The Spec Of Industrial Air Tool : 1. The self-generated sander, independent sanding, no vacuum cleaner is required. The dust can be collected into the dust-collecting bag during operation to keep place clean and save the operator from the air pollution.
2. The item is suitable for following operation:
(1) Vehicle plating: Rough rubbing before mending....
The Spec Of Industrial Air Tool : Faster & Cleaner Metal Cutting.
The Spec Of Industrial Air Tool : 1. Product Introduction
2. Specifications: PC PLASTIC BODY W/4 BITS SCREW DRIVER & 8/10mm WRENCH(PH#2.3, HEX #4, FLAT#7)
3. Material: PC SCREW DRIVER FOR SNOWBOARD, BIKE, AND SKATE BOARD USE. ....
The Spec Of Industrial Air Tool : 1. Save the massive coatings cost, compared to the normal air spray gun can save the about 40% coating quantity.
2. Saving the spray time also can be achieved fast spraying effect.
3. Atomized well, to improve the shortcoming of high pressure airless type spray gun atomize, has fast and high efficiency merit.
The Spec Of Industrial Air Tool : *Product Name: 1/2" Sq. Dr. IMPACT WRENCH (PIN CLUTCH)
*Model: AT-8113-P * Bolt capacity… 5/8" ( 16 mm )* Max torque… 450 ft-lb (62 kg-m, 610 N-m )* Free speed… 7000 r.p.m.* Air consumption (cfm)… 12* Air inlet (PT)… 1/4"* Air pressure… 90 psi* Net weight&he....
The Spec Of Industrial Air Tool : 1. Powerful Output (0.6 HP), the general output as this kinds of tools is around 0.3 HP.
2. The handle is ergonomically designed with good touch feeling and skid-proof effect.
3. Speed could be adjust.
4. 360 degrees adjustable exhaust type design.
5. The handle material characteristics almost unchanged and it coul....
The Spec Of Industrial Air Tool : 1. Neutral position valve for scania trucks.
2. Auto parts manufacture. 1. O.E.M. REF.: KNOR AC-156C.
2. Setting pressure: 9.5 bar. ....
The Spec Of Industrial Air Tool : 1. Capacity: 18L.
2. Suitable for all types of liquid & oil and for use in all kinds of cars, boats, motorcycles, industrial machinery and other equipment.
3. Not available: Canada. 1. Work pressure: 90 psi. 2. Air inlet: 1/4". ....
The Spec Of Industrial Air Tool : We supply our best quality products and on time delivery to meet your requirement. We offer customized products to meet customers’ requirements. ....
The Spec Of Industrial Air Tool : 1. Heavy-duty coil roofing nailer.
2. High performance.
3. Fast, easy loading.
4. Shingle placement guide.
5. Long life carbide steel.
6. Contact parts. 1. Length: 285mm2. Width: 115mm.3. Height: 254mm.4. Weight: 2.55 KG.5. Load capacity: 120 nails.6. Packing: 10/CTN/28.6/2’.7. Min. order q’nty: 20....
The Spec Of Industrial Air Tool : 3/8" pin clutch mechanism air impact wrench. 1. Square drive: 3/8". 2. Cap.bolt size: 1/2",(13mm). 3. Net weight: lbs: 3.23 lbs (1.47kgs). 4. Overall length: 6 1/2" (165mm). 5. Avg.air consumption-5.3 cfm. 6. Air hose (i.d.): 3/8". 7. Air inlet: 1/4" (pt). 8. Free speed: 10.000 rpm.9. ....
The Spec Of Industrial Air Tool : 1. AT-3000: 20 GA., narrow crown stapler.
2. Application:
(1) Drawers.
(2) Paneling.
(3) Flower boxes.
(4) Cabinet work.
(5) Door & window casting.
(6) Book case.
(7) Wooden toys. 1. Length: 250mm (9.84Inch).2. Height: 174mm (6.85Inch).3. Weight: 1.1kgs (2.42Lbs).4. Pressure: 60-100Psi (4-7Kg/cm).5. M....
The Spec Of Industrial Air Tool : 1. Impact wrench.
2. 3/4" drive impact wrench.
3. Aluminum alloy housing.
4. Nickel chrome molybdenum square driver.
5. Variable speed trigger.
6. Side exhaust.
7. Standard & 6" extension anvil is available.
8. General specification:
(1) Free speed: 6500RPM.
(2) Air pressure: 90 PSI recommended.
....
The Spec Of Industrial Air Tool : * Product Name: 1" Super Duty Impact Wrench (Super Hammer)
* Model: KSP-315G-SH-L
* Net Weight: 22.8 lbs (10.3kg)
* Length: 21.7" (550mm) Square Drive: 1" (25.4mm)Bolt Capacity: 1-13/16" (46mm)Free Speed: 4,000 rpm Max.Torque: 2,000 ft-lbs (2,711Nm)Air Inlet: 1/2" Hose Size: 1/2"Air....
The Spec Of Industrial Air Tool : L.V.L.P. gravity feed spray gun with superior atomization and performance, suitable for industrial purpose and car refinishing painting.
Equipped with a 600c.c. gravity cup, a spanner, a cleaning brush and a paint filter.
★Gun Body- is made of aluminum Die-Casting and carefully polished for finest surface treatmen....
The Spec Of Industrial Air Tool : 1. Accepts both wire and plastic sheet conated nails.
2. Powerful, rapid nailing performance.
3. Depth adjustable.
4. Body protectors equipped.
5. Dust cover equipped. 1. Load capacity: 250 to 400 nails.2. weight: 2.2kg/ 4.9lbs3. Dimnensions: 319*130*273mm/ 12-9/16*5-1/8*10/3/4inch4. Nail Length: 65mm/ 2-1/2inc....
The Spec Of Industrial Air Tool : The most powerful industrial air saw for clean, burr-free cuts with standard hacksaw blades in serving a wide range of industries and emergency services where reliability and durability are really matter such as petrochemicals, oil rigs, power stations, public transport facilities, coal mines, fire brigades,etc. 1.....
The Spec Of Industrial Air Tool : Product Feature
*Spray distance:200mm.
*Paint viscosity: 20sec./RV-2.
*Nozzle and needle are made of heat treated material with the character of high hardness, antiwear so as to lengthen in-service life.
The Spec Of Industrial Air Tool : www.gamela.com.tw is our website showing our products of auto air conditioning tools including valve core remover/tool, digital refrigerant scale, thread chaser set, side can tap, charging cylinder, auto A/C flush, pliers, vacuum testing/brake bleeding kit etc. Please contact us by [email protected] for detail infor....
The Spec Of Industrial Air Tool : 1. PW-4809: 1/2" composite air impact wrench, rear exhaust, pin clutch.
2. PW-4811: 1/2" composite air impact wrench, pin hitter.
3. PW-4900: 1/2" composite air impact wrench, forward torque 180NM, torque control. 1. PW-4809: (1) Mini type, real exhaustion, low noise. (2) Bolt Capacity: 28mm. (3....
The Spec Of Industrial Air Tool : Any specificaitons of various air stapler for staples, brad nails, pin or coiled nails we all can provide it to buyers. 1. Made of high quality stainless steel,iron...etc.2. Special specifications can also be produced, according to customers’ requirements. ....
The Spec Of Industrial Air Tool : Air screw driver. 1. Capacity: 5-6 m/m. 2. Speed: 10000 rpm. 3. Total Length: 180mm. 4. Weight: 1.2kg. 5. Recommend Pressure: 6kg/cm2 AV. Air. Consumption: 0.25m3 min. ....
The Spec Of Industrial Air Tool : This product is been used for tanning activities,nail-art, tattoo, as well as the painting application. 1. TN-132 airbrush.
2. Single action.
3. Fluid nozzle : 0.5 mm.
4. Cup capacity: 90 C. C.
5. Cup fix: detachable.
6. Working pressure: 40 psi. ....
The Spec Of Industrial Air Tool : * Side-to-side stroke.
* Special design enable the easiest method of changing the consuming or worn out parts.
* Ideal for filing, lapping and polishing shallow surfaces, deep ribs and parting lines. Will not slip away from sharp edges.
The Spec Of Industrial Air Tool : 1. Non-vacuum only.
2. Oil-free motor designed, use wearproof materials, the motor lifespan can promote more than 2 times.
3. The bearing is dustproof designing, can effectively lengthen bearing lifespan.
4. Durable, lightweight and ergonomic composite design.
5. Lower body position to make stable fit to the work....
The Spec Of Industrial Air Tool : 1. Product description: air screwdriver (lever start shut off model).
2. Country of origin: Taiwan. Product specifications/ features:
1. Standards:
(1) Tightening torque: from 0.1 to 9.5Nm.
(2) Torque control system: stagger rail motion mechanism (one pulse clutch).
(3) Easy to adjust torque.
(4) Air motor sy....
The Spec Of Industrial Air Tool : 1. Operating Air Pressure: 90 psi , 6.3 kg/cm²
2. Packing Pcs/N.W/G.W/Cut (kg): 20/Ctn/18 kg /1.33’
3. Sug. Air Comp. (HP): 2(HP)
The Spec Of Industrial Air Tool : Steel brass. 1/4 male. ....
The Spec Of Industrial Air Tool : Capacity: 1"(25.4 mm).
Max torque: 800 ft-lbs/110 kg-m/1080 Nm. Speed: 4600 rpm.
Mechanism: pin-clutch. ....
The Spec Of Industrial Air Tool : Air riveter. Blind Rivet Setting Capacity: 3/32"(2.4mm) 1/8" (3.2mm) 5/32"(4.0mm)Traction Power(lbs.): 1300Stroke Length: 15mmOperation Alr Prewss(PSI): 85-100Air Inlet: 1/4"Overall Length(m/m): 230Net Weight(kg): 1.2 ....
