The Spec Of Plastic Mixers & Plastic Blenders : 1. Mode: SM-90WPR, SM-100WPR, SM-120WPR, SM-150WPR.
2. Screw conveyor:
(1) Power: 3HP, 3HP, 3HP, 3HP.
(2) Size: 8'Φ x 3.2m, 8'Φ x 3.2m, 8'Φ x 3.2m, 8'Φ x 3.2m.
3. Main extruder:
(1) L/D ratio: 28:1, 28:1, 30:1, 32:1.
(2) Main power: 30HP AC, 40HP AC, 60HP AC, 75HP AC.
(3) Temp. control: 5 zones, 6 zo....
The Spec Of Plastic Mixers & Plastic Blenders : 1. PVC high speed hot & cooling mixer.
2. Two stage mixing design, first stage is high speed for hot mixing, till reach setting temperature. Then discharge to cooling mixer automatically.
3. Plastic extrusion machine.
The Spec Of Plastic Mixers & Plastic Blenders : 1. Suitable for mixing and blending granular or powder materials.
2. Suitable for pre-mixing or after-mixing of extruding and injection operation.
3. Suitable for mixing and blending the foodstuff or the farinose chemical.
4. Range of mixing blending weight: 50~1500kgs (custom weight is available).
The Spec Of Plastic Mixers & Plastic Blenders : This maching is more suitable for evenly and rapidly drying, dyeing and blending plastic materials. It is especially good for mixing up powder and granulated particles. Owing to the stainless steel lining and blending tool, it is much simple to operate and clean this machine. Manual set up blending time. Electric plate....
The Spec Of Plastic Mixers & Plastic Blenders : Exclusively used for mixing soft and hard rubber and plastics, and high molecular composite materials.
The Spec Of Plastic Mixers & Plastic Blenders : This machine is more suitable for evenly and rapidly drying, dyeing and blending plastic materials. It is especially good for mixing up powder and granulated particles. Owing to the stainless steel lining and blending tool, it is much simple to operate and clean this machine. Manual set up blending time. Electric plate....
The Spec Of Plastic Mixers & Plastic Blenders : Exclusively used for mixing soft and hard rubber and plastics, and high molecular composite materials.
1. The table has complete equipment. It is easy to install, and can be used to produce immediately except special environments.
2. It is time-saving and rapid on production. The mixing only needs 4 to 8 minutes to f....
The Spec Of Plastic Mixers & Plastic Blenders : Exclusively used for mixing soft and hard rubber and plastics, and high molecular composite materials. Small capacity is save cost for each batch.
1. The table has complete equipment. It is easy to install, and can be used to produce immediately except special environments.
2. It is time-saving and rapid on productio....
The Spec Of Plastic Mixers & Plastic Blenders : Exclusively used for mixing soft and hard rubber and plastics, and high molecular composite materials. Small capacity is save cost for each batch.
1. The table has complete equipment. It is easy to install, and can be used to produce immediately except special environments.
2. It is time-saving and rapid on productio....
The Spec Of Plastic Mixers & Plastic Blenders : 1. Model: SM-90FDC, SM-100FDC, SM-120FDC, SM-150FDC.
2. Granulator:
(1) Model: SM-A15, SM-A15, SM-A20, SM-A25.
(2) Power: 15 HP, 15 HP, 30 HP, 40 HP.
3. Blower: power: 3 HP, 3 HP, 5 HP, 7.5 HP.
4. Screw conveyor:
(1) Power: 3 HP, 3 HP, 3 HP, 3 HP.
(2) Size: 8'Φ x 3.2 m, 8'Φ x 3.2 m, 8'Φ x 3.2 m, 8'Φ x 3.2 ....
The Spec Of Plastic Mixers & Plastic Blenders : Internal surfaces in contact with the material are made of stainless steel.
The Spec Of Plastic Mixers & Plastic Blenders : 1. Model: SM-50M, SM-100M, SM-200M.
2. Power: 3 HP, 5 HP, 3 HP x 2.
3. Handing capacity: 50 kg, 100 kg, 200 - 250 kg.
The Spec Of Plastic Mixers & Plastic Blenders : 1. Model: SM-50M, SM-100M, SM-200M, SM-350M, SM-550M.
2. Power: 3 HP, 5 HP, 3 HP x 2, 5 HP x 2, 7.5 HP x 2.
3. Handing capacity: 50 kgs, 100 kgs, 200 - 250 kgs, 350 - 400 kgs,
550 - 600 kgs.
The Spec Of Plastic Mixers & Plastic Blenders : 1. Suitable for mixing and blending granular or powder materials.
2. Suitable for pre-mixing or after-mixing of extruding and injection operation.
3. Suitable for mixing and blending the foodstuff or the farinose chemical.
4. Range of mixing blending weight: 50~1500kgs (custom weight is available).
The Spec Of Plastic Mixers & Plastic Blenders : 1. Suitable for mixing and blending granular or powder materials.
2. Suitable for pre-mixing or after-mixing of extruding and injection operation.
3. Suitable for mixing and blending the foodstuff or the farinose chemical.
4. Range of mixing blending weight: 50~1500kgs (custom weight is available).
The Spec Of Plastic Mixers & Plastic Blenders : 1. Suitable for mixing and blending granular or powder materials.
2. Suitable for pre-mixing or after-mixing of extruding and injection operation.
3. Suitable for mixing and blending the foodstuff or the farinose chemical.
4. Range of mixing blending weight: 50~1500kgs (custom weight is available).
The Spec Of Plastic Mixers & Plastic Blenders : 1. Suitable for mixing and blending granular or powder materials.
2. Suitable for pre-mixing or after-mixing of extruding and injection operation.
3. Suitable for mixing and blending the foodstuff or the farinose chemical.
4. Range of mixing blending weight: 50~1500kgs (custom weight is available).
The Spec Of Plastic Mixers & Plastic Blenders : 1. Suitable for mixing and blending granular or powder materials.
2. Suitable for pre-mixing or after-mixing of extruding and injection operation.
3. Suitable for mixing and blending the foodstuff or the farinose chemical.
4. Range of mixing blending weight: 50~1500kgs (custom weight is available).
The Spec Of Plastic Mixers & Plastic Blenders : 1. Suitable for mixing and blending granular or powder materials.
2. Suitable for pre-mixing or after-mixing of extruding and injection operation.
3. Suitable for mixing and blending the foodstuff or the farinose chemical.
4. Range of mixing blending weight: 50~1500kgs (custom weight is available).
The Spec Of Plastic Mixers & Plastic Blenders : 1. Suitable for mixing and blending granular or powder materials.
2. Suitable for pre-mixing or after-mixing of extruding and injection operation.
3. Suitable for mixing and blending the foodstuff or the farinose chemical.
4. Range of mixing blending weight: 50~1500kgs (custom weight is available).
The Spec Of Plastic Mixers & Plastic Blenders : 1. Suitable for drying and blending granular or powder materials.
2. Drying up water existed on surface of materials through heat transfer.
3. A drying blender suitable for pre-processing or after-processing of extruding operation.
4. Range of drying blending: 300-1500kgs (custom weight is available).
The Spec Of Plastic Mixers & Plastic Blenders : 1. Suitable for drying and blending granular or powder materials.
2. Drying up water existed on surface of materials through heat transfer.
3. A drying blender suitable for pre-processing or after-processing of extruding operation.
4. Range of drying blending: 300-1500kgs (custom weight is available).
The Spec Of Plastic Mixers & Plastic Blenders : 1. Suitable for drying and blending granular or powder materials.
2. Drying up water existed on surface of materials through heat transfer.
3. A drying blender suitable for pre-processing or after-processing of extruding operation.
4. Range of drying blending: 300-1500kgs (custom weight is available).
The Spec Of Plastic Mixers & Plastic Blenders : 1. Suitable for drying and blending granular or powder materials.
2. Drying up water existed on surface of materials through heat transfer.
3. A drying blender suitable for pre-processing or after-processing of extruding operation.
4. Range of drying blending: 300-1500kgs (custom weight is available).
