The Spec Of Plastic Forming Machines : 1. Suitable material: PVC.
2. Screw dia.: 100 mm, 20 mm, 150 mm.
3. L/d ratio: 1:24.
4. Thermo-controller of feeding pipe: 5 sets, 7 sets, 9 sets.
5. Heating capacity: 12 kw, 18 kw, 27 kw.
6. Cooling power: 1/4 hpx 4, 1/4 hpx 6, 1/4 hpx 8.
7. Die cutting power: 3 hp. 1. Control style: by inverter. 2. Heat....
The Spec Of Plastic Forming Machines : For EVA foam,PVC and rubber,strip cutting or side cutting. 1. Working width: 2M.
2. Power: 3hp.
3. Working thickness: 10-50mm.
4. Productivity / hour: 1000M.
5. Mechanical size cm: 240x80x140.
6. Mechanical weight: 960kgs.
7. Number of blade: 8.
8. Blade dimenion: 200m/m. ....
The Spec Of Plastic Forming Machines : 1. Produce shrinkable PVC film for labels, goods packaging etc.
2. Hot water chamber & cooling size ring help to get a glossier, and non-wrinkle film.
3. Machine direction shrink ratio and transverse shrink ratio can be adjusted easily. Machine direction shrink ratio can be 2-5 %.
4. We didn't show all our models, p....
The Spec Of Plastic Forming Machines : 1. Pr - type plastics pelletizer.
2. Kneader machine. 1. Driving motor: 7.5 HP.
2. Single screw l / d ratio: 10 : 1.
3. Extruding capac: 300 - 450 Kgs / Hr.
4. Driving motor: 30 HP AC.
5. Heater capacity:10 KW.
6. Temperature control panel: 6 Zones.
7. Cutter die: hot cutter.
8. Driving motor: 1HP.
....
The Spec Of Plastic Forming Machines : SPC (cup purpose machine):
Material: PS, PP, HIPS, PVC, PET.
Operating flow:
1. Feeder → chain conveyor → heater → forming plate (forming, punching, cutting) → product removing → waste removing.
2. Brief drawing and production flowchart
Optional accessory:
1. Air compressor: 20HP, 15kw.
2. Chiller:
(....
The Spec Of Plastic Forming Machines : •Double cutters for making bottom and T-shirt bags.
•CB2P is equipped with four feeding devices to produce four lines non-printed bags, CB3P is equipped with six feeding devices to produce six lines non-printed bags.
•Equipped with four feeding devices to produce four lines non-printed bags.
•Punch ....
The Spec Of Plastic Forming Machines : •Specialized for T-Shirt bags, with heat cutting for non-tension sealing.
•CT Series is equipped with one feeding device & one photocell, CTT Series has two feeding devices and two photocells for printing bags.
•Machine is automatically stopped if bag is jam or miss the printing mark.
•Punch press i....
The Spec Of Plastic Forming Machines : •Specialized for T-Shirt bags, with heat cutting for non-tension sealing.
•CT Series is equipped with one feeding device & one photocell, CTT Series has two feeding devices and two photocells for printing bags.
•Machine is automatically stopped if bag is jam or miss the printing mark.
•Punch press i....
The Spec Of Plastic Forming Machines : •Specialized for producing T-Shirt bags with heat cutting for non-tension sealing.
•CTP Series is equipped with one feeding devices & one printing mark photocell, CTTP Series has two feeding devices and two printing mark sensor.
•Machine is automatically stopped if a bag is jam or miss the printing mark.
....
The Spec Of Plastic Forming Machines : •Designed to produce disposable gloves for food handle or any bag with irregular shape.
•Can be two molds to have more production.
•Without photocell
•Purchasing optional double cutter, conveyor & heat needle devices can produce flat bags in the same machine to let the machine have several functions....
The Spec Of Plastic Forming Machines : •Designed to produce dotted T-shirt bags.
•A puncher is in-line with dotting machine to automatic punch the T-shirt shape.
•Equipped with one printing mark photocell.
•Easy tear off without breaking.
•Optional servo motor for better length adjustment & easier operation.
•We didn't show a....
The Spec Of Plastic Forming Machines : Coarsening rubber sole of working shose or any-kind,one by one to make suface roughing ready for gluing. 1. Working width 250mm. 2. Power: 10HP. 3. Working thickness: 3-80mm. 4. Mechanical size: 350x80x120cm. 5. Mechanical weight: 1600kgs. ....
The Spec Of Plastic Forming Machines : Welding and joining EVA, PE, Sponge sheets into roll by hermoeletric heat. 1. Use thermoelectric heat welding and joining,doesn't need to use glue any kind of adhesives.(ebvironment safe)
2. Motorized cutting front,rear and both side protion of material,and welding at once.Save time and increase the productivity.
....
The Spec Of Plastic Forming Machines : EVA laminating specially used in building-up the EVA sole of beach shoes,EVA high-heels,sandals and slippers, ect... 1. Thermoelectric welding and bond two material.(whole pocess within 2 minuties).
2. No need to use glue or any dind of adhesives.(environment safe)
3. Welding three pieces 100mm width EVA strip at....
The Spec Of Plastic Forming Machines : Laminating EVA+EVE,EVA+film,EVA+carpet,EVA+surface pattern conve Model: HC-368 / HC-368C.
1. Working width: 1550mm / 1550mm.
2. Horse power: 1 1/4HP / 2HP.
3. Electric power: 13.55kw / 13.55kw.
4. Productivity / Hour: 420M (Reference) / 420M (Reference).
5. Machine size: 220x130x200cm / 230x150x260c....
The Spec Of Plastic Forming Machines : COOL down to room temperature about 30 ¡æ
(After mixing and rollers material temperature about 120 ¡æ). 1. Cooling roller Width: 38" / 50".
2. Cutter working width: 850 / 1150mm.
3. Power: 6hp.
4. Productivity / hour: depending on the speed of mixing roller.
5. Slicing thickness: 1-10mm.
6.....
The Spec Of Plastic Forming Machines : Coarsening the surfaces of rubber sheets, conveyers, EVA foam plates, ect. 1. Working width: 48"(1200mm).
2. Power: 17.5HP.
3. Working thickness: 3-80mm.
4. Productivity / hour: 900M.
5. Mechanical size: 170x110x150cm.
6. Mechanical weight: 1500kgs. ....
The Spec Of Plastic Forming Machines : Feed roller driving by gear-box,motorized height adjustment of upper feeding roller. 1. Change band-knife without tearing down the comer of band-knife fixed table.
2. Splitting and sharpen blade with out water. ....
The Spec Of Plastic Forming Machines : Automatic band-knife adjustment: the front edge position of the blade is monitored by an electric sensor and automatically moved foreard to maintain the correct position as the blade gets Narrower through grinding. 1. Automatic band-knife adjustment:
2. The front edge podition of the blade is monitored by An elect....
The Spec Of Plastic Forming Machines : 1. Motorized height sdjustment of upper feeding roller.
2. Feed roller driving by T-verger.
3. Converyor belt feeding.
4. Automatic lubrication.
5. Knife add air device. 1. Change band-knife without tearing down the comer of band-knife fixed table.
2. Splitting and sharpen blade with out water. ....
The Spec Of Plastic Forming Machines : Changeable patterm roller. 1. Change band-knife without tearing down the comer of band-knife fixed table.
2. Splitting and sharpen blade with out water. ....
The Spec Of Plastic Forming Machines : 1. Firendly PLC inter-face, computer touch screes. Easy to poerate.
2. Thickness controlled and re-located by PLC.
3. The position of blade controlled and re-located by PLC.
4. Automatic sliced piece counting function.
5. Dusty collector for blade sharpener.
6. Close tolerance: +/- 0.1mm (When starting with level....
The Spec Of Plastic Forming Machines : Splitting sole of sports shoes, beach shoes, slippers. 1. Working width: 500mm(20").
2. Total horse power: 5HP.
3. Productivity per hour: 360~1400M.
4. Splitting thickness: 3~50mm.
5. Splitting hardness: 30~60. ....
The Spec Of Plastic Forming Machines : 1. Screw l/d ratio: 20 : 1.
2. Extruding caracity: 100-150 kgs / hr.
3. Driving motor: 30 HP AC. 1. Heatter capacity: 16 kw.
2. Temperature control panel: 5 zones.
3. Machine weight(approx): 4,500 kgs.
4. Dimensions(approx)mm: 4000 x 1800 x 2500. ....
The Spec Of Plastic Forming Machines : 1. Screw l/d ratio: 24 : 1.
2. Extruding caracity: 100-120 Kgs / Hr.
3. Driving motor: 60 HP V.S. 1. Heatter capacity: 32 KW.
2. Temperature control panel: 10 zones.
3. Heater capacity: 40 KW.
4. Take-off motor: 3 HP.
5. Conveyor motor: 1/2HP.
6. Machine weight (approx): 10,000 KGS.
7. Dimensions(ap....
The Spec Of Plastic Forming Machines : PVC soft pellet peproducing machine. 1. Screw l/d ratio: 20 : 1.
2. Extruding caracity: 200-250 Kgs / Hr.
3. Driving motor: 75 HP AC.
4. Heatter capacity: 30 KW.
5. Temperature control panel: 6 ZONES.
6. Machine weight(approx): 9,000 KGS.
7. Dimensions(approx)mm: 6000 x 2500 x 2500. ....
The Spec Of Plastic Forming Machines : Vent-type plastic pellet reproducing machine. 1. Screw l/d ratio: 20: 1.
2. Extruding caracity: 120-200 Kgs / Hr.
3. Driving motor: 40 HP AC.
4. Heatter capacity: 20 KW.
5. Temperature control panel: 6 ZONES.
6. Machine weight(approx): 6,500 KGS.
7. Dimensions(approx)mm: 5000 x 2000 x 2500. ....
