Select
The Spec Of Auto Alarm Security : 1. Active / passive arming selectable.
2. Six-tone, backup or normal siren.
3. Sensors:
(1) Positive trigger.
(2) Ignition.
(3) Es connector.
(4) Valet switch.
(5) Negative trigger / pin switch.
4. Starter / ignition killer.
5. Door lock / unlock output.
6. Automatic defect bypass.
7. Auxiliary negati....
Select
The Spec Of Auto Alarm Security : 1. Backup alarm and flash light.
2. Tone: BI-BI, lambada. 1. Voltage: DC 12V.
2. Packing: 100PCS/CTN.; 1.6CFT. ....
Select
The Spec Of Auto Alarm Security : 1. Two button fixed code transmitter.
2. Self learning code.
3. Multi-function 2 button transmitter.
4. Error sector report.
5. Remote trunk release.
6. Memory sector trigger L.E.D indicator.
7. Trigger sector.
a.Door input (negative).
b.Hood & trunk (negative).
c.Hot wire.
d.Current sen....
Select
The Spec Of Auto Alarm Security : Functions:
1. Active arming, remote door lock.
2. Active disarming, remote door unlock.
3. Car search, panic.
4. Opening door warning ( parking or in driving).
5. Auto memory of opened door arm warning.
6. 2nd time automatic rearm.
7. Auto control door lock function in driving.
8. Auto opening door function ....
Select
The Spec Of Auto Alarm Security : 1. Transponder system.
2. Self learning code.
3. Two way disable cut out (Relay Built-in 40Amp).
4. Security reset.
5. L.E.D indicator.
Select
The Spec Of Auto Alarm Security : 1.Fixed code.
2.Self learning code.
3.One buttons transmitter remote arm/disarm/panic.
4.L.E.S indicator.
5.Trigger sector.
a.Door input(negative).
b.Hot wire.
c.Current sensing(built-in).
d.Shock sensor(built-in).
6.One starter cut out(external 40Amp relay).
7.Remote door lock/unlock(singal ....
Select
The Spec Of Auto Alarm Security : 1. Negative signal output.
2. Ultrasonic movement detectors.
3. For vehicle.
4. Pre-wired female plug.
5. Adjustable sensitivity with L.E.D test indicator.
Select
The Spec Of Auto Alarm Security : 1. Negative signal output.
2. Pre-wired female plug.
3. Adjustable sensitivity with L.E.D test indicator.
Select
The Spec Of Auto Alarm Security : 1. Current sensing on/off.
2. Last auto arm on/off.
3. Auto re-arm on/off.
4. C.D.L output timer with 6 types.
5. Over-ride on/off.
6. Auto lock/unlock on/off.
7. Arming delay timer adjustment.
8. Silent on/off.
9. 4 digital reset code adjustment.
10.Auto arm trigger ACC/full.
11.Car-jack on/off.
....
Select
The Spec Of Auto Alarm Security : 1. Code hopping system for anti-scanning grabber.
2. Self learing code.
3. Multi-function 2 button transmitter.
4. Remote arm/disarm.
5. Remote trunk release.
6. Error sector report & by-pass.
7. Memory sector report L.E.D indicato.r
8. Trigger sector.
a. Door input (negative).
b. Hood & trunk(ne....
Select
The Spec Of Auto Alarm Security : 1. One button fixed code transmitter.
2. One piece contour.
3. Self learning code.
4. Remote CH-1=arm/disarm/2 seconds for panic.
5. Trigger sector.
a. Door (negative).
b. Hot-wire.
c. Shock sensor (built-in).
d. Current sensor.
6. Last auto arm.
7. Auto re-arm.
8. Head light.
9. Rem....
Select
The Spec Of Auto Alarm Security : 1. Two button fixed code transmitter.
2. Mini-one piece contour.
3. Self learning code.
4. Trigger sector.
a. Door (negative).
b. Hot-wire.
c. Shock sensor (built-in).
d. Current sensor.
5. Last auto arm.
6. Auto re-arm.
7. Dual parking lights(relay built-in).
8. Remote door lock/unloc....
Select
The Spec Of Auto Alarm Security : 1. One button fixed code transmitter.
2. Self learning code.
3. Remote CH-1=arm/disarm/2 sec for panic.
4. Trigger sector.
a. door (negative).
b. current sensor.
c. hot-wire.
5. Remote door lock/unlock singal output.
6. Auto lock/unlock.
7. Siren output.
8. One starter cut out (signal).
9.....
Select
The Spec Of Auto Alarm Security : 1. Code hopping system for anti-scanning grabber.
2. Self learing code.
3. Multi-function 2 button transmitter.
4. Remote arm/disarm.
5. Remote trunk release.
6. Error sector report & by-pass.
7. Memory sector report L.E.D indicator.
8. Two stage shock sensor.
9. Trigger sector.
a. Door input (negat....
Select
The Spec Of Auto Alarm Security : 1. Code hopping system for anti-scanning grabber.
2. Self learning code.
3. Multi-function 2 button transmitter.
4. Remote arm/disarm.
5. Remote trunk release.
6. Error sector report & by-pass.
7. Memory sector report L.E.D indicator.
8. Two stage shock sensor.
9.Trigger sector.
a.Door input(negativ....
Select
The Spec Of Auto Alarm Security : 1. Code hopping system for anti-scanning grabber.
2. Self learing code.
3. Remote active arm/disarm.
4. Remote trunk release.
5. Error sector report & by-pass.
6. Memory sector trigger report L.E.D indicator.
7. Two stage.
8. Trigger sector.
a. Door input (negative).
b. Hood & trunk input (negat....
Select
The Spec Of Auto Alarm Security : 1. Code hopping system for anti-scanning grabber.
2. Self learning code.
3. Multi-function 2 button trandmitter.
4. Remote arm/disarm/shock disable.
5. Remote trunk release/silent chirp/panic.
6. Error sector report & by-pass.
7. Memory sector report L.E.D indicator.
8. Two stage shock sensor (external sh....
Select
The Spec Of Auto Alarm Security : 1. Code hopping system for anti-scanning grabber.
2. Self learning code.
3. Multi-function 2 button transmitter.
4. Remote arm/disarm/shock disable.
5. Remote trunk release/silent chirp/panic.
6. Error sector report & by-pass.
7. Memory sector report L.E.D indicator.
8. Trigger sector
a. Door input (ne....
Select
The Spec Of Auto Alarm Security : 1. Code hopping system for anti-scanning grabber.
2. Self learning code.
3. Multi-function 2 button transmitter.
4. Remote arm/disarm/shock disable.
5. Remote trunk release/silent chirp/panic.
6. Error sector report & by-pass.
7. Memory sector report L.E.D indicator.
8. Two stage shock sensor (external sh....
Select
The Spec Of Auto Alarm Security : 1. Frequency: 433.92 mhz. (315 mhz & 868 mhz are available)
2. Modulation: fsk.
3. Crystal-based.
4. Output power: 3 dbm. (2 mw)
5. Current consumption: 9 ma.
6. Working voltage: 2.6 ~ 12v.
7. Data rate: 15 k bps.
8. Power down (standby) mode: 1a.
9. Pcb size: 23.3 mm x 30 mm. If has in the specific....
Select
The Spec Of Auto Alarm Security : 1. SAW-based transmitter board with built-in hopping code encoder.
2. Spec:
(1) Frequency: 433.92 MHz (315 MHz & 868 MHz are available).
(2) Modulation: ASK.
(3) SAW-based.
(4) Output power: 10 dBm (10 mW).
(5) Current consumption: 15 mA.
(6) Working voltage: 2.6 ~ 12V.
(7) Data rate: 10 K bps.
(8) Powe....
Select
The Spec Of Auto Alarm Security : 1. Frequency: 433.92 MHz. (315 MHz & 868 MHz are available)
2. Modulation: ASK.
3. Crystal-based.
4. Output power: 10 dBm (10 mW).
5. Current consumption: 8 mA.
6. Working voltage: 4 ~ 13V.
7. Data rate: 25 K bps.
8. Power down (standby) mode: 1A.
9. PCB size: 36 mm x 30 mm.
10. Frequency: 433.92 MHz.....
Select
The Spec Of Auto Alarm Security : 1. Frequency: 433.92 MHz. (315 MHz & 868 MHz are available)
2. Modulation: ASK.
3. Crystal-based.
4. Output power: 10 dBm (10 mW).
5. Current consumption: 8 mA.
6. Working voltage: 4 ~ 13V.
7. Data rate: 25 K bps.
8. Power down (standby) mode: 1A.
9. PCB size: 36 mm x 30 mm.
10. Frequency: 433.92 MHz.....
Select
The Spec Of Auto Alarm Security : 1. Frequency: 433.92 mhz. (315 mhz & 868 mhz are available)
2. Modulation: fsk.
3. Crystal-based.
4. Output power: 10 dbm (10 mw).
5. Current consumption: 14 ma.
6. Working voltage: 4 ~ 13v.
7. Data rate: 25 k bps.
8. Power down (standby) mode: 1 a.
9. Pcb size: 36 mm x 30 mm. If has in the specific....
Select
The Spec Of Auto Alarm Security : 1. SAW-based transmitter board with built-in hopping code encoder.
2. Spec:
(1) Frequency: 433.92 MHz. (315 MHz & 868 MHz are available)
(2) Modulation: ASK.
(3) SAW-based.
(4) Output power: 10 dBm (10 mW).
(5) Current consumption: 15 mA.
(6) Working voltage: 2.6 ~ 12V.
(7) Data rate: 10 K bps.
(8) Pow....
Select
The Spec Of Auto Alarm Security : 1. Crystal-based transmitter board with built-in hopping code encoder.
2. Spec:
(1)Frequency: 433.92 MHz (315 MHz & 868 MHz are available).
(2)Modulation: FSK.
(3)Crystal-based.
(4)Output power: 3 dBm (2 mW).
(5)Current consumption: 9 mA.
(6)Working voltage: 2.6 ~ 12V.
(7)Data rate: 15 K bps.
(8)Power ....
Select
The Spec Of Auto Alarm Security : 1. Frequency: 433.92 mhz. (315 mhz & 868 mhz are available)
2. Modulation: fsk.
3. Crystal-based.
4. Output power: 3 dbm (2 mw).
5. Current consumption: 8 ma.
6. Working voltage: 2.6 ~ 12v.
7. Data rate: 15 k bps.
8. Power down (standby) mode: 1 a.
9. Pcb size: 23.3 mm x 30 mm. If has in the specifi....
Select
The Spec Of Auto Alarm Security : SAM-stabilized design, surface mount RF transmitter, high-performance solution for remote control type applications. It is suitable for use with any ASK receiver available. 1. Frequency: 433.92MHz.
2. Encoder: hopping code.
3. Range: 80 meters.
4. Modulation: AM.
5. Channel: 1.
6. Power: 3 V / alkaline battery....
Select
The Spec Of Auto Alarm Security : LC-stabilized design, surface mount RF transmitter, high-performance solution for remote control type applications. It is suitable for use with any ASK receiver available. 1. Waterproof.
2. Frequency: 433.92MH.
3. Encoder: hopping code.
4. Range: 80 meters.
5. Modulation: AM.
6. Channel: 4.
7. Power: 12 V / a....
Select
The Spec Of Auto Alarm Security : SAW–stabilized design, surface mount RF transmitter, high-performance solution for remote control type applications. It is suitable for use with any ASK receiver available. 1. Waterproof.
2. Frequency: 433.92MH.
3. Encoder: hopping code.
4. Range: 80 meters.
5. Modulation: AM.
6. Channel: 6.
7. Power: 12 V ....