pressure upon products Kg/cm^2 14.3. Ram for pressing xST mm 375x1000-2Sets.4. Ram for rising xST mm 150x1000.5. Platen dimension LxWxT mm 2590x1370x40.6. Daylight mm 80.7. Nos. of platen sheet 13.8. Nos. of daylight 12.9. Closing speed mm/Min. 4800.10. ....
The Spec Of Press Machines : 1. Hydraulic press 80T.
2. Strict quality control, best performance, superior quality, complete range of models, simple and easy maintenance, long service life, high reliability. According to cutomer's designs and specifications. Please Contact Us. We shall proceed your request and you will receive our reply very ....
The Spec Of Press Machines : Application: for punching of various shapes of holes (e.g. round, oblong, square & etc.) on papers, plastic or leather for binding with spiral, comb, computer or loose leaf binders. Tooling is available on request. 1. Model: HC-36TR.2. Rivet holder to floor distance: 930 mm.3. Motor: 2 HP.4. Machine dimensions ....
The Spec Of Press Machines : • Using for wide range of mechanical parts; such as bends deforms; combined for reformation or shaft bearing; gear; press in or extruded
• It designed with double speed of high and low pressure. • Included pressure release valve; it will release pressure back to 350 tons when the pressure over 40 kgs ....
The Spec Of Press Machines : * Quick heating with power electric heat. It takes only 10~12 minutes from start to ejection of a complete cooled mount.
* Readable pressure gauge, the maximum machinery pressure is 250kg/pressure required 150kg/.
* The termostatic control is a 0~399¢XC digital display, the temperature of mold required 150~180¢XC.
....
The Spec Of Press Machines : 1. WF67Y economical torsion synchronization press brake.
2. T Screw drives back gauge moving forward and backward.
3. Integrated hydraulic system of domestic famous brand.
4. Clip-and-sleeve oil pipe and joint.
5. SCHNEIDER key electrics.
6. ACL special-purpose digital display system.
7. Imported two-layer seals ....
The Spec Of Press Machines : Hydraulic Movable Shoe Pad Forming Pressing Machine
Features :
1. This machine is suitable for various EVA products, as: sole,
movable shoe pad & beach shoes etc.., cooling forming.
2. This machine is designed of double columm structure which can be
resisted big pressure, long servicing life and high ten....
The Spec Of Press Machines : 1. Heavy-duty frame:
(1) The construction is welded by large-scale I beam and channel beam.
2. High-grade hydraulic cylinder:
(1) The piston rod is handed and hard-chrominm plated.
3. Compact hydraulic power unit:
(1) First level quality in the area.
4. Operation panel:
(1) Operated by a handle for down/up.
....
The Spec Of Press Machines : 1. Strong power- this punching machine is operated by hydraulic pressure.
2. Easy time setting- with timer which is different from conventional method.
3. Low noise hydraulic press punching-Do not need to bear the noise from cam press punching.
4. With foot switch for operation convenience. Save time and increase....
The Spec Of Press Machines : We can offer the service of metal deep drawing, metal stamping, metal fabrication to our customers. We supply our best quality and on time delivery to you requirement by OEM/ODM. ....
The Spec Of Press Machines : We can provide beam shear and press brake in any specification according to our customers' requirements. Main technology data: 1. Nominal pressure: 1600KN. 2. Length of working table: 4000mm. 3. The distance of column: 3100mm. 4. Slide stroke: 200mm. 5. Number of strock: ≥6. 6. The depth of throat: 320mm. 7....
The Spec Of Press Machines : Tailift CNC Servo-Hydraulic Press Brake is designed with double upward moving cylinders, allowing the sheet metal to remain at the same working height. This ensures bending accuracy and operational convenience.
The Spec Of Press Machines : Flat bed hydraulic press brake (good for steel furnitures production). 1. Resolution: 0.01 mm.2. Accuracy: 0.01 mm.3. Program storage: 150.4. Step number: 16 MAX.5. Program repeat： 9999 MAX.6. Pressing length 1200~4000 mm for 80 ton 300 ton. ....
The Spec Of Press Machines : NC-05 System Functions
1.Adopt AC servo motor. Free of carbon brush and maintenance.
2.Speed of back gauge: 1000 rpm.
3.Min. Preset Unit: 0.01mm.
4.Accuracy of back gauge(X axis): 0.01 mm
5.(G point of Servo motor is taken as the basis point).
6.The max. number of drawing number to be memorized is 156.
7.Each dr....
The Spec Of Press Machines : FEATURE
1.The machine structure is C-frame. All the parts are included in machine body, the operation is safe and simple.
2.Design is simple and free of trouble..
3.The machine is multiple purpose, we are able to modify the design and enchance functions to meet your specialrequirements.
APPLICATIONS
1.Press in a....
The Spec Of Press Machines : FEATURE
1.The machine structure is C-frame. All the parts are included in machine body, the operation is safe and simple.
2.Design is simple and free of trouble..
3.The machine is multiple purpose, we are able to modify the design and enchance functions to meet your specialrequirements.
APPLICATIONS
1.Press in a....
