The Spec Of Machinery Part and Component : • Recommended for materials that cannot be stretched.
• Journals are mounted on roller bearings fit into each end of the | shaft body
• Allow journals rotate simultaneously and independently of the shaft body. Result in an even, uniform wind.
• Rotation design can fit to leaf, lug type, multi bladder type an....
The Spec Of Machinery Part and Component : A spring loaded point and razor sharp teeth give the turner control over the amount of drive or slip of the turning.
A safety feature for beginner woodturners. (WKV155) 1"(WKV156) 1-1/4" ....
The Spec Of Machinery Part and Component : These chuck heads are specially designed for application in CNC keyless drill chucks. They are designed and manufactured to the highest engineering standards. The female thread inside the short type MORSE TAPER SHANK. Make it possible to be firmly screwed together with CNC TOOL SHANK and becomes and INTEGRAL CNC DRILL ....
The Spec Of Machinery Part and Component : AEA-001---3" / SPRING TYPE / MECHANICAL CHUCK AEA-001---3"SPRING TYPEMECHANICAL CHUCK ....
The Spec Of Machinery Part and Component : AEA-002---6" / SPRING TYPE AEA-002---6" / MECHANICAL CHUCK ....
The Spec Of Machinery Part and Component : AEA-003---3"- / SPRING TYPE / MECHANICAL CHUCK AEA-003---3"-SPRING TYPEMECHANICAL CHUCK ....
The Spec Of Machinery Part and Component : AEG-001 / FRICITION RING - Inner Bearing Type- For paper core - Dimension of Standard Model: OD: 3" (75~79mm) ID: 1.2~2.1"(30~55 mm) Width: 50 mm.- Other size is available for custom-made ....
The Spec Of Machinery Part and Component : AEG-002 / FRICITION RING - Inner Bearing Type - For low friction material, such as steel and plastic. - Dimension of Standard Model: OD: 3" (75~79mm) ID: 1.2~2.1"(30~55 mm) Width: 50 mm.- Other size is available for custom-made ....
The Spec Of Machinery Part and Component : AEG-003 / FRICITION RING- Inner Bearing Type - Inner Bearing Type- For low friction material, such as steel and plastic.- Dimension of Standard Model: OD: 3" (75~79mm) ID: 1.2~2.1"(30~55 mm) Width: 25mm.- Other size is available for custom-made. ....
The Spec Of Machinery Part and Component : AEG-004 / FRICITION RING - For paper and plastic - Dimension of Standard Model: OD: 5" (125mm) ID: 2.3~3.9"(60~100 mm) Width: 25mm.- Other size is available for custom-made ....
The Spec Of Machinery Part and Component : AEG-012 / FRICITION RING - Bakelite Type- Dimension of Standard Model OD: 3" (75~79mm) ID: 1.2~2.0"(30~50 mm) Width: 50 mm.- Other size is available for custom-made. ....
The Spec Of Machinery Part and Component : Product Name : AEG-011 / Friction Ring - Bakelite Type - Dimension of Standard Model OD: 3" (75~79mm) ID: 1.2~1.8"(30~45 mm) Width: 37 mm.- Other size is available for custom-made. ....
The Spec Of Machinery Part and Component : Product Character
•Recommend for rewinding work of narrow roll width, multiple cores or thin-wall cores.
•Continuous leaf surface and 360-degree radial contact can provide excellent support
and gripping force to thin wall core, and minimize the core deformation and slip.
•According to customer's de....
The Spec Of Machinery Part and Component : Product Character
•Recommend for rewinding/unwinding.
•Easy maintenance. Replace bladder strips quickly and easily.
•No need to remove the journal during the replacement of bladder.
•Hard rubber elements are standard; aluminum element
is available to suit various applications. •Cantileve....
The Spec Of Machinery Part and Component : Product Character
•Recommend for rewinding/unwinding
which requires high precision on diameter.
•Suitable for the operation with core tubes in different length.
•Two stage expansion- expand first for centering, then gripping.
•No roll loping.
•Reduces core vibration and machine wearing. •Ea....
The Spec Of Machinery Part and Component : • For coreless winding. Apply to shrink film, landscape film, rubber roofing, plastic fencing or netting, and all other material.
• Green technology. Eliminate the disposal of core and save the cost for core.
• High production efficiency. No need for taping the web to the shaft. The changeover time is minimized....
The Spec Of Machinery Part and Component : • The spring or cylinder on shaft generates the force on Bakelite friction ring to adjust the torque on core and core slipping.
The tension of web can be equalized and assure high quality output.
• All differential shafts are custom-made.
Materials, diameters, lengths, journals, mounting types are made to you....
The Spec Of Machinery Part and Component : * Product Name : AEA-004 3" X 6" SPRING TYPE MECHANICAL CHUCK
* Recommend for the roll stand with hydraulic arm to provide the side force.
* Constant and reliable core grip without slipping.
* Spring mechanism guarantees the positive lug retraction and won't get core stuck on the chuck.
* High concent....
The Spec Of Machinery Part and Component : • With proper air pressure maintained, the cores slip at controlled speed.
The tension can stay in low and equal to assure the excellent output.
• Slipping internally reduces the risk of damage by dust and lateral movement.
• All differential shafts are custom-made.
All materials,diameters, lengths, journa....
The Spec Of Machinery Part and Component : * Type: FLANGE & FOOT MOUNT CHUCKS / ROUND TYPE
* Standard shaft length for STW/FLW 50 is 110mm.
* Length and O.D. of extension shaft is available for custom-made.
* Aston Texh. Ltd. reserve the right to change materials and specifications without prior notice.
The Spec Of Machinery Part and Component : *Product Name: Lathe Chucks - SOLID ROTARY AIR CYLINDER.
*Type: PNEUMATIC CHUCKS SERIES, LA Series
The Spec Of Machinery Part and Component : *Product Name: Lathe Chucks - PULL BACK CHUCK FIXTURES.
*Type: PNEUMATIC CHUCKS SERIES, MPL Series
The Spec Of Machinery Part and Component : *Product Name: Lathe Chucks - 3-JAW SOLID POWER CHUCK.
*Type: HYDRAULIC CHUCKS SERIES, OP Series.
The Spec Of Machinery Part and Component : Product Name: Lathe Chucks - 2-JAW HIGH SPEED HOLLOW POWER CHUCK.
*Type: HYDRAULIC CHUCKS SERIES, OPT Series.
The Spec Of Machinery Part and Component : *The shank and keyless Drill are combined as one body, so that the Drill Chuck will not be fallen out when heavy cutting is being performed.
*The drill will not be fallen (dropped) out when the machine main spindle is instantly stopped.
*The Run-out is within 0.05mm and high precision can maintained over a long per....
The Spec Of Machinery Part and Component : *Suitable for general electric drill, pneumatic drill, impact electric drill, light weight.
*Key hole hardened by high frequency heat treatment, long service life.
The Spec Of Machinery Part and Component : *Suitable for use on heavy duty & extra heavy duty.
*For milling machine, lathe, drill machine & wood working machine.
The Spec Of Machinery Part and Component : *KEYLESS DRILL CHUCKS.
*TYPE : H.
The Spec Of Machinery Part and Component : *Product Name: KEYLESS DRILL CHUCKS.
*TYPE : XH.
The Spec Of Machinery Part and Component : *Special design & manufacture against for super heavy torque (Clamping capacity) use.
*Owing to inspecting strictly & with excellent RUN-OUT accuracy and quality guaranteed the gripping power is double than the general brand.
*Avoid the drill dropped when used in instant change of direction and equipped wi....
