The Spec Of Vertical Machining Center : SV series vertical machining centre is designed for Mold & Die Industry. 3 axes are adopted roller type linear guide ways to realize the best reliability and to ensure the highest performance on speed, precision, and rigid cutting requirements. Combining surface between spindle and motor are through scraping to ens....
The Spec Of Vertical Machining Center : * Finite element analysis
* The extra-wide and extremely stable base has 2 Box ways providing * solid support for the entire machine.
* High speed and precision ball screw.
* High rigidity spindle.
* Rugged base and saddle.
* Stability ATC system. (Auto tool change)
The Spec Of Vertical Machining Center : 1.Z-axis acceleration 0.75G minimizes tool changeover time.
2.Rapid feed 42/42/42 m/min minimizes non-cutting time.
3.Directly-coupled 12000rpm spindle assures part surface finish.
4.Supreme rigid column increases milling & tapping efficiency.
5.Easy access to working area and perfect swarf and coolant disposal....
The Spec Of Vertical Machining Center : * X, Y, Z-axis travel 800 x 500 x 550 mm.
* BT40 spindle taper.
* 8000 rpm belt drive spindle.
* 2 box ways on base.
* Choice of arm type or armless type automatic tool changer.
* Fully enclosed splash guard.
* Fanuc / Mitsubishi control system.
* Spindle oil cooler is standard equipment.
The Spec Of Vertical Machining Center : * The NEW EM Series is a high-speed VMC with a cost savings that hammers the competition. It delivers more bang for your buck and increases your production capabilities. The series is engineered with efficiency to satisfy the need for large quantity machining. Chose from three models: EM1620L, EM2033L and EM2040L.
* ....
The Spec Of Vertical Machining Center : *7APC
*EROWA UPC chuck
*Spindle water cooler
*M&H touch probe and HDR
*BLUM tool off set
*Voltage: 400V YOM: 2003Model: HSM400Controller: HEIDENHAIN 530iTNCX/Y/Z axis travel: 400/450/350mmSpindle speed: 42,000rpm (built-in)HSK E40 ....
The Spec Of Vertical Machining Center : * 12”×50” table.
* 5HP inverter motor.
* NST#40 spindle.
* Turcite-B coated on XY slide-way & gibs.
* XYZ slide-ways, table and T-slot are hardened and ground.
* X&Y motor bracket protect axis motors from damage.
* Precision ground ball screws on XYZ, provide high precision movement and reduce heat d....
The Spec Of Vertical Machining Center : •Main body casting iron adopt Meehanite Iron to ensure its high quality and long machine life.
•Box style designed main body structure with reversed “Y” type big span vertical column to greatly enhance the rigidity and stability of machine itself.
•Three axes adopt linear guide way having high rigidity, low....
The Spec Of Vertical Machining Center : Standard Accessories:
*Spindle air blast
*Auto lubrication system
*Coolant system
*Auto power off
*RS-232 port
*Work light
*16 Tools armless type ATC
*Splash guard
*Tool box & tools
*Inspection report
*Operation, Programming & Maintenance Manuals, Model:VMC-650ETable Size:800 x 450 mm(33.5 x 17.7....
The Spec Of Vertical Machining Center : Features :
*The column is made out of box shape high tensile strength casting reinforced with honeycombed ribbings. It offers excellent vibration
dampening features and great mechanical and thermal stability.
*The saddle and vertical head travels on hardened and precision ground box ways that offer maximum rigidity....
The Spec Of Vertical Machining Center : 1. 1250 x 720 x 610 mm travel (X -Y - Z).
2. 20 HP high power spindle motor.
3. Table size 700 x 1350 mm.
4. BT40/8,000 RPM spindle.
5. 20m/min rapid speed.
6. Solid box y-axis 4-way construction.
7. Integrated chip auger.
8. Standard umbrella type ATC (20 Tools).
9. High speed arm type ATC available (24 or 40 ....
The Spec Of Vertical Machining Center : 1. High-quality linear guideways are professionally mounted and adjusted to guarantee superior feed accuracy and long service life.
Utilizes maxmill high-speed technology with advanced servo mechanisms and a direct drive spindle.
2. High speed (15,000 RPM) and high revolution accuracy, low noise, minimum vibration ....
The Spec Of Vertical Machining Center : 1. Standard accessories:
(1) Built–in spindle.
(2) Full cover.
(3) Blowing device for spindle.
(4) Spindle coolant system.
(5) Auto. lubrication system.
(6) Cutting oil coolant device.
(7) Water gun, side–way air blower, work lamp.
(8) Hand-on type operation box/ 26 pin hand wheel.
(9) RS232 9 pin interfa....
The Spec Of Vertical Machining Center : Arched-Type Vertical Machining Center Casting is one of our selected vertical machining centers. Material:GC275Weight:3800kgs ....
The Spec Of Vertical Machining Center : 1. Fully enclosed splash guard .
2. Armless type ATC standard .
3. Cam type ATC optional .
4. Linear roller guideways on 3 axes.
5. Lube / coolant separation .
6. Specially designed floating cushion tool retractor prevents damage to spindle bearings .
7. Spindle speed 50 - 8000 RPM.
8. Cutting feedrate up to 8....
The Spec Of Vertical Machining Center : 1. Mehanite cast.
2. Taiwan C3 grade sealed ball, leading screw, spindle.
3. Every machine is checked by Renishaw laser and ball bar.
4. Control system: Fanuc, Mitsubishi.
5. The fourth axis is optional.
6. 16 pcs tool magazine is optional.
7. X, Y axis hard ways.
8. Lineral way and high speed are available.
The Spec Of Vertical Machining Center : 1. For continuous and very high spindle speeds, the spindle cooling system efficiently takes away spindle heat, reduces spindle thermal deformation and ensures high speed accuracy.
2. The automatic tool length measuring system can measure and offset the tool length data onto the CNC controller automatically.
3. The c....
The Spec Of Vertical Machining Center : 1. Ultra-wide A-shaped Column Design
2. Full support Base Design
3. Ultra-wide Y-axis Design
VMC Superior Body Structure-
The casting body is the box structure, which has the feature of high rigidity. The golden structure can strengthen the support to machine and bear the heavy loading and cutting and also increa....
The Spec Of Vertical Machining Center : Increased width on the column bottom, combined with box type structure, greatly upgrades rigidity and stability during machining.
Box slide ways on the 3 axes are high frequency hardened. Way surfaces are coated with Turcite-B and precision scraped.
Extra wide slide ways and distance between slide ways and distance b....
The Spec Of Vertical Machining Center : ECOM Machine Common Feature：
1. Major structural components of the ECOM machine utilize MEEHANITE cast iron to provide maximum stability. All structural components are tempered and stress relieved. Major structural components are analyzed and designed using advanced finite element analysis (FEM). This allows except....
The Spec Of Vertical Machining Center : 1. The major structures are manufactured from Meehanite cast iron, stress relieved and combined with scientific rib reinforcement to ensure deformation-free operations.
2. Increased width on the column bottom with box-type structure provides maximum stability especially when performing high-speed cutting.
3. Linear....
The Spec Of Vertical Machining Center : 1. Enclosed splash guard.
2. Flat type chip conveyor.
3. Chip wagon.
4. Rotary table with 4th axis control.
5. 4th axis connector.
6. Coolant through tool.
7. Automatic tool length measuring device.
8. Coolant through spindle with filter.
9. Coolant wash.
10. Automatic centering device.
11. Cam mechanism AT....
The Spec Of Vertical Machining Center : *Chip conveyor and bucket
*Coolant thru. tool tip YOM: 2011Model: NTX1000HSCController: FANUC 31iB5Max. swing dia.: Ø370mmSwing over cross slide: Ø370mmX/Y/Z axis travel: 380/±105/460+155mmMain spindle speed: 6,000rpmMain spindle indexing: 0.0001゜Sub spindle speed: 6,000rpmSub spindle indexi....
The Spec Of Vertical Machining Center : *X/Y axes roller linear guide way
*Z axis boxway
*Spindle oil cooler
*Tool off set
*Coolant thru. spindle
*Part setter (Renishaw RMP60)
*Oil mist collector x2sets
*Oil skimmer
*Chip conveyor and bucket YOM: 2008Model: DMC-5000Controller: FANUC 18iMBX/Y/Z axis travel: 5,000/4,100/1,000mmDist. between column....
The Spec Of Vertical Machining Center : *3 axes linear scale
*Air conditioner for electrical cabinet
*Oil skimmer
*Chip conveyor YOM: Nov. 2011Model: FG-1210Controller: FANUC 18i-MBX/Y/Z axis travel: 1200/1000/650mmTable size: 1210x1000mmDist. from spindle nose to table: 120-700mmSpindle speed: 15,000rpm (Built-in Type)BBT4020ATC ....
The Spec Of Vertical Machining Center : High reliability VTL with turning diameter 1000mm：
Following the success of our Vturn-V760, with a swing diameter of 1100mm (43.3 inch) and a maximum turning diameter of 1000mm (39.4 inch), the VTL Vturn-V1000 with its powerful 45kW (60HP) spindle motor coupled to a 2 step Gearbox provides high torque at low rpm'....
The Spec Of Vertical Machining Center : The Sister is a comactly constructed vertical machining center with high spindle speed and fast feed. This machine is especially designed for companies who use high speed machining for precision molds and parts.
The Spec Of Vertical Machining Center : *Arm-type ATC
Twin arm type ATC (Automatic Tool Changer) performs better overall continuous tool changes compared with disc type tool changer, while at the same time offering faster tool change - merely 3.5 seconds with BT-40 or CT-40 tooling.
*Japanese-made linear motion guideways
Meehanite® casting
All major s....
The Spec Of Vertical Machining Center : *Large Z-axis travel preferable for tilting table
*Long overhang for headstock on A-series Vcenters.
*Fixed column C-framed VMC with high rigidity for heavy cutting
*Tilting table diameter 350mm with Roller cam drive (roller-gear mechanism) guarantees high reliability without backlash for long service life.
The Spec Of Vertical Machining Center : DV series is designed for heavy cutting requirements. All the main casting parts are made from Meehanite level cast iron with one-piece design. 4 box way of bed offers more support ability to ensure the best performance on loading and rigid ability during heavy cutting. All guide ways are through heat treatment to meet....
The Spec Of Vertical Machining Center : With 2-axis Rotary Table Engineered for Machining Complex-shaped Workpieces Chevalier´s NEW QP5X-400 5-Axis, high-speed VMC features 5-axis simultaneous or 4+1 axis applications. The standard machine is fitted with 2-axis rotary table size Ø320mm (12.6"). Better accuracy, more productivity, less manpower, higher....
The Spec Of Vertical Machining Center : STRUCTURE
The major parts on this series are constructed of high-quality robust FC30 Meehanite castings, haedened to over HRB190 and tempered to relieve stress.
SPINDLE HEAD
A box-shape construction design on spindle head, providing high rigidity to increase cutting ability.
BALLSCREW
3 axes are equipped with ....
The Spec Of Vertical Machining Center : ‧10”×54” table
‧5HP spindle motor (5HP inverter motor by optional).
‧NST#40 spindle
‧Turcite-B coated on XY slide-way & gibs.
‧Hardened and ground on XY
‧Slide-ways & table
‧Square way on Y axis & column.
‧Grinding on table T-slot
‧Dia. 1-1/2”(38mm) lifting screw.
‧Ball-s....
The Spec Of Vertical Machining Center : Victor design one new vertical lathe Vturn-560 to meet higher roundness requirement for auto parts.
* Compact space floor requirement for easier cell layout in the factory
* Ergonomic design for easy loading and unloading for operators
* High roundness and surface finish without gravity effect on the turning proce....
The Spec Of Vertical Machining Center : Standard Accessories:
*24-tools arm type ATC
*BT #50 spindle & ATC, belt driven headstock
*Programmable coolant system
*Automatic lubrication system
*Spindle air blast system
*Pre-extension ballscrews
*Screw chip conveyor rear side of saddle
*Remote MPG
*RS-232C
*Operation status light
*Work light
*Tool....
The Spec Of Vertical Machining Center : Standard Accessories:
*Water gun & air gun
*Work light
*Full splash guard
*3 axes telescope steel cover
*Coolant & chip flushing system
*Operation status light
*Chip conveyor
*Remote MPG
*Heat exchanger for electrical cabinet
*Rigid tapping
*Coolant & Auto lubrication system
*Tool box & tool....
The Spec Of Vertical Machining Center : 1.Main body casting iron adopt Meehanite Iron to ensure its high quality and long machine life.
2.Box style designed main body structure with reversed "Y" type big span vertical column to greatly enhance the rigidity and stability of machine itself.
3.Three axes adopt box guide way suitable with heavy loadi....
The Spec Of Vertical Machining Center : * The machine body is made of high grade mechanist cast iron rousted, superior of material quality.
* The step variable speed spindle which adopt the German made P4 grade bearings, low noise, great of power output and the transmitting belt is not wasted during in heavy duty processing.
* The slide-way is hardened by ....
