The Spec Of Welding and Cutting Machine : Description:
1. Make up for traditional ARC welding, cold welding in shortage of surface fine welding, avoid the distortion and depressed in surrounding site. Can seal on narrow part, and patch weld on deep-recessed part, without damage surrounding. No burning surrounding when fine patching weld in corner. Special ga....
The Spec Of Welding and Cutting Machine : 1. Product name: vertical high speed bandsaw blade welders.
2. Band saw blade welder, free standing. 1. Capacity: 2.0kva.2. Band width: 3-13mm. ....
The Spec Of Welding and Cutting Machine : Features:
1. Air control cylinder construction and solenoid valve.
2. High conductivity secondary re-circuits.
3. Sold frame structure.
4. Both interior and exterior of machine are treated with coating.
5. An optional press adjuster is provided for upward and downward adjustment.
6. All series with microcomputer ....
The Spec Of Welding and Cutting Machine : 1. Utilize rapid cutting to joint & welding coil.
2. Construction patented. Hydraulic dual blades cutting, flat and straight for easy welding.
3. Manual pneumatic or hydraulic simple copper mold clamping, automatic centering, accurate and fast operation.
4. Adopt precise motor control, welding gun movement is....
The Spec Of Welding and Cutting Machine : 1. Model No.: QS-600, QS-800, QS-1000.
2. Bag W./max (mm): 600, 800, 1000.
3. Bag L./max (mm): 600, 600, 800. 1. Main motor: 2 HP, 2 HP, 3 HP.2. Output/per min: 30-120, 30-120, 30-120.3. Sub motor: 1/2 HP, 1/2 HP, 1/2 HP. ....
The Spec Of Welding and Cutting Machine : 1. Cylinder and cylinder seat are made of special ball bearing with low coefficient of friction, more fixer than ordinary bushings, quick response, and low air consumption. The cylinder outlet can be adjusted at two steps.
2. Use of IC control regulating circuit and IC digital control circuit which are very stable in....
The Spec Of Welding and Cutting Machine : For welding, spot welding, inserting, staking, forming, degating application. Multi-functions, cooperate with the peripheral equipment use of automation. Importanting Japense "NTK" transducer for top energy. 1. Output: 1500W.2. Frequency: 20KHZ.3. Line source: 220V/1Phase.4. Air cylinder: dia.63 mm x 75mm....
The Spec Of Welding and Cutting Machine : •Complex 7-axis robot, and take advantage of the technology to synchronize the movement to achieve a simple manual operation
•Increasing the degree of freedom manipulator position, minimizing the interference reducing peripheral cable
•Even in the case of complex workpieces and fixtures, you can turn the 7-axis....
The Spec Of Welding and Cutting Machine : Application: for punching of various shapes of holes (e.g. round, oblong, square & etc.) on papers, plastic or leather for binding with spiral, comb, computer or loose leaf binders. Tooling is available on request. 1. Model: HC-5TRJ.2. Maximum workpiece size: 360(L) x 550(W) mm.3. Height from floor to table: 75....
The Spec Of Welding and Cutting Machine : 1. This machine is specially designed to weld the straight seam of the cylinder, hot-water heater, drum, and square container. Back-up rod adopts water cooling method. Keyboard style pressure hold-down. Back-up rod can be changed as per requirement. Welded seam is flat and straight. Good weld penetration and weld quali....
The Spec Of Welding and Cutting Machine : 1. Hangingspot welding gun C model.
2. Optimal electrical efficiency for lower operating costs.
3. Compact construction to accommodate space-restrictive machine designs.
4. High quality simple operation for easy of control. 1. Portability, operate agilely. 2. If you want to know more details, please contact us ....
The Spec Of Welding and Cutting Machine : 1. Output adjusts: 30-100% SCR stepless adjustment.
2. Control device: Made in Japan controller.
3. Cooling water: 36 L./minute. 1. Power source: 1Ø AC 380/440V 50/60Hz. 2. Control power: 1Ø AC 220V 50/60Hz. 3. Rate capacity: 480 Kva. 4. Max. s. Circuit current: 65000 amp. 5. Pressure cylinder: &Osl....
The Spec Of Welding and Cutting Machine : 1. It is suitable to weld thin metal.
2. It uses electrode less attrite than TIG.
3. The electric arc is focus and permeability is strong.
4. The weld road did not be affected by hot temperature. The around weld metal did not be broken and suitable high speed welding. PLW-02Y can be made range of welding c....
The Spec Of Welding and Cutting Machine : 1. Excellent arc start even in small current (5A) by IC thyristor control.
2. Soft and stable arc even in high speed welding
3. DC pulse TIG welding realizes uniformly penetration and stable welding result.
4. Stable output even TIG torch cable is extended. 1. Applicable thickness: 0.5 - 6mm.2. Output current....
The Spec Of Welding and Cutting Machine : •Advance Low Spatter Performance
•Advance Thin Sheet Welding Performance
•Advance Arc Start Performance
The Spec Of Welding and Cutting Machine : 1. Utilize rapid cutting to joint & welding coil.
2. Construction patented. Hydraulic dual blades cutting, flat and straight for easy welding.
3. Manual pneumatic or hydraulic simple copper mold clamping, automatic centering, accurate and fast operation.
4. Adopt precise motor control, welding gun movement is....
The Spec Of Welding and Cutting Machine : 1. This cylinder hydraulic circle forming machine is capable of roller forming the sheet metal into cylinder work-piece. The hydraulic roller cylinder causes the forming quality of the work-piece even and stable. Pneumatic fastening makes the operation easy.
2. Dual axle metal plate circle forming machines ( automatio....
The Spec Of Welding and Cutting Machine : 1. Function / equipment summary:
(1) Welding turntable: driving by DC motor, speed is adjustable.
(2) Head seat Jig: it's a simple jig to press tight the top head quickly and to orientate.
(3) Tailstock center: it works with cylinder to cause uniform pressure and easy operation. It can be adjusted frontward o....
The Spec Of Welding and Cutting Machine : 1. Summary: this machine is specially designed to weld the straight seam of the cylinder, hot-water heater, drum, and square container.
Back-up rod adopts water cooling method. Keyboard style pressure hold-down. Back-up rod can be changed as per requirement. Welded seam is flat and straight. Good weld penetration and....
The Spec Of Welding and Cutting Machine : 1. Through the design of the center bore on the shaft of the turn table in this series, the installation of the air hose or pneumatic material discharging device is optional. This has the merits of high rigid and fast heat dissipation.
2. To fix the angle of the turn table by adjustable hand lever mounted on base wall....
The Spec Of Welding and Cutting Machine : Summary:
This machine is specially designed to weld the straight seam of the cylinder, hot-water heater, drum, and square container. Back-up rod adopts water cooling method. Keyboard style pressure hold-down. Back-up rod can be changed as per requirement. Welded seam is flat and straight. Good weld penetration and wel....
The Spec Of Welding and Cutting Machine : Introduction:
1. Uncoiler: coil infeed plates move to uncoil through plate track, and then they will be raised to position by oil hydraulic. Until two holding roller sets enter to fixed coil section, then they will be put into leveling section by motor power. After all actions are completed, then loosen clutch of the ....
The Spec Of Welding and Cutting Machine : Application: Used in such fields as furniture, freight, shipbuilding, architecture, automobile fixing, bicycle and so on. Rated Output Current:30~250A RatedDuty Cycle:50%(10Min.)Dimension: 360 x 495 x 550MMWeight: 75KG ....
The Spec Of Welding and Cutting Machine : Charge first & then discharge during welding process, the energy stored in the capacitor and releases on the welding transformer instantly to generate higher current. Low power source is required to reduce cost for the user. Unaffected by power voltage drop, it's suitable for many kinds of materials such as alu....
The Spec Of Welding and Cutting Machine : Dual-head characteristic in this machine which can not only reduce the pressure caused by power supply but also create smooth welding surface to make grinding is not required.
Touchable screen & microcomputer control system for auto-production.
Finished workpiece's surface is clean & polished
Built-in vo....
The Spec Of Welding and Cutting Machine : 1. Application for woodworking.
2. We can provide depend on the specification size, size, color that customer specify, draw a design the manufacture again. It’s sampo’s specification:1. Motor: 3HP(or5HP) single phase.2. Blade speed: 3700 feet per minute.3. Blade length: 177".4. Blade Capacity: fro....
The Spec Of Welding and Cutting Machine : 1. Property:
(1) Utilize rapid cutting to joint & welding coil.
(2) Construction patented. hydraulic dual blades cutting, flat and straight for easy welding.
(3) Manual pneumatic or hydraulic simple copper mold clamping, automatic centering, accurate and fast operation.
(4) Adopt precise motor control, ....
The Spec Of Welding and Cutting Machine : 1. Through the design of the center bore on the shaft of the turn table in this series, the installation of the air hose or pneumatic material discharging device is optional. This has the merits of high rigid and fast heat dissipation.
2. To fix the angle of the turn table by adjustable hand lever mounted on base wa....
The Spec Of Welding and Cutting Machine : 1. Through the design of the center bore on the shaft of the turn table in this series, the installation of the air hose or pneumatic material discharging device is optional. This has the merits of high rigid and fast heat dissipation.
2. To fix the angle of the turn table by adjustable hand lever mounted on base wa....
The Spec Of Welding and Cutting Machine : 1. Use of IC electronic control, synchronous circuit, and the electric current is controlled by S.C.R. solid-state switch stageless adjustment.
2. Upper arm electrode brass can be adjusted 360o to weld accurately in horizontal and vertical requirement. Lower arm chrome electrode brass can be changed for application o....
