The Spec Of Valve Parts : 1. Teflon industrial coating: our two factories are all Dupont LIA ( Licensee Industrial Application ) and ISO 9001 certificated.
2. Halar coating for stainless steel ducts for semiconductor industry: FM 4922 approved.
3. Conveyorized oven coating: using various paints contain fluoropolymer and silicon for mass qu....
The Spec Of Valve Parts : Ball for Valve in stainless steel (custom-made). We can produce any sizes and styles as your request. ....
The Spec Of Valve Parts : 1. Sotek Technology Co., Ltd., a company endeavors to be perfect on quality, service, competition, and responsibility, spinning off in 2004 from Soartek Co., Ltd. (established in 1989), now managed by Mr. Sunny Liu.
2. Mr. Liu believes quality is the only and the best way to compete and survive. This goal has stimulat....
The Spec Of Valve Parts : Traditional valve extension in 25mm, 38mm, 50mm, 60mm, 70mm, 100mm Traditional valve extension in 25mm, 38mm, 50mm, 60mm, 70mm, 100mm
special after market package is also available upon request. ....
The Spec Of Valve Parts : Request for custom-made balls of all stianless steel materials, sizes and tolerances are welcome. 1. Size: 1"~ 4".
2. O.D.: 30mm ~ 170mm.
3. I.D.: 12mm ~ 100mm.
4. Material: 316/ CF8M/ 1.4408/ SCS14/ 304/ CF8/ 1.4301/ SCS13. ....
The Spec Of Valve Parts : 1. OEM & ODM are welcome.
2. Our firm Gillson are not only offer you fitting but also with various valve assembling service from our factory. 1. The handle lever will depend on your drawing and size are unlimited......our pressing factory will based on your request to offer you.
2. Dimension are from DN10 ~100 ....
The Spec Of Valve Parts : Plastic tools. 1 1/2". ....
The Spec Of Valve Parts : We are currently supplied our stainless steel balls to our valuable clients in Italy, Germany, United Kingdom, Spain, France, USA, India, Austria, South Africa, Korea, China, etc. 1. Cutstomers' oem or drawings are much welcome.
2. Size: 1/4"-12" (outside diameter from 6mm upto 500mm). ....
The Spec Of Valve Parts : Valve, flange, check valve. JIS10K, ID: 3mm, OD: 250mm. ....
The Spec Of Valve Parts : The use in the fluid flow circuitry or the pressure vessel system, uses for to control, the adjustment rate of fluid flow or the pressure, its function including the impediment or the start fluid flow, the flow control, the flow direction changes, prevents the adverse current, the pressure control or the relief pressur....
The Spec Of Valve Parts : 1. Design flexibility: Investment casting produces near-net-shape configurations, offering designers and engineers freedom of design in a wide range of alloys. The process is capable of producing precise detail dimensional accuracy, and parts may weigh just a few ounces to many pounds.
2. Wide choice of alloys: Avail....
The Spec Of Valve Parts : Material: ASTM-A351-CF8M, ASTM-A351-CF8, ASTM-A217-CA15, DIN 1.4408, DIN 1.4404, DIN 1.4409, DIN 1.4308, DIN 1.4027, AISI 316, AISI 304. 1. Size: OD 10mm-520mm.
2. Solid ball & hollow balls (with or without pipe).
3. Made by: investment casting, sand casting, bar stock, centrifugal casting, forged casting, pipe ....
The Spec Of Valve Parts : RMC was found in 1993, specialize in manufacturing precision control valve parts . 1. Material: 6061-T6.
2. Control valve parts customized. ....
The Spec Of Valve Parts : 1. Material: stainless steel, carbon steel, special alloy, nickel base.
2. Various machining and surface finish. 1. Custom design.
2. OEM is welcome. ....
The Spec Of Valve Parts : We are not only an automobile parts manufacturer, but also a professional investment casting manufacturer in other range of casting parts such as golf heads, architectural accessories, pipe fittings, etc.. We are an ISO 9001:2008 and ISO 14001:2004 certified investment casting company. Our precision casting parts are ....
The Spec Of Valve Parts : 1. OEM & ODM are welcome.
2. Our firm Gillson are not only offer you fitting but also with various valve assembling service from our factory. 1. The valve holder (turn head) will depend on your drawing and size are unlimited.. our foundry will based on your request to offer you.
2. Dimension are from DN25 ~100 (....
The Spec Of Valve Parts : 1. OEM & ODM are welcome.
2. Our firm Gillson are not only offer you fitting but also with various valve assembling service from our factory.
3. Drive adaptor or stem. 1. DN25 ~ DN100 (1"~4").
2. Made by bar in material 304 or 316 and carbon steel also are available upon your request. ....
The Spec Of Valve Parts : Clamp fittings, butt welding fittings, union, elbow 90, elbw 45, cross, reducer. 1. Dimension conform to BS, 3A, IDF, RJT, DIN, SMS standard.
2. Material: AISI 304/ 316/ 316L.
3. Size: 1"~4". ....
The Spec Of Valve Parts : valve extension in 30mm, 40mm, 50mm, 60mm, 70mm
screw the extender on first than the valve valve extension in 30mm, 40mm, 50mm, 60mm, 70mm
screw the extender on first than the valve
special after market package is also available upon request. ....
The Spec Of Valve Parts : Plastic tools. 1 1/4". ....
The Spec Of Valve Parts : We supply our best quality products and on time delivery to meet your requirement. We offer customized products to meet customers' requirements. ....
The Spec Of Valve Parts : Request for custom-made balls of all stainless steel materials, sizes and tolerances are welcome. 1. Size: 1" ~ 6".
2. O.D: 30mm ~ 170mm.
3. I.D: 12mm ~ 100mm.
4. Material: 316/ CF8M/ 1.4408/ SCS14/ 304/ CF8/ 1.4301/ SCS13. ....
The Spec Of Valve Parts : 1. Design flexibility: investment casting produces near-net-shape configurations, offering designers and engineers freedom of design in a wide range of alloys. The process is capable of producing precise detail dimensional accuracy, and parts may weigh just a few ounces to many pounds.
2. Wide choice of alloys: avail....
The Spec Of Valve Parts : Precision casting by Kinfuren Industrial Co., Ltd. allows the production of parts utilizing a variety of metal alloys for the creation of very simple to highly complex metal shapes. We are also an ISO 9001:2008 and ISO 14001:2004 certified investment casting company. We produce casting parts ranging from 10 gram to 20....
The Spec Of Valve Parts : Our company has specialized technologies and expertise in automobile parts, architectural hardware, food machinery parts, valve & pipe fittings, etc. We are a professional casting manufacturer, and have been in this industry since 1994. We are also an ISO 9001:2008 and ISO 14001:2004 certified investment casting compa....
The Spec Of Valve Parts : 1. OEM & ODM are welcome.
2. Our firm Gillson are not only offer you fitting but also with various valve assembling service from our factory. Our ISO bracket dimension are available from F3 ~ F16, and our pressing factory can also based on your drawing to offer you.
Bracket material with stainless steel 304 grade....
The Spec Of Valve Parts : 1. OEM & ODM are welcome.
2. Our firm Gillson are not only offer you fitting but also with various valve assembling service from our factory. DN25 ~ DN100 (1" ~ 4"). ....
The Spec Of Valve Parts : 1. OEM & ODM are welcome.
2. Our firm Gillson are not only offer you fitting but also with various valve assembling service from our factory. 1. DN10~DN300( 3/8" ~ 12").
2. Lost wax casting in 304(CF8) or 316(CF8M) are avaialbe and upon your request.
3. L & T port or X port design or can depend on your....
