The Spec Of Car Alarm Systems : 1. QuadBand gsm frequency in SMS mode communication.
2. 5 preset phone numbers for event alarm.
3. Shock sensor built in.
4. Listen-in feature.
5. Anti-hijack function.
6. Safety door lock.
7. SOS (option).
8. Easy Installation.
The Spec Of Car Alarm Systems : Features:
1. Original American voice reminder.
2. Enquire the status of your car from telephone & mobile.
3. No distance limit to control your car.
4. Completely automatic operation.
5. Remote open/ close car doors.
6. Remote arm/ disarm the car.
7. Remote monitoring/ talking.
8. Remote police alert/ oil cut-of....
The Spec Of Car Alarm Systems : 1. Active / passive arming selectable.
2. Six-tone, backup or normal siren.
3. Sensors:
(1) Positive trigger.
(2) Ignition.
(3) Es connector.
(4) Valet switch.
(5) Negative trigger / pin switch.
4. Starter / ignition killer.
5. Door lock / unlock output.
6. Automatic defect bypass.
7. Auxiliary negati....
The Spec Of Car Alarm Systems : 1. Backup alarm and flash light.
2. Tone: BI-BI, lambada.
The Spec Of Car Alarm Systems : 1. Two button fixed code transmitter.
2. Self learning code.
3. Multi-function 2 button transmitter.
4. Error sector report.
5. Remote trunk release.
6. Memory sector trigger L.E.D indicator.
7. Trigger sector.
a.Door input (negative).
b.Hood & trunk (negative).
c.Hot wire.
d.Current sen....
The Spec Of Car Alarm Systems : 1. Transponder system.
2. Self learning code.
3. Two way disable cut out (Relay Built-in 40Amp).
4. Security reset.
5. L.E.D indicator.
The Spec Of Car Alarm Systems : 1.Fixed code.
2.Self learning code.
3.One buttons transmitter remote arm/disarm/panic.
4.L.E.S indicator.
5.Trigger sector.
a.Door input(negative).
b.Hot wire.
c.Current sensing(built-in).
d.Shock sensor(built-in).
6.One starter cut out(external 40Amp relay).
7.Remote door lock/unlock(singal ....
The Spec Of Car Alarm Systems : 1. Negative signal output.
2. Ultrasonic movement detectors.
3. For vehicle.
4. Pre-wired female plug.
5. Adjustable sensitivity with L.E.D test indicator.
The Spec Of Car Alarm Systems : 1. Negative signal output.
2. Pre-wired female plug.
3. Adjustable sensitivity with L.E.D test indicator.
The Spec Of Car Alarm Systems : 1. Current sensing on/off.
2. Last auto arm on/off.
3. Auto re-arm on/off.
4. C.D.L output timer with 6 types.
5. Over-ride on/off.
6. Auto lock/unlock on/off.
7. Arming delay timer adjustment.
8. Silent on/off.
9. 4 digital reset code adjustment.
10.Auto arm trigger ACC/full.
11.Car-jack on/off.
....
The Spec Of Car Alarm Systems : 1. Code hopping system for anti-scanning grabber.
2. Self learing code.
3. Multi-function 2 button transmitter.
4. Remote arm/disarm.
5. Remote trunk release.
6. Error sector report & by-pass.
7. Memory sector report L.E.D indicato.r
8. Trigger sector.
a. Door input (negative).
b. Hood & trunk(ne....
The Spec Of Car Alarm Systems : 1. One button fixed code transmitter.
2. One piece contour.
3. Self learning code.
4. Remote CH-1=arm/disarm/2 seconds for panic.
5. Trigger sector.
a. Door (negative).
b. Hot-wire.
c. Shock sensor (built-in).
d. Current sensor.
6. Last auto arm.
7. Auto re-arm.
8. Head light.
9. Rem....
The Spec Of Car Alarm Systems : 1. Two button fixed code transmitter.
2. Mini-one piece contour.
3. Self learning code.
4. Trigger sector.
a. Door (negative).
b. Hot-wire.
c. Shock sensor (built-in).
d. Current sensor.
5. Last auto arm.
6. Auto re-arm.
7. Dual parking lights(relay built-in).
8. Remote door lock/unloc....
The Spec Of Car Alarm Systems : 1. One button fixed code transmitter.
2. Self learning code.
3. Remote CH-1=arm/disarm/2 sec for panic.
4. Trigger sector.
a. door (negative).
b. current sensor.
c. hot-wire.
5. Remote door lock/unlock singal output.
6. Auto lock/unlock.
7. Siren output.
8. One starter cut out (signal).
9.....
The Spec Of Car Alarm Systems : 1. Code hopping system for anti-scanning grabber.
2. Self learing code.
3. Multi-function 2 button transmitter.
4. Remote arm/disarm.
5. Remote trunk release.
6. Error sector report & by-pass.
7. Memory sector report L.E.D indicator.
8. Two stage shock sensor.
9. Trigger sector.
a. Door input (negat....
The Spec Of Car Alarm Systems : 1. Code hopping system for anti-scanning grabber.
2. Self learning code.
3. Multi-function 2 button transmitter.
4. Remote arm/disarm.
5. Remote trunk release.
6. Error sector report & by-pass.
7. Memory sector report L.E.D indicator.
8. Two stage shock sensor.
9.Trigger sector.
a.Door input(negativ....
The Spec Of Car Alarm Systems : 1. Code hopping system for anti-scanning grabber.
2. Self learing code.
3. Remote active arm/disarm.
4. Remote trunk release.
5. Error sector report & by-pass.
6. Memory sector trigger report L.E.D indicator.
7. Two stage.
8. Trigger sector.
a. Door input (negative).
b. Hood & trunk input (negat....
The Spec Of Car Alarm Systems : 1. Code hopping system for anti-scanning grabber.
2. Self learning code.
3. Multi-function 2 button trandmitter.
4. Remote arm/disarm/shock disable.
5. Remote trunk release/silent chirp/panic.
6. Error sector report & by-pass.
7. Memory sector report L.E.D indicator.
8. Two stage shock sensor (external sh....
The Spec Of Car Alarm Systems : 1. Code hopping system for anti-scanning grabber.
2. Self learning code.
3. Multi-function 2 button transmitter.
4. Remote arm/disarm/shock disable.
5. Remote trunk release/silent chirp/panic.
6. Error sector report & by-pass.
7. Memory sector report L.E.D indicator.
8. Trigger sector
a. Door input (ne....
The Spec Of Car Alarm Systems : 1. Code hopping system for anti-scanning grabber.
2. Self learning code.
3. Multi-function 2 button transmitter.
4. Remote arm/disarm/shock disable.
5. Remote trunk release/silent chirp/panic.
6. Error sector report & by-pass.
7. Memory sector report L.E.D indicator.
8. Two stage shock sensor (external sh....
The Spec Of Car Alarm Systems : 1. Frequency: 433.92 mhz. (315 mhz & 868 mhz are available)
2. Modulation: fsk.
3. Crystal-based.
4. Output power: 3 dbm. (2 mw)
5. Current consumption: 9 ma.
6. Working voltage: 2.6 ~ 12v.
7. Data rate: 15 k bps.
8. Power down (standby) mode: 1a.
9. Pcb size: 23.3 mm x 30 mm.
The Spec Of Car Alarm Systems : 1. SAW-based transmitter board with built-in hopping code encoder.
2. Spec:
(1) Frequency: 433.92 MHz (315 MHz & 868 MHz are available).
(2) Modulation: ASK.
(3) SAW-based.
(4) Output power: 10 dBm (10 mW).
(5) Current consumption: 15 mA.
(6) Working voltage: 2.6 ~ 12V.
(7) Data rate: 10 K bps.
(8) Powe....
The Spec Of Car Alarm Systems : 1. Frequency: 433.92 MHz. (315 MHz & 868 MHz are available)
2. Modulation: ASK.
3. Crystal-based.
4. Output power: 10 dBm (10 mW).
5. Current consumption: 8 mA.
6. Working voltage: 4 ~ 13V.
7. Data rate: 25 K bps.
8. Power down (standby) mode: 1A.
9. PCB size: 36 mm x 30 mm.
10. Frequency: 433.92 MHz.....
The Spec Of Car Alarm Systems : 1. Frequency: 433.92 MHz. (315 MHz & 868 MHz are available)
2. Modulation: ASK.
3. Crystal-based.
4. Output power: 10 dBm (10 mW).
5. Current consumption: 8 mA.
6. Working voltage: 4 ~ 13V.
7. Data rate: 25 K bps.
8. Power down (standby) mode: 1A.
9. PCB size: 36 mm x 30 mm.
10. Frequency: 433.92 MHz.....
The Spec Of Car Alarm Systems : 1. Frequency: 433.92 mhz. (315 mhz & 868 mhz are available)
2. Modulation: fsk.
3. Crystal-based.
4. Output power: 10 dbm (10 mw).
5. Current consumption: 14 ma.
6. Working voltage: 4 ~ 13v.
7. Data rate: 25 k bps.
8. Power down (standby) mode: 1 a.
9. Pcb size: 36 mm x 30 mm.
The Spec Of Car Alarm Systems : 1. SAW-based transmitter board with built-in hopping code encoder.
2. Spec:
(1) Frequency: 433.92 MHz. (315 MHz & 868 MHz are available)
(2) Modulation: ASK.
(3) SAW-based.
(4) Output power: 10 dBm (10 mW).
(5) Current consumption: 15 mA.
(6) Working voltage: 2.6 ~ 12V.
(7) Data rate: 10 K bps.
(8) Pow....
The Spec Of Car Alarm Systems : 1. Crystal-based transmitter board with built-in hopping code encoder.
2. Spec:
(1)Frequency: 433.92 MHz (315 MHz & 868 MHz are available).
(2)Modulation: FSK.
(3)Crystal-based.
(4)Output power: 3 dBm (2 mW).
(5)Current consumption: 9 mA.
(6)Working voltage: 2.6 ~ 12V.
(7)Data rate: 15 K bps.
(8)Power ....
The Spec Of Car Alarm Systems : 1. Frequency: 433.92 mhz. (315 mhz & 868 mhz are available)
2. Modulation: fsk.
3. Crystal-based.
4. Output power: 3 dbm (2 mw).
5. Current consumption: 8 ma.
6. Working voltage: 2.6 ~ 12v.
7. Data rate: 15 k bps.
8. Power down (standby) mode: 1 a.
9. Pcb size: 23.3 mm x 30 mm.
The Spec Of Car Alarm Systems : SAM-stabilized design, surface mount RF transmitter, high-performance solution for remote control type applications. It is suitable for use with any ASK receiver available.
The Spec Of Car Alarm Systems : LC-stabilized design, surface mount RF transmitter, high-performance solution for remote control type applications. It is suitable for use with any ASK receiver available.
