Select
The Spec Of Alarm Manufacturers : 1. Item No.: S283-110.
Voltage: AC110V.
2. Item No.: S283-220.
Voltage: AC220V. 1. Item No.: S283-110.
(1) Rpm: 5500.
(2) Current: 2A.
2. Item No.: S283-220.
(1) Rpm: 5500.
(2) Current: 1A. ....
Select
The Spec Of Alarm Manufacturers : 1. There are two LEDs which can turn 360o and watch the situation of the detector at any angle.
2. The use of common base is advantageous to the exchange of detector.
3. Functioning way: as the fire is formed rapidly, the rapid heat convection and hot wind make the room temperature rise drastically. The Rate of ris....
Select
The Spec Of Alarm Manufacturers : 1. Output alarm: 120dB/1M.
2. The belt on the back can hang on the satchel (for children).
3. LED color: blue.
4. Battery: AAA x 2. *Size: 75 x 55 x 30.5mm. ....
Select
The Spec Of Alarm Manufacturers : 1. Two button fixed code transmitter.
2. Self learning code.
3. Multi-function 2 button transmitter.
4. Error sector report.
5. Remote trunk release.
6. Memory sector trigger L.E.D indicator.
7. Trigger sector.
a.Door input (negative).
b.Hood & trunk (negative).
c.Hot wire.
d.Current sen....
Select
The Spec Of Alarm Manufacturers : 1. IR-250LC is a battery powered passive infrared detector designed for the system which requires very low power consumption. This detector provides sufficient space for battery and transmitter required by OEM system.
2. Its extremely low power electronics offers exceptionally long battery life.
Different frequency....
Select
The Spec Of Alarm Manufacturers : Products introduction:
The system, an intelligent general-purpose alarm system for households, provides a broad portfolio of alarming functions against fires, theft, hijack, coal gas and poisonous gases. To satisfy the market demand, the system adopts the digital circuit processing technology as the control center, ....
Select
The Spec Of Alarm Manufacturers : 1. Active / Passive arming selectable.
2. Six-tone, backup or normal siren.
3. Sensors:
(1) Positive trigger.
(2) Ignition.
(3) ES connector.
(4) Valet switch.
(5) Negative trigger / pin switch.
4. Starter / ignition killer.
5. Door lock / unlock output. 1. Automatic defect bypass.
2. Auxiliary negative o....
Select
The Spec Of Alarm Manufacturers : 1. Power: 12V DC.
2. Current: about 25mA @ standby, 135mA @ activation.
3. Back-up time: 30 hours @ standby. 1. Siren output: 108+/- 3dB.
2. Size: 50 x 160 x 240 mm.
3. Weight (w/o 12v/240v adapter): about 618 g.
4. Red light option for fire alarm or medical alert. ....
Select
The Spec Of Alarm Manufacturers : 1. Size: 53mm (Dia) x 56mm(L).
2. Voltage: DC 12V.
3. Size: 1-tone.
4. Output: 118DB.
5. Packing: 100pcs / 1.4CFT. We also signed contracts with several companies in various countries as their strobe light OEM supplier. ....
Select
The Spec Of Alarm Manufacturers : 1. Voltage: DC 12V.
2. Tone: 1-Tone, 6-Tone.
3. Output: 15W/20W.
4. Packing: 40PCS/1.7CFT. 1. Size: 88mm (Dia) x 103mm (L). ....
Select
The Spec Of Alarm Manufacturers : 1. Volatage: DC 12V24V.
2. Tone: 1-Tone, 6-Tone.
3. Output: 15W / 20W.
4. Packing: 30PCS / 1.7CFT. Size: 102mm(Dia) x 110mm(L). ....
Select
The Spec Of Alarm Manufacturers : 1. Voltage: DC 12V.
2. Tone: 1-Tone.
3. Output: 118DB.
4. Pcking: 100PCS / 1.4CFT. Size: 53mm(Dia) x 56mm (L). ....
Select
The Spec Of Alarm Manufacturers : 1. CP 22 piezo siren.
2. Size: 53mm (Dia) x 56mm (L).
3. Voltage: DC 12V.
4. Tone: 1-tone.
5. Output: 118 DB.
6. Packing: 100PCS/1.4 CFT. 1. CP 22 piezo siren.
2. Size: 53mm (Dia) x 56mm (L)
3. Voltage: DC 12V.
4. Tone: 1-tone.
5. Output: 118 DB.
6. Packing: 100PCS/1.4 CFT. ....
Select
The Spec Of Alarm Manufacturers : 1. Voltage: DC 12V.
2. Tone: Hi-LO, BI-BI.
3. Output: 108DB.
4. Packing: 100PCS / 1.6CFT. Size: 57mm(Dia) x 56mm(L). ....
Select
The Spec Of Alarm Manufacturers : 1. Voltage: DC12V.
2. Tone: 1-Tone, 6-Tone, BI-BI.
3. Output: 113DB.
4. Packing: 100PCS / 1.1CFT. Size: 54mm (Dia) x 57mm (L). ....
Select
The Spec Of Alarm Manufacturers : 1. EA1001 60W siren amplifier.
2. Function: air horn, siren, hi-Lo, wail, yelp, whistle, radio microphone. 1. Voltage: DC 12 / 24V.
2. Current: 5amps.
3. Power: 60 walts. ....
Select
The Spec Of Alarm Manufacturers : 1. KJ1S cubic tower with With siren.
2. color: red, yellow, blue, green. 1. Voltage: AC110V / 220V DC12V / 24V.
2. Blue: 12V 5W 24V 10W. ....
Select
The Spec Of Alarm Manufacturers : 1. Mini MS-12:
(1) Voltage: DC 12V.
(2) Current: 1.0A.
(3) Power: 105db/M.
2. Mini MS-24:
(1) Voltage: DC 12V.
(2) Current: 0.5A.
(3) Power: 105db/M.
3. Mini MS-110:
(1) Voltage: AC 110V.
(2) Current: 0.5A.
(3) Power: 105db/M.
4. Mini MS-220:
(1) Voltage: AC 220V.
(2) Current: 0.2A.
(3) Power: 105db/M.
Select
The Spec Of Alarm Manufacturers : 1. MS-12:
(1) Voltage: DC 12V.
(2) Current: 8.0A.
(3) Power: 135db/M.
2. MS-24:
(1) Voltage: DC 12V.
(2) Current: 6.0A.
(3) Power: 135db/M.
3. MS-110:
(1) Voltage: AC 110V.
(2) Current: 1.5A.
(3) Power: 135db/M.
4. MS-220:
(1) Voltage: AC 220V.
(2) Current: 0.8A.
(3) Power: 135db/M. Size: 205mmL x 13....
Select
The Spec Of Alarm Manufacturers : 1. Power: 100 Watts.
2. Function: air horn, siren, hi-lo, wail, yelp, whistle, radio microphone. 1. Voltage: DC 12 / 24V.
2. Current: 8amps. ....
Select
The Spec Of Alarm Manufacturers : We also signed contracts with several companies in various countries as their strobe light OEM supplier. 1. S283-110:
(1) Voltage: AC 110V.
(2) Rpm: 5500.
(3) Current: 2A.
2. S283-220:
(1) Voltage: AC 220V.
(2) Rpm: 5500.
(3) Current: 1A. ....
Select
The Spec Of Alarm Manufacturers : We also signed contracts with several companies in various countries as their strobe light OEM supplier. 1. S290-110:
(1) Voltage: AC 110V 0.5A.
(2) Current: 105db/M.
2. S290-220:
(1) Voltage: AC 220V 0.2A.
(2) Current: 110db/M.
3. S290-12:
(1) Voltage: 1.0A.
(2) Current: 105db/M.
4. S290-24:
(1) Voltage:....
Select
The Spec Of Alarm Manufacturers : Active / Passive arming selectable
Six-tone high-power siren
Sensors:
Current sensor
Ignition
Negative trigger / Pin switch
Positive trigger
Optional ultrasonic sensor (U)
Vibration Door lock / Unlock output
Automatic defect bypass
ACJ (Anti-Car-Jacking)
Auxiliary negative output
Code learni....
Select
The Spec Of Alarm Manufacturers : 1. All-in-one siren design.
2. Sensors:
(1) Current.
(2) Vibration.
(3) Negative trigger.
(4) Positive trigger.
(5) Pin switches.
(6) Optional ES connector (U).
3. Six-tone (1m 120dB, coil).
4. LED status indicator.
5. Door lock / unlock output. 1. 9V nonrechargeable battery.
2. Optional connector page....
Select
The Spec Of Alarm Manufacturers : 1. The DP-550P DUOGUARD is a PIR + MW dual technology detector with pet-immunity detection. Utillizing patent pending Target Size Verification (TSV) technology, this state-of-the-art dual technology motion detector is able to immune the detection of domestic pet up to 18 kgs (40 lb).
2. This dual technology detectior....
Select
The Spec Of Alarm Manufacturers : 1. The IR-530P PRIMO is a cost effective passive infrared detector with state-of-the-art pet immunity technology. Utilizing IR-TEC's
Target Size Verification technology, this detector is able to immune the motions created by domestic pet up to 18 Kg.
The IR-530P gives every security professional the edges over the ....
Select
The Spec Of Alarm Manufacturers : 1. The IR-550P PEGASO is a passive infrared detector with pet-immunity detection. Utillizing patent pending Target Size Verification (TSV) technology, this state-of-the-art motion detector is able to immune the detection of domestic pet up to 18 kgs (40 lb).
2. It shares the same housing with other 550-series sensors....
Select
The Spec Of Alarm Manufacturers : 1. LC-200 series is a passive infrared SenSwitch with two dual element sensor built-in to providfe 200ultra wide angle detection. It can automatically switch on the indoor or outdoor lighting by sensing the presence of human body.
2. Its unique mechanism design provides possibility of wall or ceiling mount. Both LUX ....
Select
The Spec Of Alarm Manufacturers : 1. LC-780 series is a wide angle passive infrared SenSwitch designed to control indoor or outdoor lighting by sensing the presence of human body.
2. Its unique mechanism design make it able to be mounted on the wall or ceiling. The adjustable sensor head provides easy mounting site selection and optimum detection adj....