Automatic Door Hardware

China Automatic Door Hardware Manufacturers listings in full models and specifications. Automatic door hardware made in China by leading Chinese suppliers. Search for complete listings of Chinese automatic door hardware suppliers and related trade leads in B2BChinaSources.com

Top Products :

Automatic Door Operators
TH-2600S is suitable for use in the models listed below: 1....

King Ta Han Technology Co., Ltd.

Function Switches
Opentional device of automatic door operator.

King Ta Han Technology Co., Ltd.

Ø12 Bearings For Tubular Motors
1. Ø12 bearing was designed for tubular motor installed at ...

Tong Eann Shutters Co., Ltd.

Ø12mm Shaft Studs
1. Ø12mm shaft stud was designed for install at the end of ...

Tong Eann Shutters Co., Ltd.

Select to : Select All | Clear All
View by - Products (25) Companies
Automatic Door Hardware image
Select

1. Micro Computer Automatic Doors

The Spec Of Automatic Door Hardware : Full micro-computer controls unkt in head of automatic door. Accurate actions when run command. The newest design on micro-computer can free control speed adjustable and set up. It is can decrease working and maintenance time in large scale when install automatic door. 1. Easy to install. 2. High safety: when contact....

Automatic Door Hardware image
Select

2. Wireless Switches (Sensors)

The Spec Of Automatic Door Hardware : By touching a push plate lightly, the door open and closes. The switch detects only passenger who intends to pass through the automatic door without any mis-detection of any other street walkers in a narrow space between a door and a road.
1. Inspection method: RF method. 2. Receiving distance: 20m. 3. Receiver'....

Automatic Door Hardware image
Select

3. Steel Cable Clutch Switches

The Spec Of Automatic Door Hardware : 1. Steel cable clutch switch was designed for security motor. 2. Suitable for security motor and allowing for both manual and electric operation by the clutch switch 600 010 010.
Steel cable clutch switch: 1. Length: 3.6M ~ 4.8M. 2. Color: gray. 3. Weight: 0.25kg ~ 0.35. 4. Material: steel wire. ....

Automatic Door Hardware image
Select

4. Spring Boxes

The Spec Of Automatic Door Hardware : Central motor 200RS60 is equipped with even spring boxes to keep balance, maximum lifting capacity 150kgs (50kgs without spring boxes).
1. Spring box (for 3M height). 2. Max load: 20kg, 25kg, 30kg, 35kg, 40kg. 3. It can reduce weight of roller shutters lifting by manual. ....

Automatic Door Hardware image
Select

5. Spring Wires

The Spec Of Automatic Door Hardware : 1. It was designed for shutters and manual door. 2. It can be operate with manual slats and other shutter system. 3. Spring wire can make you lift shutters easier.
1. Wire diameter: 4.0mm ~ 7.0mm. 2. Length: 1 ~ 3.5ft. 3. Weight: 1.7Kg ~ 5Kg. 4. Material: steel. 5. Suitable for roller shutter or door. ....

Automatic Door Hardware image
Select

6. Ø35/Ø45 Motor Pin Studs

The Spec Of Automatic Door Hardware : 1. Ø35/Ø45 motor pin stud was designed screwed on the head of 35mm and 45mm tubular motor. 2. It was suitable for blind or projection screen operation system. 3. It can be screwed on wall bracket or fixed on the wall directly.
Specification of Ø35/Ø45 motor pin stud: 1. 5 scred holes for fixing on the head....

Automatic Door Hardware image
Select

7. Ø44 Octagonal Aluminum Tubes

The Spec Of Automatic Door Hardware : 1. Ø44 octagonal aluminum tube was designed for TESC 35mm tubular motor. 2. It was operate with octagonal drive adapter. 3. Tubular motor have to insert into aluminum tube, then it work. 4. Length of tube will depends on width of your window. 5. Measuring dimension of your windows before you start to ins....

Automatic Door Hardware image
Select

8. Ø35 Motor Pin Studs

The Spec Of Automatic Door Hardware : 1. Ø35 motor pin stud was specialized for 35mm tubular motor use only. 2. It was usually operate with bracket pin stud and used for light shutter operation system. 3. Good motor pin system can make stable operation performance.
Speicfication: 1. 10mms quare pin. 2. 5 screw holes for motor head. 3. Mate....

Automatic Door Hardware image
Select

9. Mounting Studs

The Spec Of Automatic Door Hardware : 1. Mounting stud was designed for tubular motor at the head of tube. 2. It was suitable for shutters and heavy operation system and it have to opoerate with motor square bolt pin stud. 3. It can offer good and stable holding performance for operating.
Specification of Ø28 bearing bracket: 1. Thickness: 2.5. ....

Automatic Door Hardware image
Select

10. Ø12mm Shaft Studs

The Spec Of Automatic Door Hardware : 1. Ø12mm shaft stud was designed for install at the end of tube. 2. It was suitable for blind or projection screen operation system for reduce gap between the wall. 3. It can be screwed on wall bracket or fixed on the wall directly.
Specification of Ø12mm shaft stud: 1. 2 screw holes for fixing on the ....

Automatic Door Hardware image
Select

11. Ø12 Bearings For Tubular Motors

The Spec Of Automatic Door Hardware : 1. Ø12 bearing was designed for tubular motor installed at the end of tube. 2. It was suitable for shutter and heavy operation system. 3. It have to opoerate with Ø28 bearing bracket and it can offer good lubricity performance for operating.
Specification of Ø12 bearing: 1. Diameter: Ø28 mm. 2.....

Automatic Door Hardware image
Select

12. Ø65 Octagonal Aluminum Tubes

The Spec Of Automatic Door Hardware : 1. Ø65 octagonal aluminum tube was designed for TESC 45mm tubular motor. 2. It was operate with octagonal drive adapter. 3. Tubular motor have to insert into aluminum tube, then it work. 4. Length of tube will depends on width of your window. 5. Measuring dimension of your windows before you start to install tubul....

Automatic Door Hardware image
Select

13. Ø45 Motor Pin Studs

The Spec Of Automatic Door Hardware : 1. Ø45 motor pin stud was designed screwed on the head of 45mm tubular motor. 2. It was suitable for shutter operation system. 3. It was usually applied for heavy shutter system and it can make power of motor performance smoothly.
Specification of Ø45motor pin stud: 1. 2 screw holes for fixing on the h....

Automatic Door Hardware image
Select

14. Warned Sounds

The Spec Of Automatic Door Hardware : 1. Open ional device of automatic door operator. 2. While people pass in/out, it will be sending out "DING DONG" sound.
1. Detection method: infrared rays. 2. Power: 80V~250V. 3. Power consumption: 4W (max.). 4. Environment temperature : -20℃ to +50℃. 5. Volume: 0.4 kg. 6. Weight: L:19.4, W: 4,....

Automatic Door Hardware image
Select

15. Lavatory Systems For Disabled People

The Spec Of Automatic Door Hardware : The system has been developed mainly for easy use by disabled people as riding on the wheelchair. We have studied from various viewpoints easy use such as with smooth access and operation by pushing the button switch.
1. Power: 80V~250V. 2. Power consumption: 8 W (max.). 3. Adjust for open push time: second 1~9 ....

Automatic Door Hardware image
Select

16. Electric Locks For Automatic Doors

The Spec Of Automatic Door Hardware : 1. Will not increase the temperature while it running and working. 2. Tough and durable. There is no problem for the lock to be lodged.
1. Door monitoring output (reel sensor NO/NC). 2. Request to open input, auto re-lock if no action within 5 sec. 3. Power reverse protected. 4. Delay time 0, 3, 6, 9 sec. 5. V....

Automatic Door Hardware image
Select

17. Function Switches

The Spec Of Automatic Door Hardware : Opentional device of automatic door operator.
1. TH-135 is suitable for any Automatic Door Operator. 2. There are six press functions. (1) Door open. (2) In one-way. (3) Auto. (4) Out one-way. (5) Door close. (6) Full/half. 3. Press the 1-6 button, you can choose to open or close door. 4. Volume: 68×48×3....

Automatic Door Hardware image
Select

18. Wireless Switches (Sensor)

The Spec Of Automatic Door Hardware : 1. By touching a push plate lightly, the door open and closes. 2. The switch detects only passenger who intends to pass through the automatic door without any mis-detection of any other street walkers in a narrow space between a door and a road.
1. Inspection method: RF method. 2. Receiving distance: 20m. 3. Rec....

Automatic Door Hardware image
Select

19. Automatic Door Operators

The Spec Of Automatic Door Hardware : TH-2600S is suitable for use in the models listed below: 1. Single-winged. 2. Bi-parting. 3. Telescopic door. 4. Curved door. 5. Round door.
1. Door weight: less 150kg-1door(single-winged), less 130kg-2doors(bi-parting) 2. Opening /closing speed: 600mm/sec.(single-winged), 650mm/sec. (bi-parting) (variable).....

Automatic Door Hardware image
Select

20. Brushless DC Motors

The Spec Of Automatic Door Hardware : Brushless dc motor (th-2600) is suitable for use in the models of automatic door listed below: 1. Single-winged. 2. Bi-parting. 3. Telescopic door. 4. Curved door. 5. Round door.
1. Load weight: less150kg-1door (single-winged), less130kg-2doors (bi-parting). 2. Working temperature: -20~+50 (c degree). 3. Dr....

Automatic Door Hardware image
Select

21. Micro-Computer Controllers For Doors

The Spec Of Automatic Door Hardware : Micro-controller (Th-2600) is suitable for use in the models listed below: 1. Single-winged. 2. Bi-parting. 3. Telescopic door. 4. Curved door. 5. Round door.
1. Power supply: AC80V~250V. 2. Volume: l: 50.8, w: 4.5, h: 5 (cm). 3. Working temperature: -20~+50 (c degree). 4. Regulate function: (1) Full/hal....

Automatic Door Hardware image
Select

22. Automatic Door Operators

The Spec Of Automatic Door Hardware : AD-300 is suitable for use in the models listed below: 1. Single-winged. 2. Bi-parting. 3. Telescopic door. 4. Curved door. 5. Round door. 6. Air-tight door.
1. Door weight: less 160kg-1door (single-winged), less 150kg-2doors(bi-parting). 2. Opening /closing speed: 600mm/sec.(single-winged), 550mm/sec. (bi-....

Automatic Door Hardware image
Select

23. Worm Gear Motors

The Spec Of Automatic Door Hardware : Worm motor (ad-300) is suitable for use in the models of automatic door listed below: 1. Single-winged. 2. Bi-parting. 3. Telescopic door. 4. Curved door. 5. Round door. 6. Air-tight door.
1. Load weight: less 160kg-1door(single-winged), less 150kg-2doors(bi-parting). 2. Working temperature: -20~+50 (C degr....

Automatic Door Hardware image
Select

24. Micro-Computer Controllers For Doors

The Spec Of Automatic Door Hardware : Micro-controller (AD-300) is suitable for use in the models listed below: 1. Single-winged. 2. Bi-parting. 3. Telescopic door. 4. Curved door. 5. Round door. 6. Air-tight door.
1. Power supply: AC80V~250V. 2. Volume: l: 50.8, w: 4.5, h: 5 (cm). 3. Working temperature: -20~+50 (c degree). 4. Regulate funct....

Automatic Door Hardware image
Select

25. Remote Controls For Automatic Doors

The Spec Of Automatic Door Hardware : 1. Transmitter is 20-bit digital code that is much safety and use fix-frequency component to transmit signal. The frequency of transmitter won't be affected by battery consumption and outside environment. 2. Wireless receiver use super-heterodyne from U.S.A. The receiver is stably, anti-interference, no extra-wave. 3....

Select to : Select All | Clear All
Page 1

Other Categories : 

More information maybe available with the following search options.

Google Web B2BChinaSources GlobalSources Alibaba
If you need any further assistance or want to report invalid information, here is the Help Desk. Automatic Door Hardware

Listing of China Automatic Door Hardware Manufacturers & suppliers. All qualify products of automatic door hardware made in China & Taiwan, connecting reliable Chinese manufacturers, suppliers, exporters, factories & contract manufacturing companies with global buyers.

China manufacturers listings of automatic door hardware in B2BChinaSources.com for global buyers. High quality and quality assurance. Automatic door hardware supplied by Chinese manufacturers with the most competitive prices and superb quality. Listings will lead you right to crucial data such as company brief introduction business type, main products, target market, contact information, certifications and more.

Sign In My B2B

Supplier Services

Advertisement

Join for Free

Automatic Door Hardware made by creditable manufacturers and you are welcome to Add Your Products Here to attract more potential clients if you happen to be doing business in the same field.