The Spec Of Horizontal Machining Centers : 1. Rapid federate:
(1) 3-axes cutting feedrate(mm/min): 1~4000.
(2) 3-axes guideways: X.Y.Z Linear way.
(3) 3-axes rapid feedrate(m/min): X.Y-12, Z-8.
2. Motor:
(1) Spindle motor(kw): 15 / 18.5.
(2) X, Y, Z servo motor(kw): 22 / 3kw(Y axis with brake); 22 3kw (Y axis with brake).
(3) Coolant pump:....
The Spec Of Horizontal Machining Centers : The A-series has the highest cutting tool capacity and is built for extremely intricate processing. The high speed spindle is ideal for cavity machining and precision engraving. Fully automatic full rotation, high speed, high precision.
The Spec Of Horizontal Machining Centers : 1. Besides nose type headstock, the quill system ensures a good accessibility to the work.
VAC motor driver for spindle continuously adjust the spindle rotational speed even during the cutting operation, so that best cutting conditions can be readily obtained.
The multi-drive system of one motor/axis for each feed ....
The Spec Of Horizontal Machining Centers : 1. Travel:
(1) X axis travel: 850mm.
(2) Y axis travel: 700mm.
(3) Z axis travel: 600mm.
2. Spindle:
(1) Spindle center to table surface: 0-600mm.
(2) Spindle nose To table center: 200-600mm.
(3) Spindle speed: 8000rpm.
(4) Spindle taper: BT 40/CAT 40.
3. Table:
(1) Table size: 600 x 1000mm.
(2) Load on tabl....
The Spec Of Horizontal Machining Centers : Special accessory:
1. Variable speed feeding for milling head (Inverter).
2. Colling air spray head.
3. X,Y,Z-axis Digital readout.
4. NC-control system.
The Spec Of Horizontal Machining Centers : Spindle:
1. Spindle taper: No.50.
2. Spindle speed: 10~6,000rpm(7,000/8,000OPT).
Table:
1. Table size: 3,000mm x 2,000mm (118.1"x78.7").
2. Maximum table load: 10,000kgs(22,000lbs).
3. T-slot configuration: 28mm x 9.
The Spec Of Horizontal Machining Centers : 1. Table dimensions(mm): 630 x 630 x 1°.
2. T-slots(mm): CD100 x 18 x 5 slots.
3. Max. loading: 1200kg.
4. Travel:
(1) Max. travel(mm): 1000 x 650 x 750.
(2) Spindle nose to work table surface(mm): 215-965.
(3) Spindle center to slideways(mm): 120-770.
5. Spindle:
(1) Sidle taper: BT50.
(2) Spindle diamet....
The Spec Of Horizontal Machining Centers : 1. Travel:
(1) X-axis travel(mm)： 1000.
(2) Y-axis travel(mm)： 650.
(3) Z-axis travel(mm)： 750.
2. Spindle nose to work table surface(mm)： 215 - 965.
3. Spindle center to work table(mm)： 260 - 910.
4. Spindle:
(1) Sidle taper： BT50.
(2) Spindle speed(rpm)： 45~4500(ST).
5. Rapid feedrat....
The Spec Of Horizontal Machining Centers : Model: JY-MH500A.
(1) Table dimensions (mm): 500 x 500 x 1o.
(2) T-slots (mm): CD100 x 18 x 5 slots.
(3) Max. loading (kg): 800.
The Spec Of Horizontal Machining Centers : 1. Table:
(1) Work area (mm): 800x800x1.
(2) T-slot (mmxT): 100x18x6T.
(3) Max. loading (kgs): 1200.
2. Travel:
(1) Three axes travel (mm): 1000x650x750.
(2) Spindle nose to work table surface (mm): 215~965.
(3) Spindle center to cloumn slide ways (mm): 120~770.
3. Spindle:
(1) Spindle taper: BT50.....
The Spec Of Horizontal Machining Centers : 1. Table:
(1) Table size (mm): 1000x750.
(2) T-slot: CD100 x 18mm x 5T.
(3) Max. loading (kgs): 1200.
(4) Divide angle: STD1°(OPT0.001°).
2. Travel:
(1) X, Y, Z-axes travel (mm): 1000x650x750.
(2) Spindle nose to work table (mm): 215-965.
(3) Spindle center to work table (mm): 120-770.
3. Spindle:
(1) Spind....
The Spec Of Horizontal Machining Centers : 1. Travel:
(1) X axis travel: 850mm.
(2) Y axis travel: 700mm.
(3) Z axis travel: 600mm.
(4) B axis: 360°.
2. Spindle:
(1) Spindle center to Table surface: 0-600mm.
(2) Spindle nose to Table center: 200-600mm.
(3) Spindle Speed: 8,000 rpm.
(4) Spindle taper: BT 40/CAT 40.
3. Table:
(1) Rotary indexer: 500 ....
The Spec Of Horizontal Machining Centers : 1. Travel:
(1) X axis travel: 850mm.
(2) Y axis travel: 700mm.
(3) Z axis travel: 600mm.
(4) B axis: 360°.
2. Spindle:
(1) Spindle center to table surface: 0-600mm.
(2) Spindle nose to table center: 200-600mm.
(3) Spindle speed: 8,000 rpm.
(4) Spindle taper: BT 40 / CAT 40.
3. Table:
(1) Pallet size: 2 x 50....
The Spec Of Horizontal Machining Centers : Spindle:
1. Spindle taper: No.50.
2. Spindle speed: 10~6,000rpm(7,000/8,000OPT).
Table:
1. Table size: 4,000x2,000mm (157.4"x78.7").
2. Maximum table load: 10,000kgs(22,000lbs).
3. T-slot configuration: 28mm x 9.
The Spec Of Horizontal Machining Centers : Spindle:
1. Spindle taper: BT50/CAT50.
2. Spindle speed: 6000rpm(opt.8000rpm).
Table:
1. Table size: 3,000mm x 1,500mm (118.1"x59").
2. Maximum table load: 8,000kgs(17,600lbs).
3. T-slot configuration: 7x22mmx200mm.
The Spec Of Horizontal Machining Centers : 1. Model: JMH-500(NO40.).
(1) X-travel: 800 (31.50").
(2) Y-travel: 725 (28.54").
(3) Z-travel: 725 (28.54").
(4) Spindle center to table surface: mm (in.) 50~775 (1.97"~30.51").
(5) Spindle nose to table center: mm (in.) 150~875 (5.91"~34.45").
(6) Table surface to floot: mm (i....
The Spec Of Horizontal Machining Centers : The R-series has a simple structure which is designed to maximize product quality. It yields high output, takes up minimal floor space, is easy to operate and is highly stable.
The Spec Of Horizontal Machining Centers : The s series machine features fully traveling column, double swing tables, and highly rigid machine structure.
The Spec Of Horizontal Machining Centers : The A-series has the highest cutting tool capacity and is built for extremely intricate processing. The high speed spindle is ideal for cavity machining and precision engraving. Fully automatic full rotation, high speed, high precision.
The Spec Of Horizontal Machining Centers : The R-series has a simple structure which is designed to maximize product quality. It yields high output, takes up minimal floor space, is easy to operate and is highly stable.
The Spec Of Horizontal Machining Centers : The R-series has a simple structure which is designed to maximize product quality. It yields high output, takes up minimal floor space, is easy to operate and is highly stable.
The Spec Of Horizontal Machining Centers : The R-series has a simple structure which is designed to maximize product quality. It yields high output, takes up minimal floor space, is easy to operate and is highly stable.
The Spec Of Horizontal Machining Centers : 1. High speed spindle.
2. High response servo system.
3. High speed 3 axes rapid traverse.
The Spec Of Horizontal Machining Centers : The R-series has a simple structure which is designed to maximize product quality. It yields high output, takes up minimal floor space, is easy to operate and is highly stable.
The Spec Of Horizontal Machining Centers : The A-series has the highest cutting tool capacity and is built for extremely intricate processing. The high speed spindle is ideal for cavity machining and precision engraving. Fully automatic full rotation, high speed, high precision.
The Spec Of Horizontal Machining Centers : The A-series has the highest cutting tool capacity and is built for extremely intricate processing. The high speed spindle is ideal for cavity machining and precision engraving. Fully automatic full rotation, high speed, high precision.
The Spec Of Horizontal Machining Centers : Spindle:
1. Spindle taper: No.50.
2. Spindle speed: 10~6,000rpm(7,000/8,000OPT).
Table:
1. Table size: 3,000mm x 1,500mm (118.1"x59").
2. Maximum table load: 8,000kgs(17,600lbs).
3. T-slot configuration: 22mm x 7.
