The Spec Of Pump Manufacturers : 1. Teflon industrial coating: our two factories are all Dupont LIA ( Licensee Industrial Application ) and ISO 9001 certificated.
2. Halar coating for stainless steel ducts for semiconductor industry: FM 4922 approved.
3. Conveyorized oven coating: using various paints contain fluoropolymer and silicon for mass qu....
The Spec Of Pump Manufacturers : UH-210 is an advanced design triplex pump with flexibility and versatility to efficiently meet the requirements of a wide range of pumping services. The unit is designed to meet the heavy-duty requirements of continuous operation and to minimize maintenance.
1. Features:
(1) Easy field maintenance.
(2) Ceramic plung....
The Spec Of Pump Manufacturers : 1. Series number: DS.
2. Output flow cc/rev): 12.
3. Mounting type: flance mounting type.
4. Shaft rotating(view from shaft end): clockwise. 1. Model: (1)DS-12 (2)DS-13 (3)DS-14 2. Operating characteristic at 1800r.p.m. and oil temperature 40°C (1)output flow(liter/min): a. 0kgf/cm²: 7.7, 12.6, 22.1 b.....
The Spec Of Pump Manufacturers : 1. Sotek Technology Co., Ltd., a company endeavors to be perfect on quality, service, competition, and responsibility, spinning off in 2004 from Soartek Co., Ltd. (established in 1989), now managed by Mr. Sunny Liu.
2. Mr. Liu believes quality is the only and the best way to compete and survive. This goal has stimulat....
The Spec Of Pump Manufacturers : Single phase induction motor
pump motor 1) Voltage: 100V 50Hz / 60Hz, 115V 50Hz, 230V 50Hz
2) Power: 1/2HP, 3/4HP, 1HP
3) Rated speed: 1,420rpm, 1,700rpm CW CCW
4) Rated torque: 2.1N.m, 2.4N.m ....
The Spec Of Pump Manufacturers : 1. Quick output oil finished by two-section of high-low pressure, type of suction oil reach the most effective oil capacity.
2. single hole type of in-out oil controlled uit terminal, cable cut, punch, distributed/equipped electric tray and so on over fifty functions.
3. The pressure safe valve overloading protectiv....
The Spec Of Pump Manufacturers : 1. Universal: our products can be applied to multiple purpose. We can offer different alloy products according to customers' requests.
2. Economical: we are well equipped to make mass production and to reduce unnecessary production procedures.
3. Accurate: accuracy is a main factor in our production. We also provid....
The Spec Of Pump Manufacturers : 1. Aluminum alloy pump.
2. Inlet / outlet 1-1/2" NPT.
3. Air inlet 1/2" NPT.
4. Min. pressure for starting air valve 1.3 bar.
5. Max flow rate: 79.75G.P.M. (300 LPM).
6. Max. air consumption 1700 NL/min. 1. Weight of pump 16 kgs.
2. Dimensions: 40 x 29 x 45 cm. ....
The Spec Of Pump Manufacturers : 1. Specially compounded elastomer and high-strength bonding assure extended service life.
2. Variety sizes and dimensions are available. Customer can purchase the finished good directly.
3. Customer dimension and design mold is also acceptable. 1. The quality can reach zero head 1000HR x RPM1720 x RT°C.
2. C....
The Spec Of Pump Manufacturers : 1. High pressure, easy operation and maintenance.
2. Compactness, high efficient operation with minimum horsepower loss.
3. Maximum working pressure 210 kgf/cm².
4. Extremely low noise and durable.
5. Two pumps are connected by the same shaft. 1. Model number: variable vane pump + gear pump.
2. Mounting: ....
The Spec Of Pump Manufacturers : 1. UH series single stage cast iron pump.
2. Packing (LxHxW): 280 x 280 x 380. 1. Motor: 2 HP, 15 KW.
2. No Of Cyl: 1.
3. Air delivery: 180 L/min, 64 CFM.
4. Pressure: 145 PSI, 10 BAR.
5. RPM: 1180.
6. NW: 142 Kg, 31 Lbs. ....
The Spec Of Pump Manufacturers : We provide lighter, powerful and compact oil rotary van vacuum pump. This new design is with 110V 60Hz or 220V/50Hz, single stage or two stages. Pump rate from 1.5CFM to 8 CFM. This series vacuum pump has CE mark. Our vacuum pump can use different intake adapter such as 1/4" SAE, 1/8" SAE, 1/2" ACME ....
The Spec Of Pump Manufacturers : 1. Proportional electro-hydraulic load-sensing type.
2. Models: A16/A22/A37/A56. 1. Geometric displacement (cm3/rev; cu.in./rev):
(1) A16: 15.8 (.964).
(2) A22: 22.2 (1.355).
(3) A37: 36.9 (2.25).
(4) A56: 56.2 (3.43).
2. Please refer to attached specifications and information. ....
The Spec Of Pump Manufacturers : 1. Fully remote controlled, allows the operator to advance, hold or retract at any time.
2. Cuts and crimps can be adjusted as necessary by stopping the advance or retract mode.
3. 3/4 HP heavy-duty motor.
4. Durable steel construction with built-in carrying handle.
5. Auto-cycle mode.
6. Low amperage rerequiremen....
The Spec Of Pump Manufacturers : 1. It is the professional machine which is applied in the structure perfusion, equipped with super pressure. To solve out the inconvenience of the carrier, it is very light and it is the best choice of stanch worker.
(1) Speedy construction: can be advanced to 5000PSI in a few seconds, and the working time will be sho....
The Spec Of Pump Manufacturers : "Quality is life", which is a concept of ANSON HYDRAULICS. Due to all of ANSON employees purse the goad, we are developing high quality, high efficiency, long life and low sound levels intravane pumps. A wide variety of single and double configurations enables you to select the precise pump or combination bes....
The Spec Of Pump Manufacturers : Sumake air pumps for air compressors and also excellent source for different accessories. (Jetco Kit, air tools, electric motor. 1. Motor: 10hp (7.5 kw).
2. Air delivery: 1,246 l/min (44 c.f.m).
3. Free speed: 800 rpm.
4. Working pressure: 12.5 bar.
5. Max. Pressure: 14 bar.
6. Cylinder diameter (mm): 2x105,....
The Spec Of Pump Manufacturers : 1. Precision spur gear.
2. Helical gear.
3. Chain sprockets.
4. Straight bevel gears.
5. Worm wheels.
6. Splined shafts.
7. Pin clutches.
8. Flanges.
9. Bosses.
10. Bushes. 1. Quality class: AGMA-16 grade / DIN-2 grade / JIS-0 grade. 2. Quantity: gear-800,000 pcs/year; shafts-1,200,000 pcs/year; others-1,5....
The Spec Of Pump Manufacturers : Mountop Precision provides customers with heat-treatment finishing work, specializing in heat-treatment of high-speed steel and steel molds. In response to customer demand, Mountop Precision began the research and development of our own products, establishing a tool manufacturing plant producing cold-and hot-pressing p....
The Spec Of Pump Manufacturers : Yeh Der desings and manufactures various small gear pumps, like water gear pumps, oil gear pumps, etc. 1. Type: gear pump gearbox.
2. Dimensions: 28mm L x 27mm W x 12mm H.
3. Gear ratio: 1:1.
4. Torque: flexible. ....
The Spec Of Pump Manufacturers : 1. Design flexibility: investment casting produces near-net-shape configurations, offering designers and engineers freedom of design in a wide range of alloys. The process is capable of producing precise detail dimensional accuracy, and parts may weigh just a few ounces to many pounds.
2. Wide choice of alloys: avail....
The Spec Of Pump Manufacturers : Water Pump Product Features:
1. Compact Design, Small Size, Easy to install and dismantle
2. High Quality and high efficiency. Water Pump Operating Conditions: 1. Liquid temperature: Max. 60C 2. Ambient temperature: Max. 50C 3. Working pressure: Max. 5 kg/cm2 4. Suction lift:6M 5. Suitable for transport clean wa....
The Spec Of Pump Manufacturers : Features:
1. Spiral fluted wheel with multiple integeated spiral impellers, which provides a capability of rapid and precise combination and durability.
2. Connecting plate made of flexible materials, which protects the blades from being jammed and reduces friction during operation.
3. All body use stainless steel 3....
The Spec Of Pump Manufacturers : 1. Mechanical steering pull rod ( tie rod) for automobile.
2. For European, the U.S., and Japanese-made cars. 1. Product model: CIVIC 96~2000.
2. Use for HONDA. ....
The Spec Of Pump Manufacturers : 1. All aluminum alloy die casting casing.
2. Cast iron impeller for low pressure model
3. Aluminum alloy impeller for high pressure model.
4. Reinforced rubber pad for maximum service life. 1. Suction & discharge port: ø1½".
2. Maximum lift (M): 35.
3. Maximum delivery volume (L/MIN): 280.
4.....
The Spec Of Pump Manufacturers : INSTALLATIONS:
1. Adopt foot stand 53 gallon tank covered with wall mounted & mobile car.
2. The air inlet must be installed with the air cleaner to prevent dirt from entering into the air pilot valve and damaging components.
3. Employ single pipe and prevent dead angles in order to maintain smooth transporting.
4.....
The Spec Of Pump Manufacturers : 1. Cascade pump is special flow design, best for liquid drainage.
2. Equipped with auto-cut to prevent motor form burning.
3. Use world-renowned brand of mechanical seal. Without leaks, doesn't damage shaft, without the trouble of entering gland patching.
4. This machine type is produced in cooperation with tatting ....
The Spec Of Pump Manufacturers : Hand pump. 1. Plastic barrel: 1-1/4" x 9". 2. With screw type adapter to fit shrader valve. 3. Connector: 6 m/m x 300 m/m. ....
The Spec Of Pump Manufacturers : An operating pressure auto release sprayer will automatically depressurize to "0", when the stop cock of the spray gun is closed ( both the motor and the engine at the idling state ). If the stop cock of the spray gun is opened again, the pressure will automatically rise to normal pressure. This design featur....
The Spec Of Pump Manufacturers : 1. Two way vinyl hose for suction and discharge of fluids. Durable check valve.
2. Heavy-duty designed aluminum construction of containor tube and durable plunger. Capacity: 500 cc (bulk). ....
