1. Architectural decorative lighting.
2. Archway, canopy and bridge edge lighting.
3. Amusement park, theater and aircraft cabin mood lighting.
4. Emergency hallway lighting.
5. Auditorium walkway lighting.
6. Stairway accent lighting.
7. Concealed lighting .
8. Emergency exit path lighting.
9. Cove lighting.....
1. Soft SMD strip with wide viewing angle.
2. Primary competitive advantages: "green" product.
3. Wide applicability, easy to install and maintain, very flexible, easily be curved to any shape.
1. Low power consumption.
2. High efficiency.
3. Versatile mounting on p.c board or panel.
4. Waterproof.
5. I.C compartible/ low current requirement.
1. Uses trinity-SMD LED as lighting source, widely viewing.
2. Uses FPC circuit board, made it easily to bend ( thickness: 0.15mm).
3. M adhesive in the back, it could be affixed on glass, carpentry and mettlic surface easily.
4. Have 3pcs LED for each loop and could be snipped for each 50mm, easily for instal....
1. Product detail:
(1) white, blue, green, yellow, orange, red & purple
(2) 0.4 meter long, 12V, 25 LEDs.
(3) 0.5 meter long, 12V, 30 LEDs.
(4) 1 meter long, 12V, 60 LEDs.
2. Product detail:
Benefits - can be separable every 3 LEDs along the cut -mark- made of printed circuit board with self- adhesive back- c....
1. Colors: available for each single color and RGB.
2. High brightness, low power consumption, easy to install.
3. To be controlled by LED controller, at least 8 color changing modes for your option.
4. Application: decoration lighting.
1. Waterproof Ribbonstrip is a member of our LED strip solutions specially designed for exterior application requiring ultimate flexibility.
2. The key feature of color vision’s Waterproof Ribbonstrip is ultimate flexible PCB design allowing lighting designers to realize immediate application in various locations. ....
Power wireless has been passed VDE; 110V; 100 led have been divided into three group and they are in series first, and then parallel connection. They have CE certification.
1. Flexible LED (SMD) strip light.
2. 8mmx500mm each reel.
3. All color available.
1. Working voltage: 12V DC.
2. Length 30cm with 12 superbright tri-chip RGB SMD LED.
3. Width: 8mm.
4. Color: RGB color-changing.
5. Beam aAngle: 120 degree.
6. Waterproof IP67, suitable for outdoor use.
7. Easy connection with snap-in connectors.
8. Solid-state, high shock and vibration resistant.
9. Major red....
1. Clear PVC housing, superflux LED encapsulated.
2. Professionally encapsulated to be waterproof IP67.
3. Length available: 50cm with 30 LEDs, 100cm with 60 LEDs.
4. Colors available: white, red, green, blue, amber, RGB.
5. Working voltage: 12VDC.
6. Beam angle: 90 degree.
7. Superflux LED up to 10,000mcd.
8. S....
1. Frosted PVC, making the light output smooth and even.
2. Watperproof IP65, suitable for outdoor use.
3. Size available: 25cm, 50cm, 75cm, 100cm.
4. Colors available: white, red, green, blue, yellow.
5. Runs on 12-volt systems like solar cell charged batteries.
6. Solid-state, high shock / vibration resistant.....
Though neon has long been the mainstream of the outdoor linear lighting, there still exist unsolved problems. These include complicated installation, a fragile nature, potential shock hazard, high maintenance cost and high power consumption.
1. Clear PVC, 3mm leds encapsulated.
2. Watperproof IP65, suitable for outdoor use.
3. Size available: 24cm, 48cm, 72cm, 96cm.
4. Colors available: white, red, green, blue, yellow.
5. Runs on 12-volt systems like solar cell charged batteries.
6. Solid-state, high shock / vibration resistant.
7. Major reduction....
1. Continuous length flexible led light strips.
2. Watperproof IP65, suitable for outdoor use.
3. Runs on 12-volt systems like solar cell charged batteries.
4. Easy connection with snap-in connectors.
5. Solid-state, high shock / vibration resistant.
6. Major reduction in power costs.
7. Wide angle smd leds us....
1. Power wireless has been passed VDE.
2. Power: 110V.
3. 100 led have been divided into three group and they are in series first, and then parallel connection.
4. They have CE certification.
1. Power wireless has been passed VDE.
2. Power: 110V.
3. 100 led have been divided into three group and they are in series first, and then parallel connection.
4. They have CE certification.
1. 520 x 18mm waterproof light bar ( 30 LEDs).
2. Printed circuit board thickness: 1.6MM.
3. LED view angle: 80 degree.
4. Package: 1PCS/ PVC tube.
5. Forward current: 200MA.
1. Flexible led strip light, extremely luminous with wide viewing angle.
2. Wide applicability.
3. Easy to install and maintain.
1. Uses TOP LED as lighting source, it shine uniformity and have high brightness.
2. Uses FPC circuit board, made it easily to bend ( thickness: 0.15mm).
3. 3M adhesive in the back, it could be affixed on glass, carpentry and mettlic surface easily.
4. Have 3pcs LED for each loop and could be snipped....
1. Uses φ3 Round LED as lighting source, widely viewing.
2. Uses FPC circuit board, made it easily to bend.
3. Have 3pcs LED for each loop and could be snipped on for each 60mm, easily for installation current, stable working was ensured.
4. Could be bent optionally.
5. Application: widely applied for bureau....
1. Uses trinity-SMD LED as lighting source, it shine uniformity and have high brightness.
2. Uses FPC circuit board, made it easily to bend ( thickness: 0.15mm).
3. Have 3pcs LED for each loop and could be snipped for each 50mm, easily for installation.
4. As lowing voltage with resistance and having....
1. Uses trinity-SMD LED as lighting source, it shine uniformity and have high brightness.
2. Uses FPC circuit board, made it easily to bend ( thickness: 0.15mm).
3. Have 3pcs LED for each loop and could be snipped for each 50mm, easily for installation.
4. As lowing voltage with resistance and having....
1. Uses TOP LED as lighting source, it shine uniformity and have high brightness.
2. Uses FPC circuit board, made it easily to bend ( thickness: 0.15mm).
3. Have 3pcs LED for each loop and could be snipped for each 50mm, easily for installation.
4. As lowing voltage with resistance and having IC constan....
1. Uses TOP LED as lighting source, it shine uniformity and have high brightness.
2. Uses FPC circuit board, made it easily to bend ( thickness: 0.15mm).
3. Have 3pcs LED for each loop and could be snipped for each 50mm, easily for installation.
4. As lowing voltage with resistance and having IC constan....
1. Uses TOP LED as lighting source,it shine uniformity and have high brightness.
2. Uses FPC circuit board,made it easily to bend ( thickness: 0.15mm).
3. 3M adhesive in the back, it could be affixed on glass, carpentry and mettlic surface easily.
4. Have 3pcs LED for each loop and could be snipped for ....
1. Uses φ5 flatheaded LED as lighting source, widely viewing.
2. Double side circuit board, soldering more independently and easily bending ( thickness: 0.5mm).
3. Applied for 4p terminal as input and output, easily connecting.
4. Could be snipped for each 102mm, convenient for installation.
5. Limiting current wi....
1. Uses trinity-SMD LED as lighting source, widely viewing.
2. Uses FPC circuit board, made it easily to bend ( thickness: 0.15mm).
3. M adhesive in the back, it could be affixed on glass, carpentry and mettlic surface easily.
4. Have 3pcs LED for each loop and could be snipped for each 50mm, easily for instal....
1. Uses φ3 round LED as lighting source, widely viewing.
2. Uses FPC circuit board, made it easily to bend.
3. Have 3pcs LED for each loop and could be snipped on for each 60mm, easily for installation current, stable working was ensured.
4. Could be bent optionally.
5. Application: widely applied for bureau,....
1. Colors: available for each single color and RGB.
2. High brightness, low power consumption, easy to install.
3. To be controlled by LED controller, at least 8 color changing modes for your option.
4. Application: decoration lighting.
