The Spec Of Resistor Manufacturers : 1. The LL-S192 SMD is much smaller than lead frame type components, thus enable smaller boad size, higher packing density, reduced storage space and finally smaller equipment to be obtained.
2. Besides, lightweight makes them ideal for miniature applications and so forth.
The Spec Of Resistor Manufacturers : 1. Capacitors: 0201, 0402, 0603, 0805, 1206, 1210, 1808, 1812.
2. Resistors: 0402, 0603, 0805, 1206.
The Spec Of Resistor Manufacturers : Introduction of CR: featuring consistency and stably-controlled, these carbon film resistors with reasonable prices are widely & largely used in the electronic, electrical and information industries.
This resistor is a ceramic bar tightly coated with a carbon film which is composed of carbon separated from organic com....
The Spec Of Resistor Manufacturers : Features:
Used for various types of electronic parts.
The Spec Of Resistor Manufacturers : 1. Low back reflection.
2. High power endurance.
3. Wavelength independent.
4. Low PDL.
5. Precise control of attenuation range.
6. Simple manipulation.
The Spec Of Resistor Manufacturers : 1. GET's SM and MM Attenuators can be applied to adjust the power levels of signals in optical communications at the output of light sources, E/O converters and for testing the linearity or dynamic range of optical power meters.
2. GET Attenuators can also be used in optical amplifier systems to balance the gain acros....
The Spec Of Resistor Manufacturers : 1. Metal oxide varistors is a voltage dependent resistor with symmetrical voltage-current characteristics that is designed to protect all kinds of electronic devices or elements from switching and induced lightening surges.
2. It's non linear exponent characteristic with broad using range and mass production is gradua....
The Spec Of Resistor Manufacturers : 1. Description: horizontal type with shaft.
2. Applications: suitable for car-audio, TV, VTR, household applicances, measuring equipment and other consumer or industrial products.
The Spec Of Resistor Manufacturers : 1. Small in size comparatively.
2. Electrical and mechanical stability and high reliability.
3. Nonflame painting, "SOLVENT" proff, resistive to heat & humidity.
4. Annual shift is low for the strengthened metal oxide film.
5. Low noise, can product high resistance value which wire wound resistors can....
The Spec Of Resistor Manufacturers : 1. LC-FC/SC male-female type.
2. FC-LC male-female type.
3. SC-ST/LC/FC male-female type are available.
The Spec Of Resistor Manufacturers : The attenuators are built in with wavelength independent optical filters and feature high power endurance and low PDL. These products are suitable for high speed transmission.
1. Low back reflection.
2. High power endurance.
3. High confidence.
4. Precise control of attenuation range.
5. Easy installation.
The Spec Of Resistor Manufacturers : Encode potentiometer.
The Spec Of Resistor Manufacturers : 1. Big in volume, causing quick dissipation of heat and low temperature rise.
2. Good in quality stability and reliability.
The Spec Of Resistor Manufacturers : 1. Low price Small size.
2. both standard winding type and non-inductive winding type are available.
3. High power short Excellent load life stability.
4. Termminal arrangements should be separately specified.
5. Excellent short time over load.
6. High-surge-resistant items are also available.
7. Strongly re....
The Spec Of Resistor Manufacturers : 1. ceramic potting, greater safety.
2. there are two kinds of core which woundwire and oxide.
3. high power, longer load life under large load.
4. wind resistance range.
The Spec Of Resistor Manufacturers : 1. Ceramic potting, greater safety.
2. There are two kinds of core which woundwire and oxide.
3. High power, longer load life under large load.
4. Wind resistance range.
The Spec Of Resistor Manufacturers : 1. ceramic potting, greater safety.
2. there are two kinds of core which woundwire and oxide.
3. high power, longer load life under large load.
4. wind resistance range.
The Spec Of Resistor Manufacturers : 1. Small and light weight.
2. Excellent heat resistance and moisture resistance.
3. Taping & bulk casette are available for automatic pick-and place machines.
4. Lead free products are available.
The Spec Of Resistor Manufacturers : Motor resistor can be installed in the carburetor of car or motorcycle as a heater, and also can be a pseudo-load fitting for car or motorcycle lights. Resistors become very hot and must be mounted to metal or stainless steel and away from paint work, plastics and rubbers. SQC also can be separated into two according t....
The Spec Of Resistor Manufacturers : 1. Wire wound resistors are made by winding the resistance wire non-corrosive, heat-proof and humidity-proof material.
2. Industry lowest cost.
3. Delivery from stock in bulk taped, and strip pack.
4. Exceptional long-term stability.
5. Standard tolerance: 5%.
The Spec Of Resistor Manufacturers : 1. High power rating, small size and ultra precision.
2. Standard winding & non-inductive winding types.
3. High stability, strong construction.
The Spec Of Resistor Manufacturers : 1. Strong terminals (4.5-20kg / 30sec).
2. Resistance temp. coeff400, 260, 100PPM/℃.
3. Resistance velue unchanged after longterm use.
4. Short time over(2%0.05).
5. Multi-terminal types or adjustable types available.
6. Insulation resistance 500V 20M min.
The Spec Of Resistor Manufacturers : 1. Automotive: backlighting in dashboard and switch.
2. Telecommunication: indicator and backlighting in telephone and fax.
3. Flat backlight for LCD, switch and symbol.
4. General use.
The Spec Of Resistor Manufacturers : 1. Interior and exterior lighting.
2. Dashboard illumination.
3. Indicator and backlighting purposes for audio, video, LCD’s switches, symbols, illuminated advertising etc.
The Spec Of Resistor Manufacturers : 1. These devices have been designed to meet the increasing demand for surface mounting technology.
2. It consists of a lead frame which is embedded in a white thermoplast. The reflector inside this package is filled up with clear epoxy.
3. The package of the LL-R3528 is the PLCC-4 (equivalent to a size B tantalum cap....
The Spec Of Resistor Manufacturers : 1. Vertical type with shaft.
2. Pitch: 5 x 10mm.
3. High quality, best reliability.
4. Long operation life.
5. Dust-proof knob can be attached.
6. Can be cleaning by ultrasonic degreasor with freon or deionized water.
7. Audio & video products: such as TV receivers monitors, VCR, satellite receivers, etc.
8. Tel....
The Spec Of Resistor Manufacturers : 1. Vertical type.
2. Pitch: 5 x 10mm.
3. High quality, best reliability.
4. Long operation life.
5. Dust-proof knob can be attached.
6. Can be cleaning by ultrasonic degreasor with freon or deionized water.
7. Audio & video products: such as TV receivers monitors, VCR, satellite receivers, etc.
8. Telephones, a....
The Spec Of Resistor Manufacturers : 1. Vertical type with cover.
2. Pitch: 5 x 5mm.
3. High quality, best reliability.
4. Long operation life.
5. Dust-proof knob can be attached.
6. Can be cleaning by ultrasonic degreasor with freon or deionized water.
7. Audio & video products: such as TV receivers monitors, VCR, satellite receivers, etc.
8. Tele....
The Spec Of Resistor Manufacturers : 1. Vertical type with cover, bule & white color.
2. Pitch: 5 x 5mm.
3. High quality, best reliability.
4. Long operation life.
5. Dust-proof knob can be attached.
6. Can be cleaning by ultrasonic degreasor with freon or deionized water.
7. Audio & video products: such as TV receivers monitors, VCR, satellite rece....
