The Spec Of Valve Pipe Fitting Manufacturers : Honing seamless steel pipes produced by undergo cold forcing and annealing for a cured tensile strength reaching over 52kg/cm2, before the pipes are milled by precision machinery, regulation the tolerance in inner diameter at an H8-H9 level, with surface roughness at between Ra 0.2 μm~0.8μm, which helps to extend the....
The Spec Of Valve Pipe Fitting Manufacturers : Design description:
(1) Y-pattern.
(2) Bolted cover with drain plug.
(3) Perforated stainless steel screen.
(4) Available with 40 - 200 mesh screen.
The Spec Of Valve Pipe Fitting Manufacturers : Our firm Gillson is a professional fitting manufacturer in Taiwan. We are not only offer you fitting but also with various valve assembling service from our factory. Sample is available upon your request.
The Spec Of Valve Pipe Fitting Manufacturers : 1. Direct Acting
2. Coil: Winding coil with flying leads.
3. Valve's body: Zinc alloy.
4. Normally Closed.
The Spec Of Valve Pipe Fitting Manufacturers : 1. Y-type strainer.
2. Investment casting.
3. SS 316 screen.
4. Screwed-in cap.
5. Working pressure: 800 PSI.
6. End connection: female threaded ends.
The Spec Of Valve Pipe Fitting Manufacturers : 1. We are a professional manufacture in Hardware about 30 years. We also develop and produce drinking water faucet, safety valves, water gauge valves, fittings, etc. With high technical machinery equipment and experienced staff. We obtained the ISO 9001: 2008NSF certificate.
2. Supplying high quality with reasonable p....
The Spec Of Valve Pipe Fitting Manufacturers : Compact (wafer) type flanged ball valve:
1. 150 LBS, PN 16, PN 40, full bore.
2. Flange dimensions: DIN 2633-PN16. DIN 2635-PN40. ANSI 150 LBS.
3. Material:
(1) Astm a351-cf8m (din 1.4408) stainless steel.
(2) Astm a216-wcb(din 1.0619) carbon steel.
The Spec Of Valve Pipe Fitting Manufacturers : 1. Product name: ear clamp.
2. Model number: ear clamp.
3. Place of origin: China.
The Spec Of Valve Pipe Fitting Manufacturers : Two piece stainless steel ball valve, screwed body, full port, 1000 WOG.
The Spec Of Valve Pipe Fitting Manufacturers : 1. Forged high pressure pipe fittings: 90 degree elbows.
2. Socket weld.
3. 3000-6000-9000 lbs.
The Spec Of Valve Pipe Fitting Manufacturers : Since our establishment, we have built technological cooperation with Japan, with products ranging from dual plate & single door wafer type check valve, butterfly valve, globe valve, gate valve, ball valve, swing check valve, swing check, Y-Strainer, as well as specialiized design and manufacturing of all kinds of valv....
The Spec Of Valve Pipe Fitting Manufacturers : 1. Working pressure: 0-150 PSI.
2. Working temperature: 0-160℃.
3. Testing pressure: body: 25 BAR, seat: 20 BAR.
The Spec Of Valve Pipe Fitting Manufacturers : Elbow LR & SR, 90: long radius or short radius.
1. Material spec: ASTM A403, A240, A312, A234.
2. Material Grades: 304, 304L, 316, 316L, CARBON STEEL.
3. Sizes: 1/2" - 48".
The Spec Of Valve Pipe Fitting Manufacturers : JF-150 Omega Expansion Joint is newly developed product, it can distribute the stress within material over everywhere of bellows averagely, so is extremely effective to absorb the expansion or contraction of pipelines.
The Spec Of Valve Pipe Fitting Manufacturers : 1. Material is copper.
2. Formed with 3 simultaneous planes to resist distortion. Inside radius will be maintained even when bent into a small arc, keeping the flow rate at maximum.
The Spec Of Valve Pipe Fitting Manufacturers : Bueno PTFE/PFA lined pipes are designed with safety and longevity in mind; they are lined with PTFE/PFA of adequate thickness, which prevents possible permeation and corrsion from damaging the metal pipe.
The Spec Of Valve Pipe Fitting Manufacturers : 1. Product name: adapters.
2. Brass fitting.
The Spec Of Valve Pipe Fitting Manufacturers : Custom-made of different colors and specifications.
The Spec Of Valve Pipe Fitting Manufacturers : Designing and manufacturing for all kinds of plastic injection parts such as plastic and rubber parts for engines, plastic and rubber parts for pneumatic tools.
The Spec Of Valve Pipe Fitting Manufacturers : 1. Smooth outer wall, no blisters, cracks, peels and obvious marks, in even color.
2. Various casting products.
3. Refined surface.
The Spec Of Valve Pipe Fitting Manufacturers : To enhance the use of HDPE pipe to their optimum state, the pipe have to be collocated with PE fitting. We have three kinds of fitting.
The Spec Of Valve Pipe Fitting Manufacturers : The kind of tubing produced with the process of thermal and vulcanization is the non-alkali fiberglass braided silicone rubber tubing. This tubing possesses good qualities of dielectric high temperature resistance and cold resistance and can be use as wiring insulator for H grade electrical machinery, special bulbs, el....
The Spec Of Valve Pipe Fitting Manufacturers : 4-Way reversing valves
The Spec Of Valve Pipe Fitting Manufacturers : Brass ball valve.
The Spec Of Valve Pipe Fitting Manufacturers : 1. Direct type relief valve.
2. Pilot operated relief valve.
3. Low noise type pilot operated relief valve.
4. Solenoid control relief valve.
5. Sequence valve.
6. Counterbalance valve.
7. Pressure switch.
8. Back pressure control valve.
9. Logic valve.
The Spec Of Valve Pipe Fitting Manufacturers : 1. Alloy copper with very high crystal density.
2. Casting without offset.
3. Less reprocessing needed.
4. Homogeneous material.
5. High pressure resistance.
6. Wear resistance over sand casting 5%-10%.
The Spec Of Valve Pipe Fitting Manufacturers : 1. Ductile iron housings with EPDM all weather gasket, max. working temp.
2. 250°F. with grade 5 heat-treated bolts and heavy duty nuts.
The Spec Of Valve Pipe Fitting Manufacturers : 1. Complex and precise casting elements are easy to produce.
2. Casting element has fine surface and solid content.
3. Reduced machining and defects, saving your money.
4. Options on the material, fast and mass production.
5. Precise, easy to design.
The Spec Of Valve Pipe Fitting Manufacturers : 1. Reduce port, 1/4"~2" (DN8~DN50).
2. W.P.: 1000WOG (PN63).
3. W.T.: -20℃~200℃(-4℉~392℉).
4. Investment casting.
5. Blow-out proof stem.
6. Anti-static device (option).
7. Lock device handle.
8. Body: CF8M/WCB (EN1.4408/EN1.0619).
9. Ball: SS 316.
10. Stem: SS 316.
11. Seat: PTFE/RTFE.
12.....
The Spec Of Valve Pipe Fitting Manufacturers : One piece stainless steel ball valve:
1. For chemical and industrial applications.
2. 100% tested air-under water at 100 PSI (6 Bars) open & close position.
