The Spec Of Other Inspecting & Testing Machine : This machine is designed for plastic bottles / containers leak testing. Specially for bottle makers, soft drinks, motor oil, lubricants, detergent and chemical industries to ensure bottle quality before liquid filling.
The Spec Of Other Inspecting & Testing Machine : There are three detectors to detect tire left side wall, right side wall and tread position. The detector is actuated by air cylinder to detect tire run-out condition while tire running. This detect singal will be input into computer to be analyzed by software and displayed on monitor in order to judge the tire wobblin....
The Spec Of Other Inspecting & Testing Machine : •Designed and manufactured in accordance with ASTM D623 & ISO 4666 standards.
•By means of applying constant load and compression frequency to the test specimen, our flexometer could help user to understand the history of Heat Built-up and dynamic fatigue properties of rubber compounds. For example, while tes....
The Spec Of Other Inspecting & Testing Machine : THIS TESTER IS DESIGNED SPECIALLY FOR TENSILE STRENGTH, ELONGATION, TEARING, STICKING,STRESS-STRAIN, PEELING, SHEARING AND ETC. FUNCTIONS OF YIELD POINT, ELASTICITY MODULUS, YOUNG’S MODULUS, GRINDINGMODULUS, PUNCTURE AND OTHERS ARE ALSO AVAILABLE. CAPACITY: 1000KGSPEED: 1~500 MM/MIN (BOTH AUTOMATIC AND MANUAL ADJ....
The Spec Of Other Inspecting & Testing Machine : JIS L1095, CNS 1444/1479
1. This tester uses motor to drive and twist, to test the "Twisted level" and "Twisted Shrinkage" of "Single Fiber" or "Twisted Fiber".
2. It is suit for both "Single and Dual Fiber", "Twisted Fiber".
The Spec Of Other Inspecting & Testing Machine : The armature put on the tooling. Then, start to testing. The belt will press down to rotating the limanation. The probe will hold the armature to start the testing until completion. Operate the auto test according to the following procedure: Surge Test →Insulation Resistance Test →AC Puncture Test →DCΩ Test → ....
The Spec Of Other Inspecting & Testing Machine : 1. Mainly used to test pressure and resistance of shrinked linear tube.
2. Test pressure and resistance automatically, select reject automatically.
3. PLC automatic controlled, easy to operate, no operator is required. 1. Power supply: single phase 220V 50Hz 500W. 2. Air supply: 5 ~ 7 kg/cm2. 3. Efficiency: 5000 ....
The Spec Of Other Inspecting & Testing Machine : SY-T105 Oil seal gyration durable life testing machine:
1. Application: suitable for various oil seals gyration durable life testing.
2. Features:
(1) Gyrate at high speed or low speed with multi-speed auto control.
(2) Test the gyration of speed, direction, temperature, time, and preset on proface scope. Test f....
The Spec Of Other Inspecting & Testing Machine : 1. We designed tester all following IPC 2.3.17 (4.1) test method requirement.
2. The temperature tolerance is ± 1.5oC on a heating platen tested at 9 points.
3. The heating platen is precision machined and ground for high parallelism and flatness accuracy up to ± 0.02mm.
4. Upper, lower heating platen with PID dev....
The Spec Of Other Inspecting & Testing Machine : The machine is made to test the inside of steel tube/pipe pressure. It is using water to inspect whether the steel has been welded properly or not or can be figure out the steel is flawed or not and also what will be the maximum pressure that can sustain for the stainless steel tube/pipe to reach consumer requirement. ....
The Spec Of Other Inspecting & Testing Machine : 1. The vertical board is easy to move up and down.
2. For checking and correcting away from the plate. 1. Model: YC-TCS110. 2. Useful area: 900 x 1130 mm. 3. Ref．useful area (L x W): 1150 x 900 mm. 4. Tran．useful area (L x W): 1050 x 510 mm. 5. Ref light source: 36W x 1PC. 6. Tran light source: 36W x 2. 7. Dim....
The Spec Of Other Inspecting & Testing Machine : 1. L1, L2, two-step measurement.
2. Position presetting for L1, L2, insures fast operation.
3. Spring rate calculation.
4. Imperial or metric units switchable.
5. Length compensation built-in.
6. Printer included.
7. Load comparator available for tolerance check (optional). 1. Max load: 5 kg(500 n). 2. Min ....
The Spec Of Other Inspecting & Testing Machine : SMAC unique electric actuator configuration such as mini inline XYZ gauging systems gives you the capability of 100% parts inspection (eliminating bad parts) and correction through immediate feedback and adjustment i the manufacturing process. Volumes up to 100 cubic mm can be covered by a single system.
The actuat....
The Spec Of Other Inspecting & Testing Machine : * Application:
Suitable for the tensile test of oil seal lip.
* Features:
1.By the DIN3761PT9 Standard.
2.The tensile test machine assists the design and manufacture oil seals to increase the durable life of oil seals.
3.Equip with computer software to print and record test reporter.
The Spec Of Other Inspecting & Testing Machine : 1. Designed and manufactured in accordance with ASTM D623 & ISO 4666 standards.
2. By means of applying constant load and compression frequency to the test specimen, this instrument could help the user to understand the history of heat built-up and dynamic fatigue poeperties of rubber compounds. For example, whil....
The Spec Of Other Inspecting & Testing Machine : 1. Testing instrument.
2. NBS. 1. The physical property tests.2. Rubber abrasion. ....
The Spec Of Other Inspecting & Testing Machine : 1. EKT-TR100 TR-Low temperature retraction tester is designed in accordance with ASTM D1329, ISO 2921 with fully automatic and computerized controlling system.
2. The system can automatically controls the temperature and measure the samples deflection by using the high precision measuring device.
3. The system can ho....
The Spec Of Other Inspecting & Testing Machine : * Windows Operation Software System
Windows operation software system provides friendly operation environment also the following characteristics:
1. User can pre-set and save the testing specifications to save time of setting procedures before test.
2. User can choose and arrange the related coordinates such as re....
The Spec Of Other Inspecting & Testing Machine : •Advantage server motor, high quality warm gear gearbox, and precise roll bearing screw are adopted to ensure tensile tester machine the accurate control and results.
•Varity test and measure functions for tensile strength tester:
◦Tension: Our tensile strength testers evaluate the tensile strength of vul....
The Spec Of Other Inspecting & Testing Machine : •EKT-2102DFT Demattia Flexing Fatigue Tester is designed in accordance with ASTM D430 and D813 to test the repeat bending strain and flexing on different kinds of vulcanized rubber compound. After Test, the fatigue testing equipment can determine the difference of testing compund such as deformation, elongation, hard....
The Spec Of Other Inspecting & Testing Machine : •The EKT-2002 MG Mixing Grader ( Carbon Black Dispersion) is designed in accordance with ASTM D2663 & ISO1345 standards.
•Use precise optical magnifying lens and high quality digital video camera, incorporating with high-resolution image processing interface, so that you can get the most accurate surface imag....
The Spec Of Other Inspecting & Testing Machine : This machine is applicable to test 5pcs specimen at a time and be set up according to various testing travel and speed. It will test by 1 x 109 times and easy operate by touch screen.
The Spec Of Other Inspecting & Testing Machine : AATCC 127, JIS L1079/L1092/L1096/K6550, CNS 1479/10461/1481:
This tester test water penetration of waterproof material by a raising cup.
The Spec Of Other Inspecting & Testing Machine : CNS 2338:
This tester is to evaluate whether yarn ( thread ) lines is even or whether it have a cotton dust, nap, yarn spot faults, observe or compare according to the standard samle to evaluate the grade of yarn appearance, by the method to place all kinds of yarn together on the black board.
The Spec Of Other Inspecting & Testing Machine : Cometech QC-513B2 & QC-508B2 type; B2 controller serial is simplest type, controller and machine movement operate independently, provided with output signal of stop machine, collocate with different type flexible. Provided with data output function, can connect to computer and do analyses, statistics, save data wit....
The Spec Of Other Inspecting & Testing Machine : JIS L0801/L0849/L1006/L1084/K6328/P8136, CNS 1499/3843/8149/8432:
For colored fabric or leather and similar material. To test the dyeing-color firmness against abrasion, use standard white cotton(dry or wet) to number of times smoothly to the colored specimen, then take out white cotton cloth to compare with "sta....
The Spec Of Other Inspecting & Testing Machine : APPLICATIONS:
Copper foil, Aluminum foil, FPC, PET, Microfilm, P.V.C., Paper, Leather, Plastic sheet, Colorful ribbon, P.E, OPP ... etc.
RANGE OF APPLICATIONS:
Ideal for various industries as electronic, gament, stationery, leather, products, sport goods ... etc.
FEATURES:
1. Encolsed structure provides maximum....
The Spec Of Other Inspecting & Testing Machine : APPLICATIONS:
Copper foil, Aluminum foil, FPC, PET, Microfilm, P.V.C., Paper, Leather, Plastic sheet, Colorful ribbon, P.E, OPP ... etc.
RANGE OF APPLICATIONS:
Ideal for various industries as electronic, gament, stationery, leather, products, sport goods ... etc.
FEATURES:
1. Encolsed structure provides maximum....
The Spec Of Other Inspecting & Testing Machine : FEATURES:
1.The machine is designed for cutting two sheets of copper foil at a time for saving
half labor requirement while providing double productivity.
2.Equipped with air chuck and air shaft to save time by conventional manual
change of material. This also assures positive and fast material clamping.
3.....
The Spec Of Other Inspecting & Testing Machine : FEATURES:
1.The machine can cut two pp sheets simultaneusly for increasing productivity
and saving labors.
2.Micrometric adjustment device for upper and lower shaft permits aligning
between both shafts during operation.
3.The powder brake combined with air buffering mechanism provide accurate
control ....
