The Spec Of Machine Centers : It fits in working big workpieces of molding drilling field and fits in column NC drilling.
The Spec Of Machine Centers : 1. We offer waterjet cutting service.
2. Our workshop has OMAX waterjet cutting machine model 55100, which provide professional, precise and fast waterjet cutting service.
3. OMAX 55100 jetmachining center.
4. Precision machining workhorse: from prototypes to production runs, create parts in a variety of materials i....
The Spec Of Machine Centers : 1. Rapid federate:
(1) 3-axes cutting feedrate(mm/min): 1~4000.
(2) 3-axes guideways: X.Y.Z Linear way.
(3) 3-axes rapid feedrate(m/min): X.Y-12, Z-8.
2. Motor:
(1) Spindle motor(kw): 15 / 18.5.
(2) X, Y, Z servo motor(kw): 22 / 3kw(Y axis with brake); 22 3kw (Y axis with brake).
(3) Coolant pump:....
The Spec Of Machine Centers : 1.
(1) Spindle speeds: 8000RPM (optional 12000RPM).
(2) Rigid tapping up to 6000RPM.
(3) Direct drive spindle motor system provides minimum power loss of transmission and stable running performance.
2.
(1) 3-axes rapid travels: 48m/min.
(2) Tool loading capacity: 24 tools.
(3) Special single piece of X-axis cov....
The Spec Of Machine Centers : The A-series has the highest cutting tool capacity and is built for extremely intricate processing. The high speed spindle is ideal for cavity machining and precision engraving. Fully automatic full rotation, high speed, high precision.
The Spec Of Machine Centers : 1. Broad base setting enables saddle and working table not to move out of the base to cause overhang when cutting action is in progress.
2. The standardization and modulization design can let customer choose all three axes linear way, all three axes box way or even two axes linear way and one axis box way, etc.
3. O....
The Spec Of Machine Centers : 1. 1250 x 720 x 610 mm travel (X -Y - Z).
2. 20 HP high power spindle motor.
3. Table size 700 x 1350 mm.
4. BT40/8,000 RPM spindle.
5. 20m/min rapid speed.
6. Solid box y-axis 4-way construction.
7. Integrated chip auger.
8. Standard umbrella type ATC (20 Tools).
9. High speed arm type ATC available (24 or 40 ....
The Spec Of Machine Centers : 1. High-quality linear guideways are professionally mounted and adjusted to guarantee superior feed accuracy and long service life.
Utilizes maxmill high-speed technology with advanced servo mechanisms and a direct drive spindle.
2. High speed (15,000 RPM) and high revolution accuracy, low noise, minimum vibration ....
The Spec Of Machine Centers : 1. X 1300mm (51.2")/Y 650mm (25.6")/Z 650mm (25.6").
2. 24 tool magazine (BT-50, CAT-40).
3. 6,000 RPM spindle speed.
The Spec Of Machine Centers : 1. Mehanite cast.
2. Taiwan C3 grade sealed ball, leading screw, spindle.
3. Every machine is checked by Renishaw laser and ball bar.
4. Control system: Fanuc, Mitsubishi.
5. The fourth axis is optional.
6. 16 pcs tool magazine is optional.
7. X, Y axis hard ways.
8. Lineral way and high speed are available.
The Spec Of Machine Centers : Hardware features: supporting high precision and reliability.
1. V-shaped base structure with high rigidity designs, allowing wide guide-way maintaining best optimum dynamic precision massive feed in.
2. Super-sized column structure and big cross beam support, giving the best rigid structure.
3. Ruggedly constructed....
The Spec Of Machine Centers : High-rigidity structure:
1. All three axes have a hardened box-way design . In addition, the spindle headstock, cloumn, saddle, base, and table are all made of high-quality meehanite cast iron.
2. All slide-ways are heat-treated and precision ground to maintain high precision.
3. Double guide-ways and a counter-ba....
The Spec Of Machine Centers : 1. Ruggedly constructed 4 boxway base and box type structure on other major parts for outstanding rigidity and stability.
2. Precision scraping assures long term accuracy and maximum wear resistance.
3. The axis motor are directly coupled to the ball-screw, it ensures the least backlash and long lasting accuracy.
4.....
The Spec Of Machine Centers : 1. Standard accessories:
(1) Built–in spindle.
(2) Full cover.
(3) Blowing device for spindle.
(4) Spindle coolant system.
(5) Auto. lubrication system.
(6) Cutting oil coolant device.
(7) Water gun, side–way air blower, work lamp.
(8) Hand-on type operation box/ 26 pin hand wheel.
(9) RS232 9 pin interfa....
The Spec Of Machine Centers : 1. Extra long tailstock quill travel.
2. 1 second for tool change (adjacent).
3. 60" slant bed.
The Spec Of Machine Centers : 1. X / Y / Z axex travel: 1700/1200/750 mm.
2. Table size (LXW): 1600X1050 mm.
The Spec Of Machine Centers : 1. The major structures are manufactured from Meehanite cast iron, stress relieved and combined with scientific rib reinforcement to ensure deformation-free operations.
2. Increased width on the column bottom with box-type structure provides maximum stability especially when performing high-speed cutting.
3. Linear....
The Spec Of Machine Centers : 1. 4 Processes in 1 Machine (cutting, chamfering, washing, length measuring)
2. The one and only complete processing cell for tubes and bars, the SA-65/2+MB6 offers multiple machining processes built-in-one:
(1) Cutting.
(2) Chamfering / centering / threading / milling.
(3) Air blow or fluid washing.
(4) Length m....
The Spec Of Machine Centers : Table:
1. Table surface size: 254x508mm (10”x20).
2. T slots (W x N x P): 14x3x77.5mm (0.55”x3x3).
3. Table max. load: 100kgs/220lbs.
The Spec Of Machine Centers : 1. 70 series do have four box guide ways to achieve the most rigid support for X- and Y- axis.
2. Unique lubrication technique of gibs and automatic lubrication system assures high accuracy for a long time.
3. An oil cooler for spindle cooling is standard equipment on the machine. This cooler works with room temperat....
The Spec Of Machine Centers : 1. Extremely rigid cast construction:
(1) The main castings including the bed, column, saddle, and table are constructed from hing quality Meehanite castings.
(2) The casting is calculated by computerized limited ultimate analysis, combined with reasonable structure strength and reinforced ribs to provide high rigidn....
The Spec Of Machine Centers : 1. Table dimensions(mm): 630 x 630 x 1°.
2. T-slots(mm): CD100 x 18 x 5 slots.
3. Max. loading: 1200kg.
4. Travel:
(1) Max. travel(mm): 1000 x 650 x 750.
(2) Spindle nose to work table surface(mm): 215-965.
(3) Spindle center to slideways(mm): 120-770.
5. Spindle:
(1) Sidle taper: BT50.
(2) Spindle diamet....
The Spec Of Machine Centers : 1. Travel:
(1) X-axis travel(mm)： 1000.
(2) Y-axis travel(mm)： 650.
(3) Z-axis travel(mm)： 750.
2. Spindle nose to work table surface(mm)： 215 - 965.
3. Spindle center to work table(mm)： 260 - 910.
4. Spindle:
(1) Sidle taper： BT50.
(2) Spindle speed(rpm)： 45~4500(ST).
5. Rapid feedrat....
The Spec Of Machine Centers : 1. X-axis travel: 2200 mm.
2. Y-axis travel: 2300 mm.
3. Z-axis travel: 920 mm.
4. Working surface: 2200 x 2050 mm.
The Spec Of Machine Centers : 1. X-axis travel: 570 mm.
2. Y-axis travel: 510 mm.
3. Z-axis travel: 520 mm.
4. Spindle speed: 10000 rpm.
5. Spindle motor: 11 kw.
The Spec Of Machine Centers : 1. X-axis travel: 1100 mm.
2. Y-axis travel: 610 mm.
3. Z-axis travel: 610 mm.
The Spec Of Machine Centers : Vertical machining center.
The Spec Of Machine Centers : 1. X-axis travel: 2040 mm.
2. Y-axis travel: 915 mm.
3. Z-axis travel: 600 mm.
The Spec Of Machine Centers : 1. X 1100mm(43.3")/Y 550mm (21.6")/Z 510mm (20.1").
2. 24 tool magazine (BT-40, CAT-40).
The Spec Of Machine Centers : Description of standard accessories:
1. Full length enclosure VMC-84, VMC-115.
2. Splash table guard VMC-136, VMC-158, VMC-199, VMC-229, AF-8.
3. Remote manual pulse generator (M.P.G.).
4. Oil & coolant separator.
5. Automatic lubrication system.
6. Taper air through spindle.
7. collant unit.
8. Spindl....
