Select
The Spec Of Electrical and Electronic Components : 1. The series is specially designed for applications requiring higher brightness.
2. The white LED which was fabricated using a blue LED and a phosphor, and the phosphor is excited by blue light and emits yellow fluorescence. The mixture of blue light and yellow light results in white emission.
3. Utilizing advanced ....
Select
The Spec Of Electrical and Electronic Components : 1. 3 x 1w LED, each LED 50 ~ 60lm, total 165lm.
2. 3-in-1 optical lens ( 30 - degree).
3. Metal core PCB for heat sinking.
4. With mounting holes on the Metal Core PCB so that extra heat sink can be mounted, closely.
5. To be driven with constant current 350mA led driver.
6. Colors available: white ( 6000 - 6500k)....
Select
The Spec Of Electrical and Electronic Components : 1. Control up to 110 rectifier modules and monitor 4 banks of
batteries in a 24V or 48V DC power system
2. Microprocessor-based front panel with 100 stored alarms
4 digit, 12mm LCD display +/-5% accuracy normally displays output
current and output voltage
3. 16 character, a 2-line alphanumeric LCD d....
Select
The Spec Of Electrical and Electronic Components : 1. The plastic package carries UL flammability classification 94V-0.
2. Low power loss, high efficiency.
3. Typically applied for use in low voltage high frequency inverters, and polarity protection. 1. 20V ~ 100V; 1.0 ampere/ DO-41/ (SM-1/ SMA/ SMB).
2. Also available in SMD packages. (e.g.: the SM-1 case with....
Select
The Spec Of Electrical and Electronic Components : 1. Wallmount / U.S.A / Taiwan.
2. Application: broadband & network equipment, wireless products, portable equipment. 1. Input range: 90-264V/47-63 Hz.
2. Output: 4.5V-24V / 0.6-3.5A (20W max.).
3. Efficiency: 77% typical.
4. Protection: short circuit protection/over voltage protection/ over current protection.
....
Select
The Spec Of Electrical and Electronic Components : 1. High-power solution provides you larger wireless rang and enhance mobility of usage.
2. IEEE 802.11b/g compliant with 54Mbps high-speed data rate.
3. Operation modes: AP, client, WDS, AP+WDS.
4. DHCP server / client.
5. Wireless users access control.
6. Wireless security- 64 / 128bit WEP, WPA / WPA2, 802.1x, 80....
Select
The Spec Of Electrical and Electronic Components : 1. Power cord replaces the original nintendo wii AC adapter.
2. Designed for all country or area outlets.
3. Replaces nintendo wii AC adapter full time in case broke or got damaged in any way. 1. Input: 100 to 240V.
2. Output: 12V DC and 3.7A. ....
Select
The Spec Of Electrical and Electronic Components : 1. Description:
Made up of fifty super bright LED bulbs giving out red light, used for household illumination or as reflectoscop.
2. Character:
Super bright LED; shockproof, durable, long life with over 50,000 hours on average; eco-label, saving energy; fast active, pure color with nice appearance ;IC controls t....
Select
The Spec Of Electrical and Electronic Components : 1. Application: wooden case, assembly, siding, panel, decking, sheathing, fencing.
1. Shank: smooth, ring, screw. Our morden specialized equipment can manufacture all kinds of spoolless coils to meet your needs. Please contact us for more information. ....
Select
The Spec Of Electrical and Electronic Components : 1. Supports up to 64 memory cards:
(1) CF 1/ CF 2/ extreme CF/ extreme III CF/ ultra II CF/ HS CF/ MD.
(2) MS/ MS DUO/ MS PRO/ MS PRO DUO/ MS Magic Gate/ MS.
2. Magic Gate PRO/ MS Magic Gate DUO/ MS Magic Gate.
3. PRO DUO/ extreme MS PRO/ extreme III MS.
4. PRO/ ultra II MS PRO/ HS MS Magic Gate PRO/ HS MS.
5. M....
Select
The Spec Of Electrical and Electronic Components : 1. Ceramic Disk Capacitor & Multi-layer Ceramic Capacitor (Radial).
2. This SPARK GAP is designed for use in protector of CRT circuit and protector of circuit tothe high potential pulse.
3. As this SPARK GAP is a complete sealing type, so in the discharge, a spark does not appear in the outside, a discharge sound doe....
Select
The Spec Of Electrical and Electronic Components : Features:
1. Typical 3.2 x 2.5 x 0.9 mm SMD.
2. For automatic assembly.
3. Compactness and lightweight.
4. Low power consumption.
5. VCTCXO available.
6. Low thickness.
7. External DC-CUT capacitor required. NPO 150pF recommended. 1. Frequency range: 16MHz~40MHz
2. OEM & ODM orders are welcome.
3. Voltage ....
Select
The Spec Of Electrical and Electronic Components : TFT LCD-TVs power supplies for 29" to 42" large monitor. 1. I/P (VAC): 100-240V, 47-63Hz, 5A.
2. O/P (VDC): 24V/6A, 12V/3A, S/B, 5V/1.5A.
3. Max: 190W. ....
Select
The Spec Of Electrical and Electronic Components : 1. 0.8mm board to board male & female (right angle assembly).
2. Height: 6.15mm. 1. BM05 & BF05 series: 0.5mm board to board male & female mating height 1.5mm SMD type
2. Position: 10, 12, 14~40, 50, 60, 70~100. ....
Select
The Spec Of Electrical and Electronic Components : 1. Point of load (POL) applications.
2. Open frame SIP.
3. Low output ripple and noise.
4. Positive enable function.
5. No minimum load requirement.
6. Fixed frequency switching ( 300KHZ). 1. Features:
(1) High efficiency: 3.3V@95%.
(2) -40 to +85 ambient operating temperature.
(3) Adjustable output from 0....
Select
The Spec Of Electrical and Electronic Components : 1. Designed for surface mounting on high density PC board.
2. Applicable to automatic mounting machine using carrier tape.
3. Load life of 2000 hours at 85℃.
4. Chip type with 5.5mm weight. 2. Series: WX.
3. Applications: 5.5 mmL standard.
4. Temperature range((oC): 40 to+85.
5. Maximun life time: 2000.
6.....
Select
The Spec Of Electrical and Electronic Components : 1. Gage machines.
2. Vending machines.
3. Office machinery printers.
4. Transportation equipment.
5. Electronic appliances.
6. Others packaging machines. 1. Duty cycle continuous: 50%, 25%, 10%.
2. Power consumption: 1.0w, 2.0w, 4.0w, 10w.
3. MAX on time (sec): ∞ 50, 18, 2. ....
Select
The Spec Of Electrical and Electronic Components : Introduction of CR: featuring consistency and stably-controlled, these carbon film resistors with reasonable prices are widely & largely used in the electronic, electrical and information industries.
This resistor is a ceramic bar tightly coated with a carbon film which is composed of carbon separated from organic com....
Select
The Spec Of Electrical and Electronic Components : Battery contact spring as industrial products seems to be simple and easy to design, but the actual design require accurate study especially on the selection of materials. The selection of material need to consider product function and the number of process needed on the spring itself. ....
Select
The Spec Of Electrical and Electronic Components : 1. Cup-yoke, back can of automotive and Hi-Fi speaker.
2. Cup-yokes use cold forging production with one piece structure for cost saving. According to customer's specification. ....
Select
The Spec Of Electrical and Electronic Components : With years of research and development, we have brought out our cutting edge invention, mini LED flashlight for promotional or gift use. The mini LED flashlight is easy to carry or using in the dark area. It comes with a super-bright light bulb that has a life span of 100,000 hours. It is great for concerts, mountain c....
Select
The Spec Of Electrical and Electronic Components : Features:
Used for various types of electronic parts. We can produce any sizes and styles as your requests, welcome OEM & ODM. ....
Select
The Spec Of Electrical and Electronic Components : 1. Material: phosphor bronze.
2. No burrs and die marks are permitted. Size: 42.8mm x 36.4mm x T3.7mm. ....
Select
The Spec Of Electrical and Electronic Components : Digital 2.4GHZ RF transmitter and receiver modules using GFSK modulation, 3Mbps data rate, up to 15 meters indoor, and 80 meters outdoor. 1. The RF module transmitter employed GFSK modulation to deliver high-speed data rate up to 5 Mbps.
2. The RF module receiver with - 82dBm or better sensitivity allows system t....
Select
The Spec Of Electrical and Electronic Components : 1. Good compatibility.
2. Accurate mechanical dimensions.
3. Good reliability and stability.
4. Compliant with RoHS, bellcore, IEC. 1. Outer diameter: Ø2.4990¡Ó0.0005mm.
2. Inner diameter: Ø0.1250 - 1260 + 0.003/ -0mm.
3. Concentricity: ≤ 1.40µm. ....
Select
The Spec Of Electrical and Electronic Components : 1. Model: H1201E, H1202E, H1203E.
2. VA: 20, 20, 20.
3. PRI(VAC): 120, 240, 208 / 240. H1 series panel mount. ....
Select
The Spec Of Electrical and Electronic Components : Electrical panel control components supplier and manufacturer from Taiwan and China. For more specification and information, please visit our website and contact us. ....
Select
The Spec Of Electrical and Electronic Components : 1. Magnetically shielded and low DC resistance.
2. Ideal for DC-DC converter applications in hand personal computer etc.
3. Available on tape and reel for automatic insertion. 1. Inductance: 10µH~1000µH.
2. IDC: 1.35(A)~0.14(A). ....
Select
The Spec Of Electrical and Electronic Components : To exceed customers requirement, we are eager to develop new products. We are able to produce all kinds of different material like SILICON, NBR POLYACRYLATE, VITON, EPDM, HNBR, TEFLON, etc. We can produce any sizes and styles as your requests, welcome OEM & ODM. ....
Select
The Spec Of Electrical and Electronic Components : 1. PCT-UR2 is a two-way converter for RS-232 and USB, it applies to computer, computer & controller (point to point) and long distance of internet communication. It applies multi-controllers on line connection.
2. Widely-used in industry automatic control system, EZ card system, access control system, parking lot sys....