Select
The Spec Of Electric Power Tools : 1. Into force: 1050W.
2. Current: 9.5A.
3. No-load speed: 4500rpm. 1. Cutting depth at 45: 46mm.
2. Cutting depth at 90: 66mm.
3. Cutting angle: 0 - 45°.
4. Saw the largest size: 190mm.
5. Insulation level: class E. ....
Select
The Spec Of Electric Power Tools : Features:
1. Positive retention of wire rope on to drum.
2. Electromagnetic spring-applied fail safe brake.
3. Heavy duty high efficiency ball bearing on all running surfaces.
4. Planetary gearing for maximum mechanical efficiency.
5. Enclosed drum flanges.
6. Quiet running.
7. Heavy duty IP65 waterproof switch ....
Select
The Spec Of Electric Power Tools : Full auto shut off electric screwdriver. 1. Power source: 35VDC.
2. Free speed: 720 RPM.
3. Torque accuracy: 3%.
4. Torque setting: stepless.
5. Torque range: 0.35-1.3 IN-LB (0.4-1.5KGF-CM).
6. Net weight: 310g (0.68 LBS).
7. Overall length: 208MM (8.2").
8. Bit shank: -1/4". ....
Select
The Spec Of Electric Power Tools : Electric screwdriver D.C. type with power supply. Auto shut-Off design. Used for electronic products assembling line. Such
as computer assembling line. 1. Power source: 35 vdc.
2. Free speed: 720 rpm.
3. Torque accuracy: 3%.
4. Torque setting: stepless.
5. Torque range: 1.3 - 8.7 in-lb(1.5-10.0kgf-cm).
6. Net....
Select
The Spec Of Electric Power Tools : Electric screw driver (power screw gun):
1. Collated screws.
2. Wholesale or retail.
3. Belt screw/strio screw.
4. 2009 new product. 1. Moq 300 sets.
2. Voltage: 230V 50Hz /110V 60Hz.
3. No load speed: 0- 4000 R.P.M.
4. Power input: 550W.
5. Screw length: 15-55 MM.
6. Screw outer diameter: 3-5 MM.
7. Weig....
Select
The Spec Of Electric Power Tools : 1. Power supply AC adaptor.
2. Machine size: 140(L) x 25(W)mm.
3. RPM: 18000-20000. 1. Function: engraves any surface.
2. Power supply: AC adaptor.
3. Machine size: 140(L) x 25(W)mm.
4. Machine weight: 0.359kgs.
5. Body material: ABS.
6. RPM: 18000-20000.
7. Accessories: with 1 tips.
8. Pac....
Select
The Spec Of Electric Power Tools : 1. Patented, twin piston designed for greater productivity.
2. Patented, bracket easy to install.
3. Patented, variable speed control trigger with electric brake.
4. Patented, ergonomic anti-fatigue carrying strap.
5. As low as 2.5 minutes to dispense one 14 oz. (397g) grease cartridge (at normal pressure).
6....
Select
The Spec Of Electric Power Tools : 1. Full-automatic.
2. Trigger start clutch type.
3. AC110V~120V, 50/60Hz, 0.3A
4. Other model No.: TM-8110L/TM-8116L. 1. Lengh: 235mm (without bit).
2. Weight: 540g (without cable). ....
Select
The Spec Of Electric Power Tools : Electric screw driver (power screw gun):
1. Collated screws.
2. Wholesale or retail.
3. Belt screw/strio screw.
4. 2009 new product. 1. Moq: 300 sets.
2. Voltage: 230V 50Hz /110V 60Hz.
3. No load speed: 0- 4000 R.P.M.
4. Power input: 550W.
5. Screw length: 15-55 MM.
6. Screw outer diameter: 3-5 MM.
7. Wei....
Select
The Spec Of Electric Power Tools : 1. Power output: 450w.
2. Amp: 4.3A.
3. Chuck capacity: 13mm.
4. In wood: 30mm. 1. In steel: 13mm.
2. R.P.M: 1,250.
3. Net weight: 3Kg.
4. Cord lengh: 2.5m(8.2"). ....
Select
The Spec Of Electric Power Tools : 1. Easy operation, convenient carry, durable structure.
2. Use in tiny room space, can upgrade working efficiency available to use angle screwdriver.
3. Best quality, excellent structure to operate easily 25mm & 45mm length bits usable.
4. Operating by impact driver.
5. Ideal for professional installation: small ro....
Select
The Spec Of Electric Power Tools : 1. Airless-give professional results without compressor.
2. With unlimited uses, the gun can be used indoor and outdoor.
3. Also for motorcycles and cars.
4. Paints five times faster then using brushes.
5. Compact, lightweight, easy to use.
6. Housing material: plastic. 1. Max. deliver rate: 170 g/min.
2. Vol....
Select
The Spec Of Electric Power Tools : 1. Foundation: according to customers, design, custom made design, OEM.
2. Application: LED work light, LED inspection lamp, LED work lamp, repairing lamp, handlamp.
3. Usage: car repairing, auto care, inspection lamp, car accessories. 1. LED: 21 (white color) + 6 pieces on head of unit.
2. Ni-MH battery pack ....
Select
The Spec Of Electric Power Tools : Aftermarket starter assembly for chainsaw. These complete with the starter pulley, spring, rope and handle, all assembled on the cover ready to blot on. ....
Select
The Spec Of Electric Power Tools : High standard specification as standard, SX3 chain hoists provide a high specification:
1. Two speed hoisting.
2. Frequency controlled trolley drives for smooth traversing and minimal load swing.
3. Upper and lower hoist limit switches.
4. Slipping clutch load limiter.
5. Hoist motors insulated to class F, 40% ED....
Select
The Spec Of Electric Power Tools : 1. Power input: 420w.
2. Amp: 4A.
3. Chuck capacity: 10mm.
4. In wood: 25mm.
5. In Steel: 10mm. 1. In concrete: 10mm.
2. R.P.M: 0~2,800.
3. B.P.M: 0~44,800.
4. Net weught: 1.4Kg.
5. Cord lengh: 2.5m(8.2"). ....
Select
The Spec Of Electric Power Tools : 1. Power input: 1050w.
2. Amp: 10A.
3. R.P.M: 3,000.
4. Net weught: 5.6Kg.
5. Cord lengh: 2.5m(8.2"). We can produce any sizes and styles as your requests, welcome OEM. ....
Select
The Spec Of Electric Power Tools : 1. Power input: 1,000w.
2. Amp: 9.5A.
3. Wheel diamter: 5".
4. Hole diameter: 7/8".
5. R.P.M: 11,000.
6. Net weight: 2.5Kg.
7. Cord lengh: 2.5m(8.2"). We can produce any sizes and styles as your requests, welcome OEM. ....
Select
The Spec Of Electric Power Tools : 1. Power input: 480w.
2. Amp: 4.2A.
3. In wood: 85mm.
4. In steel: 8mm.
5. R.P.M: 600~3,000.
6. Net weight: 2kg.
7. Cord lengh: 2.5m(8.2"). We can produce any sizes and styles as your requests, welcome OEM. ....
Select
The Spec Of Electric Power Tools : 1. Power input: 1,300w.
2. Amp: 12A.
3. Blade diameter: 192mm.
4. Arbor: 20mm.
5. Max. cutting depth: 65mm.
6. R.P.M: 3,800.
7. Net weight: 5.5Kg.
8. Cord lengh: 2.5m(8.2"). We can produce any sizes and styles as your requests, welcome OEM. ....
Select
The Spec Of Electric Power Tools : 1. Power input: 730w.
2. Amp: 7A.
3. Rubber pad diameter: 6".
4. Spindle size: m16x2.
5. R.P.M: 4,000.
6. Net weight: 3kg.
7. Cord lengh: 2.5m(8.2"). We can produce any sizes and styles as your requests, welcome OEM. ....
Select
The Spec Of Electric Power Tools : 1. Power input: 730w.
2. Amp: 7A.
3. Wool wheel: 7".
4. Sponge pad size: 7".
5. Spindle size: M16x2.
6. R.P.M: 2,200.
7. Net weight: 2.5kg.
8. Cord lengh: 2.5m(8.2"). We can produce any sizes and styles as your requests, welcome OEM. ....
Select
The Spec Of Electric Power Tools : 1. Power input: 1,000w.
2. Amp: 9.5A.
3. Blade diameter: 190mm.
4. Arbor: 20mm.
5. In wood: 65mm.
6. In Steel: 46mm.
7. R.P.M: 4,500.
8. Net weight: 4.5kg.
9. Cord lengh: 2.5m(8.2"). We can produce any sizes and styles as your requests, welcome OEM. ....
Select
The Spec Of Electric Power Tools : 1. Power input: 850w.
2. Amp: 8A.
3. Length of stroke: 29mm.
4. R.P.M: 0~2,400.
5. Net weight: 3.6kg.
6. Cord lengh: 2.5m(8.2"). We can produce any sizes and styles as your requests, welcome OEM. ....
Select
The Spec Of Electric Power Tools : 1. Into force: 7100W.
2. Current: 7A.
3. No-load speed: 1200rpm. 1. Clipping capacity: 13mm.
2. Wood drilling capacity: 30mm.
3. Metal drilling capacity: 13mm.
4. Cable length: 2.5m.
5. Insulation level: class E. ....
Select
The Spec Of Electric Power Tools : 1. Into force: 500W.
2. Current: 4.5A.
3. No-load speed: 2500rpm. 1. Cable length: 2.5m.
2. Insulation level: class E. ....
Select
The Spec Of Electric Power Tools : 1. Into force: 450W.
2. Current: 4.0A.
3. No-load speed: 4800rpm. 1. Clipping capacity: 10mm.
2. Wood drilling capacity: 25mm.
3. Metal drilling capacity: 10mm.
4. Cable length: 2.5m.
5. Insulation level: class E. ....
Select
The Spec Of Electric Power Tools : 1. Into force: 250W.
2. Current: 2.3A.
3. No-load speed: 2900rpm. 1. Clipping capacity: 10mm.
2. Wood drilling capacity: 20mm.
3. Metal drilling capacity: 10mm.
4. Cable length: 2.5m.
5. Insulation level: class E. ....
Select
The Spec Of Electric Power Tools : 1. Into force: 450W.
2. Current: 4.0A.
3. No-load speed: 1350rpm. 1. Clipping capacity: 10mm.
2. Wood drilling capacity: 25mm.
3. Metal drilling capacity: 10mm.
4. Cable length: 2.5m.
5. Insulation level: class E. ....