The Spec Of Vertical Turret Milling Machine : Features:
* Dynamically Balanced Motor and Ground Pulleys.
* Chrome-Plated and Bearing Supported Motor Shaft Provides An Extremely Smooth, Low Vibration Quiet Drive.
* High Precision Spindles Use Class 7 Angular Contact Bearings.
* Spindle Runout Guar Anteed to be Within 0.00015".
* The Dovetail and Square S....
The Spec Of Vertical Turret Milling Machine : 1. Integrated automatic lubricating system.
2. Cooling system.
3. Each travel axis is equipped with limit switches to ensure safety.
4. Slide surface lies been treated with hardening, the rigid construction to ensure machine an stable performance.
5. The x, y axis slideways coated with low-friction property materia....
The Spec Of Vertical Turret Milling Machine : Step Speed Head
•42" x 9" TABLE
•3HP MOTOR
•Meehanite castings.
•Hardened & ground cross slide way and table.
•Chrome hardened, ground quill.
•High precision 7207 CP4 spindle bearings.
•Turcite-B coated on the cross and longitudinal way.
•Dovetail way X, Y, Z axis.
The Spec Of Vertical Turret Milling Machine : MW0800-035 vertical turret milling machine have 4 subtype: 2S; 2VS; 4S; 4VS. They are different in motor type (V means variable speed), and table size. 1. Table: (1) Working surface: 2S & 2VS: 1067x230mm; 4S & 4VS: 1270x254mm. (2) T slot (W x No. x pitch): 16x3x63mm. 2. Travel: (1) XxYxZ-manual: 2S & 2V....
The Spec Of Vertical Turret Milling Machine : *Heavy duty milling machine CK-626I
*Variable speed frequency drive allows speeds from 200 to 2250RPM
*Fold up safety handles
*Head tilts to 90o both ways. 360o rotation on horizontal surface.
*Lower noise and convenient operation
*Table locks for high rigidity
*Cast iron construction through out machine
*Forwar....
The Spec Of Vertical Turret Milling Machine : 1. Precision ball screw: Pre-loaded with double nuts C5 class
precision ballscrew is installed on X & Y axes ensuring the transmission quality-small backlash & fine positioning.
2. Quality inspection equipment: German-made 3D coordinate measuring machine is employed in our machine shop.
All precision compo....
The Spec Of Vertical Turret Milling Machine : HEAVY DUTY MODL
•Step Speed Head
•50" x 10" TABLE
•5HP MOTOR
•Powered table elevation, with saftey switch.
•Electric control box.
•Halogen work lamp.
•Auto-lubrication.
•Meehanite castings.
•Hardened & ground cross slide way and table.
•Chrome hardened, ground quill....
The Spec Of Vertical Turret Milling Machine : Step Speed Head
•50" x 10" TABLE
•3HP MOTOR
•Meehanite castings.
•Hardened & ground cross slide way and table.
•Chrome hardened, ground quill.
•High precision 7207 CP4 spindle bearings.
•Turcite-B coated on the cross and longitudinal way.
•Dovetail way X, Y, Z axis.
The Spec Of Vertical Turret Milling Machine : Step Speed Head
•50" x 10" TABLE
•3HP MOTOR
•Meehanite castings.
•Hardened & ground cross slide way and table.
•Chrome hardened, ground quill.
•High precision 7207 CP4 spindle bearings.
•Turcite-B coated on the cross and longitudinal way.
•Dovetail way X, Y, Z axis.
The Spec Of Vertical Turret Milling Machine : Step Speed Head
•42" x 9" TABLE
•3HP MOTOR
•Meehanite castings.
•Hardened & ground cross slide way and table.
•Chrome hardened, ground quill.
•High precision 7207 CP4 spindle bearings.
•Turcite-B coated on the cross and longitudinal way.
•Dovetail way X, Y, Z axis.
The Spec Of Vertical Turret Milling Machine : The FM-4VKH model high quality, low cost milling machines have been built by CHEVALIER to meet the demanding needs of machine toolindustry. The slideways of table, knee and column are hardenedand ground for accurate, smooth and wear resistant slidewaysystems. The upper and lower surfaces of the saddle arelaminated with....
The Spec Of Vertical Turret Milling Machine : *Adjustable table stops for accurate stops for cuts and repeatability
*Head titls to 90. Both ways 360. Roation on horizontal surface
*Scrapping technology X, Y, Z
*Ps. The scrap technology is considered as the fundamental of the accuracy of precision machine tools
*Hardened & ground column and knee slideways
....
The Spec Of Vertical Turret Milling Machine : 1. Integrated automatic lubricating system.
2. Cooling system.
3. Each travel axis is equipped with limit switches to ensure safety.
4. Slide surface lies been treated with hardening, the rigid construction to ensure machine an stable performance.
5. The x, y axis slideways coated with low-friction property materia....
The Spec Of Vertical Turret Milling Machine : * The machine column is manufactured from high quality cast iron
FC-30, tempered for long term accuracy. FC-30 cast iron table is tempered, hardened and precision ground.
* The spindle is precision machined from SCM-21 alloy steel. tempered and carbon treated, ensuring maximum stability for heavy duty cutting.
* X a....
The Spec Of Vertical Turret Milling Machine : * The machine column is manufactured from high quality cast iron
FC-30, tempered for long term accuracy. FC-30 cast iron table is tempered, hardened and precision ground.
* The spindle is precision machined from SCM-21 alloy steel. tempered and carbon treated, ensuring maximum stability for heavy duty cutting.
* X a....
The Spec Of Vertical Turret Milling Machine : * The machine column is manufactured from high quality cast iron
FC-30, tempered for long term accuracy. FC-30 cast iron table is tempered, hardened and precision ground.
* The spindle is precision machined from SCM-21 alloy steel. tempered and carbon treated, ensuring maximum stability for heavy duty cutting.
* X a....
The Spec Of Vertical Turret Milling Machine : 1. X,Y,Z travel: 890x407x407 mm.
2. Table size: 254x1270 mm.
3. Motor: 3HP/5HP.
4. Spindle: ISO40. 1. Ram travel: 458mm. 2. Quill dia.: 100mm. 3. Quill feed: 3 feed rates (0.04, 0.08, 0.15mm). 4. Quill travel: 127mm. 5. Table size: 254x1270 mm. 6. Spindle speed: 60-3600/80-3800 RPM. 7. Head tilt: 45° forward....
The Spec Of Vertical Turret Milling Machine : 1. X,Y,Z travel: 820x380x360 mm.
2. Table size: 305x1270 mm.
3. Motor: 3HP/5HP.
4. Spindle: ISO40. 1. X,Y,Z travel: 820x380x360 mm. 2. Ram travel: 458mm. 3. Quill dia.: 100mm. 4. Quill feed: 3 feed rates (0.04, 0.08, 0.15mm). 5. Quill travel: 127mm. 6. Table size: 305x1270 mm. 7. Spindle speed: 60-3600/80-3800 R....
