The Spec Of Metalworking Lathe : 1. Fully enclosed preloaded angular contact ball bearing headstock with splash shield for spindle.
2. Fast lever collet chucking with a single movement.
3. Specially designed bed ways are made of hardened and ground alloy tool steel that resist wear.
4. The angular guide ways allow chips to fall in the oil pan.
....
The Spec Of Metalworking Lathe : 1. Efficient, accurate power turret (optional):
(1) The electric H4 turret is driven by a worm gear/worm wheel mechanism for convenient tool change. It is powered by a 375 W. motor with great clamping force up to 1 ton.
(2) Specially designed post body prevents coolant and chips getting into post. Body will not move....
The Spec Of Metalworking Lathe : Compound type for cutting and milling.
For cutting:
1. Normal size:
(1) Swing over bed: 180mm (7").
(2) Swing over cross slide: 100mm (4").
(3) Distance between center: 350mm (133/4").
2. Bed:
(1) Width of the bed surface: 83mm (32/8").
(2) Total length of the bed: 670mm (26"). ....
The Spec Of Metalworking Lathe : Intergral type (body and bottom) with oblique body and good vibrabtion resistance;
Good water resistance, convenient escaping of chips and high speed cutting;
High-precise oil chuck and the precise tool apron with high effciency;
High precise and stable operation. 1. Max tactical diameter of body: 380mm.
2. Max....
The Spec Of Metalworking Lathe : 1. 45 d slant bed one-piece strong structure.
2. Box-way heavy-cut vibration absorbing.
3. 6'', 8', 10' chuck.
4. A2-5 (ball), a2-6, a2-8 (roller) spindle.
5. Hydro/ servo turret. 1. Chuck: 6’’ x 6000rpm, 8’’ x 4200rpm, 10’’ x 3500rpm.2. Turret: 20x12, 25x....
The Spec Of Metalworking Lathe : 1. Optimum structural design a new definition for rigidity and stability:
With years of efforts of research and development, the Shun Chuan's slant bed CNC lathe will offer the unique rigidity. The design concept behind the CNE-20/CNE-26 series is to enhance heavy duty, precision and stability. With its excellent ....
The Spec Of Metalworking Lathe : STANDARD ACCESSORIES:
1.CNC Controller
2.Rotating center MT.4
3.Level pads - 6 pcs
4.Tool set and box
5.Machine light
6.Operation manual & parts list
OPTIONAL ACCESSORIES:
1.3-Jaw scroll 8" chuck
2.4-Jaw independent 10" chuck
3.Electric H4 turret
4.Hydraulic P8 turret with
boring bar holde....
The Spec Of Metalworking Lathe : STANDARD ACCESSORIES:
1.CNC Controller
2.Rotating center MT.4
3.Level pads - 6 pcs
4.Tool set and box
5.Machine light
6.Operation manual & parts list
OPTIONAL ACCESSORIES:
1.3-Jaw scroll 8" chuck
2.4-Jaw independent 10" chuck
3.Electric H4 turret
4.Hydraulic P8 turret with
boring bar holde....
The Spec Of Metalworking Lathe : •All models with oil bathed lubrication system to headstock.
•All models meet CE. (on request)
•All models with 40mm (1.57") spindle bore, ASA D1-4.
•All castings are properly stabilized and stress relieved.
•Bed ways are hardened & ground to min. HS-70.
•Extremely low noise level.
•Foot b....
The Spec Of Metalworking Lathe : •E.V.S models with auto lubrication system to headstock & external tank for cooling the oil.
•All models with one piece solid stand.
•All models with universal feed gearbox & reversable apron.
•All models meet CE. (on request)
•All models with 52.5mm (2.066") spindle bore, ASA D1-6.
•All ....
The Spec Of Metalworking Lathe : •All models with one piece solid stand.
•All models with universal feed gearbox & reversable apron.
•All models meet CE. (on request)
•All models with 52.5mm (2.066") spindle bore, ASA D1-6.
•All castings are properly stabilized and stress relieved.
•Bed ways are hardened & ground to min. ....
The Spec Of Metalworking Lathe : •E.V.S models with auto lubrication system to headstock & external tank for cooling the oil.
•All models with one piece solid stand.
•All models with universal feed gearbox & reversable apron.
•All models meet CE. (on request)
•All models with 52.5mm (2.066") spindle bore, ASA D1-6.
•All m....
The Spec Of Metalworking Lathe : •E.V.S models with auto lubrication system to headstock & external tank for cooling the oil.
•All models with one piece solid stand.
•All models with universal feed gearbox & reversable apron.
•All models meet CE. (on request)
•All models with 80mm (3.149") spindle bore, ASA D1-6.
•All mod....
The Spec Of Metalworking Lathe : •All models with one piece solid stand.
•All models with universal feed gearbox & reversable apron.
•All models meet CE. (on request)
•All models with 80mm (3.149") spindle bore, ASA D1-8.
•All models cross slide is hardened and ground to prolong operation life.
•All castings are properly....
The Spec Of Metalworking Lathe : •All castings are properly stabilized and stress relieved.
•Bed ways are hardened & ground to min. HS-70.
•Turcite B coating between the bed and carriage.
•Extremely low noise level.
•Foot brake pedal provided.
•Built-in coolant pump & fitting provided.
•CSS (constant surface speed control) ....
The Spec Of Metalworking Lathe : •All castings are properly stabilized and stress relieved.
•Bed ways are hardened & ground to min. HS-70.
•Turcite B coating between the bed and carriage.
•Extremely low noise level.
•Foot brake pedal provided.
•Built-in coolant pump & fitting provided.
•CSS (constant surface speed con....
The Spec Of Metalworking Lathe : 1.Enlarged Saddles and Fully Supported Cross Slide (X-axis)
•Bed ways and cross slide are hardened and ground to min HS70.
•Turcite "B" coating between the bed and carriage.
2.8-Station Hydraulic Turret (Optional)
3.Direct-driven Main Spindle Motor
•The spindle is supported by a single cylinder be....
The Spec Of Metalworking Lathe : 1.Extra Rigid Solid Construction Bracket, for Ball Screw and Motor (Z-axis).
2.8-Station Hydraulic Turret (Optional).
3.Headstock
•Four gear range of spindle speeds driven by built-in AC motor. The operator can input the required spindle speed by M code, and the spindle will automatically reach the required speed.....
The Spec Of Metalworking Lathe : 1. Optimum structural design a new definition for rigidity and stability:
With years of efforts of research and development, the Shun Chuan's slant bed CNC lathe will offer the unique rigidity. The design concept behind the CNE-20/CNE-26 series is to enhance heavy duty, precision and stability. With its excellent ....
The Spec Of Metalworking Lathe : 1. Efficient, accurate power turret (optional):
(1) The electric H4 turret is driven by a worm gear/worm wheel mechanism for convenient tool change. It is powered by a 375 W. motor with great clamping force up to 1 ton.
(2) Specially designed post body prevents coolant and chips getting into post. Body will not move ....
The Spec Of Metalworking Lathe : 1. High/ low speed quick change level for Convenience.
2. Designed to machine precision small diameter parts.
3. High performance machining capability of shaft, chucking, or collet held work piece. 1. Spindle capacity: (1) With chuck: 150mm (6"). (2) With expanding collets: 76 mm (3"). (3) With round 5....
The Spec Of Metalworking Lathe : Lathes for metal processing. 1. Swing over bed: 300mm. 2. Centers distance: 910mm. 3. Spindle speed: 90-1800rpm. 4. Head hole taper: m.t.#5. 5. Spindle hole: 38mm. 6. Tail hole taper: m.t.#3. 7. Metric threads: 0.4 -7mm, 26 kinds. 8. Inch threads: 56 tpi, 34 kinds. 9. Main motor: 2hp, 400v. 10. Pump motor: 1/8hp. 1....
