The Spec Of Tool Holders : *AMG tooling system is suitable for high speed and heavy cutting simultaneously.
*AMG tooling system is special designed for coolant type - JET THROUGH.
*High precision clamping because of the design of needle roller bearing.
*The spacer could make the flange & nut be tightened and provide exceptional rigidity.....
The Spec Of Tool Holders : MODEL NO. SYIC-04216-PN
The Spec Of Tool Holders : The Single Tool Holder is mounted directly to the CHR-68 turret. The single tool holder takes one standard 10mm square tool bit. The tool holder body is made of hardened steel. For:CT-1118CNC, CT-606CNC, CP-27CNC, CHR-68EVS, CHR-68e. ....
The Spec Of Tool Holders : 1. A foldable and greatest design for long T-bars.
2. Can be optionally attached onto any iron part of tool cabinets for vehicle and household maintenance and repair, machineries, equipment, etc.
3. Accommodate more than 5 pieces T-Bars.
4. Attach aside the tool cabinet and spare apace.
5. Bear up to 3kgs. ....
The Spec Of Tool Holders : 1. Sotek Technology Co., Ltd., a company endeavors to be perfect on quality, service, competition, and responsibility, spinning off in 2004 from Soartek Co., Ltd. (established in 1989), now managed by Mr. Sunny Liu.
2. Mr. Liu believes quality is the only and the best way to compete and survive. This goal has stimulat....
The Spec Of Tool Holders : Our VDI holders are designed and manufactured in accordance with din69880. They are made of high grade alloy steel with precision machining, heat-treatment and grinding. 1. CAT40-EMC32-100.2. CAT50-EMC32-100. ....
The Spec Of Tool Holders : Magnetic insert bit holder w/"C" ring. 1. Material: stainless steel.
2. Code: BHS11054.
(1) Sleeve diameter: ψ11mm.
(2) Overall length: 54mm.
(3) Hex. size: 1/4".
3. Code: BHS11075.
(1) Sleeve diameter: ψ11mm.
(2) Overall length: 75mm.
(3) Hex. size: 1/4". ....
The Spec Of Tool Holders : Metal kitchen tool holder, chrome finish, 1.2 mm thick. 10.0 DIA x 15.0 CM H. ....
The Spec Of Tool Holders : 1. Super strong magnet holds and organizes wrenches sockets and fasteners.
2. Tools and fasteners can secured when taken to the job site.
3. Low profile holder fits in tool box, tool storage drawer or can be hung on any metal surface.
4. With firm grip can take off holder easily from metal surface. 1. Size: 305m....
The Spec Of Tool Holders : Compression and tension compensation at 0.5mm to make an accurate thread is maintained
Internal buffer of compression compensation reduce the pressure of torque for taps by 1/3
Tension compensation reduce the toque that increases the quantity and accuracy of tapped hole
Special design make good tapping accuracy and ....
The Spec Of Tool Holders : Tension: 6.5mm, compression: 5mm.
Suitable for traditional CNC machines without rigid tapping program.
Using with rigid tap collets increases the clamping force, prevents taps from falling off and improves the machining efficiency. Tension: 6.5mm, compression: 5mm.Suitable for traditional CNC machines without rig....
The Spec Of Tool Holders : Inch size.
Tolerance of d1 the connection part with cutter: h6, which is good for less chatter and longer cutter life.
Standard screw attached is w/o coolant hole.
To use with face mill cutters with coolant holes, the standard screw has to be changed into the screw with coolant flute, which is available to order sep....
The Spec Of Tool Holders : *Customize according to your request.
*When ordering, please specify the D & L and the draw bolt with inch size or metric size. For the product specifications, please refer to our official website. ....
The Spec Of Tool Holders : *The extension pull stud must be ordered separately. For the product specifications, please refer to our official website. ....
The Spec Of Tool Holders : Product Name: Pull Stud Accessories - MAS 403-BT For the product specifications, please refer to our official website. ....
The Spec Of Tool Holders : *For straight shank end mill.
*The holder's shank is with the taper design to make it will the better rigidityEnd mill holder comes equipped with set screws.
*End mill is held by two set screws.
*End mill holder comes equipped with set screws. For the product specifications, please refer to our official webs....
The Spec Of Tool Holders : *For straight shank end mill.
*End mill is held by two set screws.
*End mill holder comes equipped with set screws. For the product specifications, please refer to our official website. ....
The Spec Of Tool Holders : *For straight shank end mill.
*End mill is held by two set screws.
*End mill holder comes equipped with set screws.
*Balancing: 30,000 r.p.m G2.5 For the product specifications, please refer to our official website. ....
The Spec Of Tool Holders : *The tool holder for morse taper shank with internal tang. For the product specifications, please refer to our official website. ....
The Spec Of Tool Holders : *Keyless drill mount must be ordered separately. For the product specifications, please refer to our official website. ....
The Spec Of Tool Holders : *When ordering, please specify the draw bolt with inch size or metric size.
*C-type wrench is attached for each ASC milling chuck. For the product specifications, please refer to our official website. ....
The Spec Of Tool Holders : •The spindle chuck is designed to be #30 taper type, which can be used to match multiple and suitable adapters according to different processing requirements.
•Gear ratio 1:1, the spindle doesn’t need to turn counterclockwise.
•The fixed block is available for coolant system.
•The design of angle scale ena....
The Spec Of Tool Holders : •The pre-balance can reach G6.3 5,000 rpm, without an inspection report.
•The balancing grade and revolution can be done according to customer's request but the additional charge is needed.
The Spec Of Tool Holders : Steel: SUJ2.
•HRC 46°.
•Taper 8°.
•The design is to take use of the difference of flutes and O-rings to achieve center coolant.
•Useful for coolant cutting tools.
•Water pressure up to 21 kgf/cm2.
•No flexibility (No flexible chucking range. It depends on the biggest chucking range).
•Non-standa....
The Spec Of Tool Holders : Feature:
•The design of coolant groove is good for cooling and metal chips removal, extending tool life.
The Spec Of Tool Holders : •High rigidity.
•Best runout (T.I.R): 5μ.
•Slim design.
•Easy operation.
The Spec Of Tool Holders : •Runout is within 5μ(4D length).
•SKS Collet taper: 4°, increasing holding power, concentricity and rigidity.
•Every tool holder reaches revolution of G2.5 25,000 rpm, with an inspection report.
•The balancing grade and revolution can be done according to customer's request but the additional charge is....
The Spec Of Tool Holders : •The pre-balance can reach G6.3 10,000 rpm, without an inspection report.
•The balancing grade and revolution can be done according to customer's request but the additional charge is needed.
The Spec Of Tool Holders : 1. High rigidity.
2. T.I.R.: within 5 μ.
3. Slim design.
4. Easy operation.
5. Every tool holder reaches the standard of G2.5 25,000 rpm, with an inspection report.
6. The balancing grade and revolution can be done according to customer's request but the additional charge is needed.
7. For tool shank with h6....
The Spec Of Tool Holders : 1. High rigidity.
2. T.I.R.: within 5 μ.
3. Slim design.
4. Easy operation.
5. Every tool holder reaches the standard of G2.5 25,000 rpm, with an inspection report.
6. The balancing grade and revolution can be done according to customer's request but the additional charge is needed.
7. For tool shank with h6....
