Select
The Spec Of Measuring Equipments : 1. Product name: inspection machine.
2. Easy feeding and removing of materials. 1. Machine speed: 200 m/min.
2. Inspection width: 1000/ 1200mm.
3. Maximum unwinder / rewinder dia.: 800 mm. ....
Select
The Spec Of Measuring Equipments : 2. Networking assemblies / cable tester.
2. High quality. Test BNC and UTP. ....
Select
The Spec Of Measuring Equipments : 1. Length, area and volume measurements.
2. Data computation, storage and data recall.
3. Conversion unit among feet, inches and meter.
4. Laser acts as a sight to indicate measuring area.
5. With CE and RoHS approvals. Instantly measures interior room dimensions from 2 to 50 feet (0.6 to 15m). ....
Select
The Spec Of Measuring Equipments : 1. Plunger: high carbon steel with rhodium plated or gold plate.
2. Spring: music wire with gold plated.
3. Receptacle with terminal wire.
4. Barrel: phosphor bronze with gold plate.
5. Receptacle: phosphor bronze with gold plate.
6. P series test probes. 1. Min. center: 0.50mm [0.0197 inch].
2. Full strock:....
Select
The Spec Of Measuring Equipments : 1. Data hold.
2. Auto power off selection.
3. Capacitance measurement.
4. Auto range & manual range.
5. Hz/Duty measurement.
6. High accuracy.
7. Relative measurement. 1. Clamp size:ψ40mm or 10 x 47mm.
2. LCD display:3 3/4 digits LCD with 4000 counts.
3. Sampling reading rate: 3 times I sec. approx.
4. Ra....
Select
The Spec Of Measuring Equipments : 1. Tester port: Tester RJ45 Master port (M), tester LOOPBACK RJ45 port (L), far-end recognizer RJ45 port( R). The extra NBC and RJ11 converters are used to measure and check continuity of coaxial cable and telephone line.
2. Length measurement of twin twisted cable:
(1) Scope: 1350M (31,200ft).
(2) Calibration acc....
Select
The Spec Of Measuring Equipments : 1. Output power: class II<1mW, class IIIA<5Mw.
2. Continuous usage: 3 hours. 1. Dimension (L x W x H): 145.5x57x19mm.
2. Weight (batteries and packaging included.): 250g.
3. Wavelength: 645-660nM.
4. Battery: 1.5V "#5"x2pcs. ....
Select
The Spec Of Measuring Equipments : 1. Capacity: 100kg.
2. Testing stroke: 70mm.
3. Accuracy: 0.2% FS.
4. Measuring unit: KG. LB. N.
5. LxWxH: 57x25x50cm. We can produce any sizes and styles as your requests, welcome OEM & ODM. ....
Select
The Spec Of Measuring Equipments : 1. These parallel-jaw bar clamps are valued for quick, accurateclamping of panels, carcasses and frameworks.
2. The end stop on the steel bar helps stabilize the clamp during use and detaches to resverse the screw jaw for spreading purposes.
3. The comfortable screw handle is compound material. 1. There are over ....
Select
The Spec Of Measuring Equipments : Material of case, cover, and part of connection. 1. Material of sensitive stem: SUS304(#316 also available).
2. Dial scale plate: Alumimum-white background with black figures & marks.
3. Temperaure range: -50~+600oC.
4. Outside dia. of stem: Normal 6.3mm, Max. 4~12mm by orders.
5. Length of stem: 2"~25&quo....
Select
The Spec Of Measuring Equipments : 1. SM-PX shotmatic-controller precision.
2. Build-in digitals timer can make turner adjustment and high shot volume repeatable.
3. The communication signal terminal enables this dispenser to integrate into variety of automated manufacturing equipments.
4. With suck-back vacuum transducer and suitable for low to high....
Select
The Spec Of Measuring Equipments : Pressure Gauge is all hand made, which requires delicate technique to maintain it's accuracy. It also has different fitting for your choice, like DU, BT, AT and ect. Each pressure gauge is packed in individual box. ....
Select
The Spec Of Measuring Equipments : 1. Induct the current UV intensity in 3 seconds.
2. LCD display.
3. With 8 levels (1-8).
4. Display the current temperature( ℃/ ℉). 1. Unit size: 8.5 x 5.5 x 0.4cm.
2. Box size: 18.5 x 10.3 x 0.6cm.
3. Carton size: 30.5 x 27.5 x 31cm.
4. Number of pieces per carton: 360.
5. Gross weight: 15.2.
6. N....
Select
The Spec Of Measuring Equipments : Specifications:
1. Dial diameter: 2 inch.
2. Pressure range: 0~60psi or 0~100psi or 0~160psi.
3. Housing: black-painted steel.
4. Ring: none.
5. Lens: acrylic.
6. Stem with release button & straight chuck.
7. Handy series. Packing detail:
1. Q'TY: 48 pcs.
2. N.W: 8.64 kgs.
3. G.W: 11.60 kgs.
4. CUFT....
Select
The Spec Of Measuring Equipments : L20 Dummy Load. 1. Frequency: DC~500 MHz.
2. Max power: 15 Watts.
3. V.S.W.R.: ≦ 1.5.
4. Connector: UHF Male. ....
Select
The Spec Of Measuring Equipments : 1. Product name: professional lumen box.
2. Luminous intensity: 700 - 13000 cd/m2.
3. Model: BOX-8060. 1. Transmitted light square: 800 x 600.
2. Color temperature: 5000 K. ....
Select
The Spec Of Measuring Equipments : Manufacturer of electrical panel control components, industrial plugs & sockets, AC solenoid, buzzer, temperature controller, time switch meter and emergency lights. Electrical panel control components supplier and manufacturer from Taiwan and China. ....
Select
The Spec Of Measuring Equipments : 1. Primary competitive advantages: competitive prices, small order acceptable.
2. Sales method: export, manufacture.
3. Payment term: T/T. 1. CFM-2GPM.
2. CFM-2GPM-S.
3. CFM-2GPM-R.
4. CFM-LED.
5. CFM-8000T.
6. CFM-6000R. ....
Select
The Spec Of Measuring Equipments : S-B57L Vertical Air Tester is specially designed for big round can. With special detection elements to get an excellent detecting performance, even small pinhole can be detected easily. Empty can is lifted up by air cylinder to let a plug enter can to occupy some can inside volume then fill compressed air into can. Cer....
Select
The Spec Of Measuring Equipments : 1. Keyboard operating, wide range, high accuracy.
2. A complete digital design for speed measuring, general industrial maintenance, quality control, production, laboratories and for schools and colleges for demonstrating strobe action.
3. Three complete setup memory.
4. Special function "×2" and "÷2....
Select
The Spec Of Measuring Equipments : 1. Advanced servohydraulic technology: EKTRON servohydraulic test system meets the broadest range of dynamic material testing needs. This system offers better control and reliability at higher testing frequencies than electromechanical or pneumatic equipment.
2. High measuring precision: high performance hydraulic ac....
Select
The Spec Of Measuring Equipments : 1. MIT type folding endurance tester.
2. This machine is to test the folding endurance of Metal foil, paper card board, will go through bending (or similar) motion, if material cannot pass through this bending test, will affect the quality of product. 1. Testing load: 100 ~ 1500g.
2. Bending angle: Left and right....
Select
The Spec Of Measuring Equipments : Satrue's pocket scales are designed for high precision, high accuracy measurement. 1. Capacity: SDM-1020E: 50g x 0.005g; SDM-1020: 20g (0.001g/under 10g; 0.002g/above 10g).
2. CE approval.
3. Display: G, OZ, DWT & CT.
4. Unique hand-held design.
5. Energy-saving auto shut-off.
6. Indication low-battery voltage....
Select
The Spec Of Measuring Equipments : 1. All-in-one network tester / tone generator / pin-by-pin cable tester.
2. Flashes the network hub/NIC port light of the cable tested to identify port number.
3. Remote unit included for testing already-installed cables.
4. Coaxial F adaptor included for testing coaxial cables.
5. Built-in tone generator helps....
Select
The Spec Of Measuring Equipments : 1. SMT application.
2. Display: 1999 counts. digit is 11mm high.
3. DC voltage: 600V1.0%.
4. AC voltage: 600V1.5%.
5. AC current: 2A/20A/200A2.0%.
6. Max. diameter for conductor: O 28mm. 1. Resistance: 2K+1.0%.
2. Data hold. ....
Select
The Spec Of Measuring Equipments : 1. Features:
(1) Based on OTDR technology.
(2) Designed to determine the fiber length or fault location.
(3) Palm-sized & portable.
(4) Easy to operate by only one touch.
(5) Measure for up to 30km with up to 5 fault events.
(6) Additional visible light (VFL) 650nm available to locate fiber distribution and test....
Select
The Spec Of Measuring Equipments : 1. G20 series gauges are used to monitor pressure of regulators and systems.
2. 2" gauge are available in 316 stainless steel, all gauges have 1/4 NPT male bottom connection and an accuracy of 20% of full scale. Scale ranges (psi/ bar):
1. 0-30.
2. 0-60.
3. 0-100.
4. 0-160.
5. 0-200.
6. 0-300.
7. 0-600....
Select
The Spec Of Measuring Equipments : 1. With data feedback, programmable force, speed & position.
2. Car-stereo panel test:
(1) Touch the surface with a force as little as required.
(2) Learn initial position.
(3) Push all the way down and determine click point & extreme position.
(4) Measure minimum force needed to switch.
(5) Pull up and measur....
Select
The Spec Of Measuring Equipments : Product name: 8901 remote vane thermo - anemometer. 1. Temp. range: -10°c to 50°c ( +14°F ~ 122°F ).
2. Airflow ranges: 80~6900 ft/min. ....
Select
The Spec Of Measuring Equipments : 1. High efficiency, high precision counter and packer.
2. Alarm of signal and buzzor will be on when shortage of materials bag not properly opened, sealed or jammed, etc. And machine will be off automatically.
3. Print unit and optic fiber sensors.
4. Open sewing line.
5. Finish pack conveyor.
6. Bags total cou....