Select
The Spec Of SMD LED : 1. The LL-S192 SMD is much smaller than lead frame type components, thus enable smaller boad size, higher packing density, reduced storage space and finally smaller equipment to be obtained.
2. Besides, lightweight makes them ideal for miniature applications and so forth. 1. 1.6mm x 0.8mm SMT LED, 0.6mm thickness.....
Select
The Spec Of SMD LED : 1. Working voltage: 12V DC.
2. Length 30cm with 12 superbright tri-chip RGB SMD LED .
3. Width: 8mm.
4. Color: RGB color-changing.
5. Beam aAngle: 120 degree.
6. Waterproof IP67, suitable for outdoor use.
7. Easy connection with snap-in connectors.
8. Solid-state, high shock and vibration resistant.
9. Major red....
Select
The Spec Of SMD LED : 1. SMD LEDs with 100 to 600mcd luminous intensity and 20mA forward current, in reel package.
2. Available colors: white, green, blue, red, yellow and orange.
3. Applications: made of flexible PCB with self-adhesive backing. 1. Forward voltage: 1.8 to 3.8V.
2. Forward current: 20mA.
3. Luminous intensity: 100 to....
Select
The Spec Of SMD LED : 1206 red LED SMD, used for backlight, decoration and indicator. 1. Type: LED SMD
2. Dimension: 3.2x1.6x1.1 mm.
3. Wavelength: 620-630nm.
4. Forward voltage (V): 1.7-2.8.
5. Forward current (mA): 20.
6. Luminous intensity (MCD): 70-345.
7. Package type: 3000pcs/reel.
8. Viewing angle: 120°.
9. Applications:....
Select
The Spec Of SMD LED : 1. Available color: RGB full-color.
2. Easy to install by the 3M tape on the PCB back.
3. Low power consumption, high intensity.
4. Certifications: RoHS and CE.
5. Applications:
(1) Car decoration.
(2) Architectural decorative lighting.
(3) Archway, canopy and bridge edge lighting.
(4) Amusement park, theate....
Select
The Spec Of SMD LED : 1. Adopts high quality SMD (5 x 5 size) as light sources.
2. With 0.15mm super thin FPC as the base PCB, randomly flexible and installing.
3. Two-wire connection, three-piece LEDs as a basic unit, randomly detachable and connecting.
4. With remote controller to realize horse racing, gradual change and light changi....
Select
The Spec Of SMD LED : 1. Surface mount LED.
2. Low power consumption.
3. Wide viewing angle.
4. Ideal for backlight and indicator. 1. Dimension: 1.2 x 0.6 inch, 0.25mm ply.
2. Various colors and lens types are all able. ....
Select
The Spec Of SMD LED : 1. Working voltage: 12V DC.
2. Length 30cm with 12 superbright tri-chip RGB SMD LED .
3. Width: 8mm.
4. Color: RGB color-changing.
5. Beam aAngle: 120 degree.
6. Waterproof IP67, suitable for outdoor use.
7. Easy connection with snap-in connectors.
8. Solid-state, high shock and vibration resistant.
9. Major red....
Select
The Spec Of SMD LED : 1. LED light bar with different voltage, color and type of LED.
2. Long life; low power consumption.
3. Energy saving.
4. 100% made in Taiwan.
5. Custom-made spec is acceptable with MOQ. Application:
Any place where there is lighting source needed. ....
Select
The Spec Of SMD LED : With 198pcs full color SMD LED . 1. Cutting line: 50mm (3 LEDs).
2. Power input: DC 12V.
3. Total current: <4A.
4. Max. power consumption: ≤47.5W.
5. Operating temperature at -20°C to 50°C.
6. Storage temperature at -30°C to 65°C.
7. Average life hours: 50000Hrs.
8. 3000 (L) x 12 (W) x 1.8 (H) mm. ....
Select
The Spec Of SMD LED : 1. Decorative lighting.
2. Archway, canopy and bridge edge lighting.
3. Accent lighting and outdoor illuminated signs.
4. Amusement park, theater and aircraft cabin mood lighting.
5. Landscape outlines and signal lighting.
6. Advertisement signs. 1. LED type: 5050 SMD.
2. LED quantity: 30 pieces/ meter.
3....
Select
The Spec Of SMD LED : 1. Hi-power LED: good for automotive exterior and interior lighting. 2. Architectural lighting and general lighting. Presently we can supply 3W, 5w, 10w high power LED lamps. 1. Features:
(1) High luminance, wide view angle.
(2) Very long operating life, low thermal resistance.
(3) Energy efficient....
Select
The Spec Of SMD LED : 1. It has the advantages of safety, low power consumption, environmental friedly, long lifetime, and multicolor.
2. It is used for decoration. 1. LED quantity: 80pcs.
2. LED color: red.
3. Input voltage: 240V.
4. Unit power consumption: 4.8W.
5. Unit length: 100cm.
6. LED space: 1.25cm. ....
Select
The Spec Of SMD LED : 1. Indoor and outdoor displays.
2. Backlighting.
3. Coupling into light guides.
4. RGB full color displays. 1. 5.0 x 5.0mm SMD.
2. Lens color: water transparent.
3. Viewing angle: 120 deg.
4. Surface color: black coated surface.
5. Wavelength at peak emission (R/G/B): 620nm, 520nm, 465nm.
6. Dominan....
Select
The Spec Of SMD LED : 1. The Chip-LED taping is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained.
2. Besides, lightweight makes them ideal for miniature application, etc.
3. Applications: indicators,automotive(backlighti....
Select
The Spec Of SMD LED : 1. Length 50cm with 30cm top SMD LED , width 8mm.
2. Non-waterproof IP65, rigid type.
3. Runs on 12V systems .
4. Easy connection with snap-in connectors.
5. Solid-state, high shock or vibration resistant.
6, Major reduction in power costs.
7. Wide angle SMD LED used, making the light output smooth and even.
8. N....
Select
The Spec Of SMD LED : 1. Automotive: backlighting in dashboard and switch.
2. Telecommunication: indicator and backlighting in telephone and fax.
3. Flat backlight for LCD, switch and symbol.
4. General use. 1. 1.8mm * 0.8mm SMT LED, 0.6mm thickness
2. Low power consumption
3. Wide viewing angle
4. High efficient InGaN technology
....
Select
The Spec Of SMD LED : 1. Interior and exterior lighting.
2. Dashboard illumination.
3. Indicator and backlighting purposes for audio, video, LCD’s switches, symbols, illuminated advertising etc. 1. Single color.
2. Utilizing InGaN on SiC technology.
3. Suitable for all SMT assembly and solder process.
4. Availble on tape and reel....
Select
The Spec Of SMD LED : 1. These devices have been designed to meet the increasing demand for surface mounting technology.
2. It consists of a lead frame which is embedded in a white thermoplast. The reflector inside this package is filled up with clear epoxy.
3. The package of the LL-R3528 is the PLCC-4 (equivalent to a size B tantalum cap....
Select
The Spec Of SMD LED : Applications: indoor/outdoor message displays, traffic signal lights and automotive lights, etc.
1. 1.8mm round subminiature axial LED.
2. Excellent quality.
3. High brightness. 1. Material: gaaias.
2. Emitted color: super bright red.
3. Len color: water clear.
4. VF (v) at if=20 ma : typ 1.8, max 2.5.
5. IV....
Select
The Spec Of SMD LED : Applications for: indoor& outdoor message displays, traffic signal lights and automotive lights, etc.
1. High performance with reflector LED.
2. Low power consumption and low forward voltage. 1. Material: ingan.
2. Emitted color: blue.
3. Len color: water clear.
4. Vf (v) at if=20 ma : typ 3.5, max 4.0.
5. Iv....
Select
The Spec Of SMD LED : 0603 yellow LED SMD, used for backlight, decoration and indicator. 1. Type: LED SMD
2. Dimension: 1.6x0.8x0. 8 mm.
3. Wavelength: 585-595nm.
4. Forward voltage (V): 1.7-2.8.
5. Forward current (mA): 20.
6. Luminous intensity (MCD): 80-540.
7. Package type: 4000pcs/reel.
8. Viewing angle: 120°.
9. Applicati....
Select
The Spec Of SMD LED : 3528 blue LED SMD, used for backlight, decoration and indicator. 1. Type: LED SMD
2. Dimension: 3.5x2.8x1.9 mm.
3. Wavelength: 465-475nm.
4. Forward voltage (V): 1.7-2.8.
5. Forward current (mA): 20.
6. Luminous intensity (MCD): 125-420.
7. Package type: 2000pcs/reel.
8. Viewing angle: 120°.
9. Application....
Select
The Spec Of SMD LED : 1. Surface mount LED.
2. Low power consumption.
3. Wide viewing angle.
4. Ideal for backlight and indicator. 1. Dimension: 3.2 x 2.7 inch, 1.1mm ply.
2. Various colors and lens types are all able. ....
Select
The Spec Of SMD LED : 0805 white LED SMD, used for backlight, decoration and indicator. 1. Type: LED SMD.
2. Dimension: 2.0 x 1.25 x 0.68nm.
3. Forward voltage: 3.0 - 3.8.
4. Forward current (mA): 20.
5. Luminous intensity (mcd): 450 - 1800.
6. Package type: 3000 pcs/ reel.
7. Viewing angle: 120°.
8. Applications: for backligh....
Select
The Spec Of SMD LED : 5050 full color LED SMD, used for backlight, screen and indicator. 1. Type: LED SMD。
2. Dimension: 5.0 x 5.0 x 1.95 mm
3. Wavelength: 620 - 630nm
(1) Forward voltage (V): 1.7 - 2.8.
(2) Luminous intensity (mcd): 250 - 600.
4. Wavelength: 515 - 525nm
(1) Forward voltage (V): 3.0 - 3.8.
(2) Luminous intensit....
Select
The Spec Of SMD LED : 1. Descriptions:
(1) The R3528 is available in soft orange, green, blue and yellow. (2) Due to the package design, the LED has wide viewing angle and optimized light coupling by inter reflector, this feature makes
the SMT TOP LED ideal for light pipe application.
(3) The low current requirement makes this device ....
Select
The Spec Of SMD LED : 1. The SMD-LED taping is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained.
2. Besides, lightweight makes them ideal for miniature application, etc.
3. Applications: indicators, automotive (backlight....
Select
The Spec Of SMD LED : 1. The chip-LED taping is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained.
2. Besides, lightweight makes them ideal for miniature application, etc.
3. Applications: indicators,automotive(backlighti....
Select
The Spec Of SMD LED : 1. The chip-LED taping is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained.
2. Besides, lightweight makes them ideal for miniature application, etc.
3. Applications: indicators,automotive(backlighti....
Select
The Spec Of SMD LED : 1. The SMD-LED taping is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained.
2. Besides, lightweight makes them ideal for miniature application, etc.
3. Applications: indicators,automotive(backlightin....
Select
The Spec Of SMD LED : 1. The Chip-LED Taping is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained.
2. Besides, lightweight makes them ideal for miniature application, etc.
3. Applications: indicators,automotive(backlighti....
Select
The Spec Of SMD LED : 1. Indicators.
2. Iuminations.
3. LCD back lights.
4. RGB full color displays. 1. 5.0 x 5.0mm SMD.
2. Lens color: yellow.
3. Emitting color: white.
4. Viewing angle: 120 deg.
5. Dice material: InGaN.
6. Forward voltage (CHIP1) (Typ./Max.): 3.4V, 4.0V.
7. Forward voltage (CHIP3) (Typ./Max.): 10.2V,....
Select
The Spec Of SMD LED : 1. Indicators.
2. Iuminations.
3. LCD back lights.
4. RGB full color displays. 1. 3.0 x 2.0mm SMD.
2. Lens color: water transparent.
3. Emitting color: red.
4. Viewing angle: 120 deg.
5. Dice material: alGalnP.
6. Forward voltage (Typ./Max.): 2.0V, 2.5V.
7. Luminous intensity (Min./Typ.): 224mcd, ....
Select
The Spec Of SMD LED : 1. Indicators.
2. Iuminations.
3. LCD back lights.
4. RGB full color displays. 1. 3.0 x 2.0mm SMD.
2. Lens color: water transparent.
3. Emitting color: red.
4. Viewing angle: 120 deg.
5. Dice material: AlGalnP.
6. Forward voltage (Typ./Max.): 2.0V, 2.5V.
7. Luminous intensity (Min./Typ.): 224mcd, 3....
Select
The Spec Of SMD LED : 1. Indicators.
2. IIIuminations.
3. LCD back lights.
4. RGB full color displays. 1. 3.0 x 2.0mm SMD.
2. Lens color: water transparent.
3. Emitting color: green.
4. Viewing angle: 120 deg.
5. Dice material: InGaN.
6. Forward voltage (Typ./Max.): 3.4V, 4.0V.
7. Luminous intensity (Min./Typ.): 560mcd,....
Select
The Spec Of SMD LED : 1. Indicators.
2. IIIuminations.
3. LCD back lights.
4. RGB full color displays. 1. 3.0 x 2.0mm SMD.
2. Lens color: water transparent.
3. Emitting color: Blue.
4. Viewing angle: 120 deg.
5. Dice material: InGaN.
6. Forward voltage (Typ./Max.): 3.4V, 4.0V.
7. Luminous intensity (Min./Typ.): 180mcd,....
Select
The Spec Of SMD LED : 1. Indicators.
2. IIIuminations.
3. LCD back lights.
4. Automobile's applications. 1. 3.0 x 2.0mm SMD.
2. Lens color: water transparent.
3. Emitting color: amber.
4. Viewing angle: 120 deg.
5. Dice material: AlGalnP.
6. Forward voltage (Typ./Max.): 2.0V, 2.5V.
7. Luminous intensity (Min./Typ.): 280....