The Spec Of Optical Components Manufacturers : We supply our best quality products and on time delivery to you requirement. SUS 304, SUS 303, alloy 6061, alloy 7075. ....
The Spec Of Optical Components Manufacturers : 1. Optical low-pass filters (OLPF) are mainly for high image quality by eliminating screen effect, which was popular in CCD or CMOS array detector image systems. OLPF was designed by crystal birefringence characteristic, and depends on various CCD specification requirements. For high quality demand, crystal would desig....
The Spec Of Optical Components Manufacturers : Patch Cord Molded Type1 ....
The Spec Of Optical Components Manufacturers : 1. IR cut filter can reflect near infrared and with high transmittance in visible wavelength.
2. Usually using on: digital camera, PC / web camera, cell phone camera lens, CCTV lens filters, image equipments and optical devices. 1. Spectral characteristics:
(1) T50%=610-720nm.
(2) Tave>88% @ 420-620nm.
(3) Tav....
The Spec Of Optical Components Manufacturers : MFOC’s optical closure are designed for use with any cable construction (loose buffer tube, central core tube, loose fiber, ribbon), in any environment (aerial, pedestal, buried, hand hole, manhole) and for numerous splice applications (expressed, tap-off, branch and repair). 1. It is suitable for all kind of opt....
The Spec Of Optical Components Manufacturers : The patch cord series are ultra reliable components featuring low insertion and return loss. To provide our customers the best quality products, the series are made to conform to Bellcore standard in term of optical characteristics, mechanical, reliability testing, etc. They suit for CATV & CCTV, fiber optical tele....
The Spec Of Optical Components Manufacturers : Jye Kuano's Fiber Pigtail / Patchcords and ultra reliable devices featuring low insertion loss and back reflection loss. The Fiber Pigtail / Patchcords come with your choice of simplex of duplex cable configurations and various types of pigtailing and connector terminations to meet your requirements. 1. Low inserti....
The Spec Of Optical Components Manufacturers : Metal：stainless steel, copper, aluminum, carbon steel and so on. Thickness：0.005mm, 0.01mm, 0.05mm, 0.10mm - 1.5mm. ....
The Spec Of Optical Components Manufacturers : Low-loss glass fiber optic cable offers almost unlimited bandwidth and unique advantages over all previously developed transmission media. 1. There are two basic groups of fiber optics: single mode and multimode.2. Connector type: FC, ST. SC, LC, MT-RJ, MU, APC.3. Fiber type: PC, SPC, UPS, APC. ....
The Spec Of Optical Components Manufacturers : Lengths: 40 and 60mm (others: 25mm to order). 100pcs a package or 24pcs a package. ....
The Spec Of Optical Components Manufacturers : 1. Clear quartz rod or ceramic rod.
2. One ceramic pin or two ceramic pins available. 1. Length: 40mm.2. In Compliance with Bellcore 326 and TIA/EIA 604 Standard.3. Easy Installation.4. High Precision.5. Low insertion Loss. ....
The Spec Of Optical Components Manufacturers : 1. Simplex or duplex available.
2. In compliance with bellcore 326 and TIA/EIA 604 standard.
3. Easy installation.
4. High precision.
5. Low insertion loss. Application:1. CATV system.2. Telecommunications.3. Optical networks.4. Testing / measurement instruments.5. Fiber to the home. ....
The Spec Of Optical Components Manufacturers : 1. Lens types include plano-concave, plano-convex, biconvex, biconcave, meniscus, cemented, and cylindrical lenses.
2. They could be used on telescope, binoculars, collimator, optical transceiver, magnifier, alignment instrument, scanner, microscope, monitor camera, optical communication facilities, radiometer, and cr....
The Spec Of Optical Components Manufacturers : 1. indows are optical glass with ground and polished faces that are relatively parallel. They are used to isolate two physical environments while allowing light to pass. When selecting windows, you should consider the following: material, transmission, scattering, wave front distortion, parallelism and resistance to c....
The Spec Of Optical Components Manufacturers : 1. COT provides prisms with various type and cemented prisms. The precision achieved 2" for 90° and 10" for 45° angle. Customers could have versatility for different type prism choices with various coating from our ultimate service.
2. The applications of prisms including: binocular, astronomy telescope, b....
The Spec Of Optical Components Manufacturers : 1. Aspheric mirrors and spheric mirrors are suitable for focus adjustment, convergence, and image forming without color aberration. Aspheric and spherical mirror are used for focus adjustment, convergence, image forming with low color aberration. Reflection mirror applications are from laser beam confinement to instrum....
The Spec Of Optical Components Manufacturers : 1. Aspherical and spherical mirror are used for focus adjustment, convergence, project image with low color aberration. Reflection mirror applications are from laser beam confinement to instrument sub-assembly and high performance image. Especially, long focal length reflection mirror conveniently applied to laser beam....
The Spec Of Optical Components Manufacturers : 1. Standard plates are master of mass production for glass lens testing. Usually, the fabrication of these masters is kind of the state of art. COT could provide flat or spherical standard plate with different sizes and shapes. The irregularity reaches one tenthλ.
2. With COT indigenous master fabrication process and....
The Spec Of Optical Components Manufacturers : Flat mirrors are smooth, highly polished, flat surfaces, for reflecting light. The actual reflecting surface is usually a thin coating of silver, aluminum, or other material. Most flat mirrors are coated, and then overcoated a second time to add a level of scratch resistance. Flat mirrors are found in a wide range of o....
The Spec Of Optical Components Manufacturers : A convex mirror, fish eye mirror or diverging mirror, is a curved mirror in which the reflective surface bulges toward the light source. Convex mirrors reflect light outwards, therefore they are not used to focus light. Such mirrors always form a virtual image, since the focus F and the centre of curvature 2F are both ....
The Spec Of Optical Components Manufacturers : A concave mirror, or converging mirror, has a reflecting surface that bulges inward (away from the incident light). Concave mirrors reflect light inward to one focal point, therefore they are used to focus light. Unlike convex mirrors, concave mirrors show different image types depending on the distance between the obj....
The Spec Of Optical Components Manufacturers : Polarizing Cube Beamsplitters split randomly polarized beams into two orthogonal, linearly, polarized compoents. S-polarized light is reflected at a 90 degree angle while P-polarized light is transmitted. Each beamsplitter consists of a pair of precision high tolerance right angle prisms cemented together with a diel....
The Spec Of Optical Components Manufacturers : Cube beamsplitters are constructed by cementing two precision right angle prism together with appropriate interference coating on the hypotenuse surface. The absorption loss to the coating is minimal transmission and reflection approach 50%(average) though output is partially polarized. If polarization sensitivity is....
The Spec Of Optical Components Manufacturers : Non-Polarizing Cube Beamsplitter consists of a pair of precision high tolerance right angle prisms cemented together with a metallic-dielectric coating on the hypotenuse of one of the prisms. The low polarization dependence of the metallic-dielectric coating allows the transmission and reflection for S- and P-polariza....
The Spec Of Optical Components Manufacturers : Dispersive prisms are used to break up light into its constituent spectral colors because the refractive index depends on frequency; the white light entering the prism is a mixture of different frequencies, each of which gets bent slightly differently. Blue light is slowed down more than red light and will therefore be....
The Spec Of Optical Components Manufacturers : Combining an LP filter and an SP filter produces a bandpass (BP) filter. These filters usually have lower transmittance values than SP and LP filters, and block all wavelengths outside a selected interval, which can be wide or narrow, depending on the number of layers of the filter. OEM and ODM are accepted. ....
The Spec Of Optical Components Manufacturers : Color filters are made of glass for maximum permanence, of liquid solutions in cells with transparent faces for flexibility of control, and of dyed gelatin or plastic (usually cellulose acetate) for economy, convenience, and flexibility. The plastic filters are often of satisfactory permanence, but they are sometimes c....
The Spec Of Optical Components Manufacturers : An optical notch filter has a suspension of small absorbing particles which blocks a narrow band of frequencies. The small absorbent particles are suspended as a colloidal system which can either be solid, liquid or gas as host material. The absorbing particles can be incorporated in a solid matrix as a transmission fi....
The Spec Of Optical Components Manufacturers : A shortpass (SP) filter is an optical interference or coloured glass filter that attenuates longer wavelengths and transmits (passes) shorter wavelengths over the active range of the target spectrum (usually the ultraviolet and visible region). In fluorescence microscopy, shortpass filters are frequently employed in di....
The Spec Of Optical Components Manufacturers : A longpass (LP) filter is an optical interference or coloured glass filter that attenuates shorter wavelengths and transmits (passes) longer wavelengths over the active range of the target spectrum (ultraviolet, visible, or infrared). Longpass filters, which can have a very sharp slope (referred to as edge filters), ar....
