Select
Directional control valve. 1. Max. pressure: 210 kg.
2. Valve size: ISO 04:300 I/min, ISO 06:500 I/min, ISO 10:1100 I/min.
3. Model numbers: chuck (CV), pilot operated chuck valve (PCV), manually operated directional valve (DMT), pilot directional valve (DS). ....
Select
Design description:
(1) Y-pattern.
(2) Bolted cover with drain plug.
(3) Perforated stainless steel screen.
(4) Available with 40 - 200 mesh screen. 1. Material:
(1) A216-WCB.
(2) A217-WC6.
(3) A352-LCB.
2. Ends:
(1) Flanged ends.
(2) Buttwelding ends.
3. Ratings:
(1) ANSI 150 and 300 LBS.
(2) JIS 10K ....
Select
Serving you in the following categories:
1. Teflon industrial coating: our two factories are all Dupont LIA ( Licensee Industrial Application ) and ISO 9001 certificated.
2. Halar coating for stainless steel ducts for semiconductor industry: FM 4922 approved.
3. Conveyorized oven coating: using various paints co....
Select
High quality and precision valve stem seals for DAIHATSU.
1. 90048-12005: engine model-AB, AD, CB, CL.
2. 90048-12009: engine model-EB, EF, EF-CS/ CL/ KL/ NS/ TS/ VS.
3. 90048-12011: engine model-HB, HC, HC-C/ E/ F, HD. We accept order of OEM and ODM, welcome customers' drawing and samples for cooperation of pro....
Select
1. Fire hose valve.
2. Wide applications, easy operation, safety, interchangeability. 1. Available sizes:
(1)1.5" FNPT x 1.5" FNPT.
(2)2.5" FNPT X 2.5" FNPT.
2. 1.5" FNPT X 1.5"MNPT, 2.5" FNPT X 2.5"MNPT. ....
Select
1. This products are made of tungsten carbide, with good hardness, wear-resistance, anti-corrosive.
2. The different grade and surface polishing use in the different processing request.
3. Application in: pen making trade ( pen core), and the accessory of valve. 1. Diameter: 0.02 - 20 mm.
2. According to your a....
Select
1. Valve stem: Acc. to ISO-5211 std.
2. Thread test: all threads are complied with the internationally recognized standards and tested with relative thread gauges (European / US/ Japanese Standards). Every fixtures and gauges are examined and adjusted regularly.
3. Request to process any other types of s/s items ar....
Select
1. Reduced port.
2. Investment casting.
3. Blowout proof stem.
4. Available material: ASTM A351 CF8M/CF8/ASTM A216 WCB. 1. Working pressure: 1000 psi / pn 63.
2. Working temperature: -20°F~ 400°F ( -29°c~ 200°c).
3. End connection: threaded ends.
4. Available size: 1/4”~ 2” (dn8~ dn50). ....
Select
1. KGN dispensing valve this valve is suitable for low viscosity liquids. Teflon wet-body part can be used all kinds of organic or in organic liquids.
2. ATV series valve is suitable for low viscosity liquids.
3. PCTE, PTFE, POM and SUS316 are the wet-body materials provided for choosing.
4. Wet-body material can be....
Select
1. We are a professional manufacturer and exporter of large ranges of tools, parts, valves, faucets, bathroom accessories, and hydraulic products.
2. Our products are manufactured for many OEM and ODM customers and sold in many countries.
3. We also welcome inquiries regarding any cooperation proposals. We can s....
Select
1. Material: CA15 stainless steel.
2. Country of origin: Taiwan. Sizes: 1" ~ 4". ....
Select
5/2 way mini mechanical valves: aluminum body provides high quality and durability. Various operating methods are suitable for different working environments. 1. Model: MSV30132-01, MSV40152-01.
2. Body material: aluminum alloy.
3. Port size: 1/8" PS or NPT.
4. Panel bore size: 12mm.
5. Fluid: compressed a....
Select
It has SUC use and Exh use. The material is the same as Japan genuine parts. 6HA、6CH、6LA and S165 engine use are recently developed. Each Engine Valve is packed in individual box. ....
Select
A. Origin: Taiwan.
B. Brand: catamaron.
C. Product description:
(1) Threaded end, reduced bore, 1-pc, ball valve 1000wog, SS316/DIN
1.4408.
(2) Threaded end, full bore, 2-pcs, ball valve, 1000wog,SS316/DIN 1.4408.
(3) Threaded end, full bore, 3-pcs, ball valve, 1000wog,
SS316/DIN1.4408.
(4) Socket-weld end, ....
Select
Our firm Gillson is a professional fitting manufacturer in Taiwan. We are not only offer you fitting but also with various valve assembling service from our factory. Sample is available upon your request. Swing check valve threaded end.
1. Investment casting body.
2. Pressure rating: 200 PSI.
3. Material: CF8M (....
Select
Description:
1. Large capacity at 160 1/min: large pressure at 210 kgf/cm2
2. Dual frequency terminals (50/60Hz).
3. Ann-dust and water proof structure based on IFC. Pub529 lp65. 1. Model coding: TS-G02, TS-G03.
2. Nominal dia: 1/4, 3/8.
3. Maximum operating pressure: 210 kgf/cm².
4. Maximum flow: 100 L/min,....
Select
1. Invisible valves is simple and fashion in appearance without extender.
2. The design without extender can improve the balance of whole tire.
3. Our whole new designed extender Exb-1. Exb-2 can easily remove the cap and inflate. 1. Rim hole: 11.5mm (0.453").
2. Valve core: TR-C1.
3. Stem material: bras....
Select
1. A normal-open solenoids valve.
2. Application: sphygmomanometers... 1. Normal voltage: 6VDC.
2. Air leakage: 3mmHg max/min in a 260mmHg test tank with initially DC3.6V is on. ....
Select
1. Direct Acting
2. Coil: Winding coil with flying leads.
3. Valve's body: Zinc alloy.
4. Normally Closed. 1. Connection: PT 3/8".
2. Orifice: 10mm.
3. Operating pressure: 0-1 kg*f/cm2.
4. Cv Value: 1.7.
5. Max. Temp.: 60 degree C. ....
Select
Since our establishment, we have built technological cooperation with Japan, with products ranging from dual plate & single door wafer type check valve, butterfly valve, globe valve, gate valve, ball valve, swing check valve, swing check, Y-Strainer, as well as specialiized design and manufacturing of all kinds of valv....
Select
1. "317" brand bronze safety relief valve.
2. Specialized in producing various valves and pipe fitting, flanges, boiler parts, and steam accessories.
3. OEM is welcome to request.
4. Provide high quality products with competitive prices and prompt delivery. 1. Screwed end to BS21 (BSPT) or ANSI B2.1....
Select
Two piece stainless steel ball valve, screwed body, full port, 1000 WOG. 1. Thread end: BSPT, NPT, DIN259, DIN2999.
2. Materials:
(1) ASTM A351-CF8M (DIN 1.4408) stainless steel.
(2) ASTM A216-WCB (DIN 1.0619) carbon steel.
3. High quality investment casting body and caps.
4. Pressure temperature rating: 1000....
Select
Manufacturers of faucet, reverse osmosis faucets, drinking water faucet, cock valve ball valve, brass ball valve, butterfly ball valve, butterfly valve, gas valve, bronze safety valve, bronze water gauge valves, needle valves, forged brass needle valve, forged brass needle valve, stainless steel needle valve, safety va....
Select
Accessories are mainly valve hardware, architecture hardware, and marine hardware. Materials are ranged from #304 (1.4301), #316 (1.4401), and carbon steel. We welcome OEM and ODM customers. ....
Select
The use in the fluid flow circuitry or the pressure vessel system, uses for to control, the adjustment rate of fluid flow or the pressure, its function including the impediment or the start fluid flow, the flow control, the flow direction changes, prevents the adverse current, the pressure control or the relief pressur....
Select
1. Material: S45C steel.
2. Finish: by requested.
3. For more product information, please visit our website, or contact us by email for a detailed catalog. 1. OEM/ODM manufactory.
2. Sample or drawing is inquiried.
3. Please visit our web site for more specification information. ....
Select
1. Outside screw and yoke.
2. Bolted bonniet.
3. Flexible wedge, fully guided.
4. Renewable wedge, fully guided.
5. Rising stem and non-risng handwheel.
6. Available with gear operator.
7. Buttwelding ends.
8. Steel gate vales, API600.
9. Steel valves, ANSI B16.34.
10. Face to face, ANSI B16.10.
11. Buttwe....
Select
1. Working pressure: 0-150 PSI.
2. Working temperature: 0-160℃.
3. Testing pressure: body: 25 BAR, seat: 20 BAR. 1. Size : 1/2" to 3".
2. Material : PVC.
3. Socket end : CNS, JIS, BS, ANSI, DIN.
4. Thread end : NPT, BSPT. ....
Select
For mobile and industrial Hydraulic applications, which needs high power for good performance. 1. Available sections from 1 to 12.
2. Choice of various operatoin methods, such as manual, pneumatic, hydraulic, and electro-hydraulic.
3. Choice of various ports and circuit valves.
4. Spring return.
5. Sub-plate mo....
Select
PN 10
1. The flange end conforms to ANSI B 16.5 & DIN 2501 wafer type.
2. Max working temperature: 480℉.
3. Pressing rating ANSI 150. DN50 DN65 DN80 DN100 DN125 DN150 DN200 DN250
NPS2" NPS2-1/2" NPS3" NPS4" NPS5" NPS6" NPS8" NPS10" ....