The Spec Of Door Hardware : 1. Features:
(1) 10 positioning stages.
(2) Circulating operation procedure, easy to operate. (Open stage by stage→fully opened→close).
(3) Close only after fully opened.
2. Apply: for regulating the door / window /lid opening position.
The Spec Of Door Hardware : 1. Material: yellow zinc.
2. Size: 59 x 34.5mm.
3. I series.
4. Apply to various types of locks.
The Spec Of Door Hardware : 1. Economy screen door closer.
2. Most commonly used in west coast of U.S.A.
The Spec Of Door Hardware : 1. Material: ABS.
2. Blue LED lighted sensor area for easy identification.
3. Power: DC 10.5V~18V.
The Spec Of Door Hardware : Hinge (door, cabinet): each product which is produced by MING RONG HARDWARE CO.,LTD mean quality, reliable and competitive. MING RONG HARDWARE CO.,LTD has been running in this filed for over 30 years, we are glad to establish bussiness relationship / develop the new relative product with foreign buyers and offer the sa....
The Spec Of Door Hardware : 1. Stainless steel anti-drilling lock cover spray with celluloid lacquer to prevent the surface corrosion.
2. Anti-theft cylinder with two cross lines of 5 and 4 special design pins.
3. 3 pcs of Tutenag keys with chrome plating & 1 pc key card.
4. 1 set/inner white box, 80 inner box/ctn.
The Spec Of Door Hardware : Full micro-computer controls unkt in head of automatic door. Accurate actions when run command. The newest design on micro-computer can free control speed adjustable and set up. It is can decrease working and maintenance time in large scale when install automatic door.
1. Easy to install.
2. High safety: when contact....
The Spec Of Door Hardware : China smart magnet, manufacturer, OEM, seller, supplier, vendor(vender), is a manufacturer & exporter of magnetic door catcher with clamp magnets are used for all types of doors, magnetic door catcher is easy to fix the doors.
The Spec Of Door Hardware : 1. Such handle is suitable for office pedestal, closet door, cabinet drawer, etc.
2. Material: stainless steel, aluminum alloy.
The Spec Of Door Hardware : By touching a push plate lightly, the door open and closes.
The switch detects only passenger who intends to pass through the automatic door without any mis-detection of any other street walkers in a narrow space between a door and a road.
The Spec Of Door Hardware : 1. ABK-800A-M rectangular.
2. ABK-800B-M square.
The Spec Of Door Hardware : 1. Radio remote control (Individual Control) for rolling door motor use only.
2. Leading technology and model design with anti-code function and
applied for remote control integrated.
The Spec Of Door Hardware : Edgemount mechanical latch.
The Spec Of Door Hardware : 1. Good casting ability and resist erosion.
2. Good tensile strength and resist compact.
The Spec Of Door Hardware : GR-180AC, tiger operator, it is like the name it calls. The motor goes very stable like tiger walks in jungle with awe-inspiring spirit so that pedestrian no need to worry the secure issue when goes into and goes out the door leaf. Fabricator can also free adjust any idea function from its micro-computer controller in....
The Spec Of Door Hardware : Nylon tyre ball bearing wheel, 38mm diameter, full race type.
The Spec Of Door Hardware : 1. It was designed for shutters and manual door.
2. It can be operate with manual slats and other shutter system.
3. Spring wire can make you lift shutters easier.
The Spec Of Door Hardware : 1. Radio remote control (individual control) for tubular motor and other type roller door motors.
2. Leading technology design with anti-code function.
The Spec Of Door Hardware : Radio AC multi remote control. It can control up to 4 tubular motors and simultaneous control motors by push bottom switch. Suitable for shutter control operators and other shutter system.
The Spec Of Door Hardware : 1. 288RB remote control was a integrated radio remote control(Individual Control) for tubular motor and other type roller door motors.
2. Leading technology and model design with anti-code function.
The Spec Of Door Hardware : 1. Ø35/Ø45 motor pin stud was designed screwed on the head of 35mm and 45mm tubular motor.
2. It was suitable for blind or projection screen operation system.
3. It can be screwed on wall bracket or fixed on the wall directly.
The Spec Of Door Hardware : 1. Ø44 octagonal aluminum tube was designed for TESC 35mm tubular motor.
2. It was operate with octagonal drive adapter.
3. Tubular motor have to insert into aluminum tube, then it work.
4. Length of tube will depends on width of your window.
5. Measuring dimension of your windows before you start to ins....
The Spec Of Door Hardware : 1. Ø35 motor pin stud was specialized for 35mm tubular motor use only.
2. It was usually operate with bracket pin stud and used for light shutter operation system.
3. Good motor pin system can make stable operation performance.
The Spec Of Door Hardware : 1. Mounting stud was designed for tubular motor at the head of tube. 2. It was suitable for shutters and heavy operation system and it have to opoerate with motor square bolt pin stud.
3. It can offer good and stable holding performance for operating.
The Spec Of Door Hardware : 1. Ø12mm shaft stud was designed for install at the end of tube.
2. It was suitable for blind or projection screen operation system for reduce gap between the wall.
3. It can be screwed on wall bracket or fixed on the wall directly.
The Spec Of Door Hardware : 1. Ø12 bearing was designed for tubular motor installed at the end of tube.
2. It was suitable for shutter and heavy operation system.
3. It have to opoerate with Ø28 bearing bracket and it can offer good lubricity performance for operating.
The Spec Of Door Hardware : 1. Ø65 octagonal aluminum tube was designed for TESC 45mm tubular motor.
2. It was operate with octagonal drive adapter.
3. Tubular motor have to insert into aluminum tube, then it work.
4. Length of tube will depends on width of your window.
5. Measuring dimension of your windows before you start to install tubul....
