The Spec Of Milling Centers : 1. Integrated automatic lubricating system.
2. Cooling system.
3. Each travel axis is equipped with limit switches to ensure safety.
4. Slide surface lies been treated with hardening, the rigid construction to ensure machine an stable performance.
5. The x, y axis slideways coated with low-friction property materia....
The Spec Of Milling Centers : 1. Fully digital package control to provide high accuracy & high reliability.
2. Massive meehanite cast iron for rigidity.
3. Turcite surfaces + Hardened/ground slide way.
4. Auto power off.
The Spec Of Milling Centers : 1. Three-axis simul taneous feed and rapid traverse: instead of having each axis driven by a separate tiny motor, MILL uses a single powerful 3 H.P. motor to drive all three axes. This means you can be simultaneous feeds or rapid traverse on the table and the knee. The availability of power-feed on the knee (in additio....
The Spec Of Milling Centers : Model No: KT-50G screwdrive machine.
Specification:
1. Workpiece diameter: 3 ~ 12mm.
2. Workpiece length: 80 ~ 250mm.
3. Workpiece type: hex / square / round.
4. Collet Chuck: 15 / 25.
The Spec Of Milling Centers : TOM-2SG step speed head:
1. 42" x 9"table.
2. 3hp motor.
3. Meehanite castings.
4. Mardened & ground cross slide way and table.
5. Chrome hardened, ground quill.
6. High precision 7207 CP4 spoindle bearings.
7. Turcite-B coated on the cross and longitudinal way.
8. Dovetail way x, y, z axis.
The Spec Of Milling Centers : No mater what the kind of sanding application, Chin Chao Sheng can provide the machines that fully meet your requirements. We have the resources to design the machine to suit your rigorous requirements.
The Spec Of Milling Centers : 1. X/Y/Z travel: 1250 x 500 x 470 mm.
2. Spindle speed: 2,000 rpm.
3. Spindle taper: NT # 50.
4. Any angle cutting.
5. Rigid bed-type structure.
6. CNC or pc-base available.
The Spec Of Milling Centers : 1. Rapid traverse on "X", "Y" & "Z" axis.
2. Variable speeds on "X","Y" & "Z" axis.
3. High quality meehanite casting body GC-45/DIN-40.
4. All gears & shafts are hardened.
5. Table swivels 45degrees left & right.
6. All "X", "Y" & &qu....
The Spec Of Milling Centers : 1. Standard accessories: Half-canopied canopy, tool cooling system, auto-grease system, heat-exchanger, RS232 connection line, spindle cooling system, collect holder, collect, lamp, tool set.
2. Extra accessories: full-canopied canopy, high-speed spindle, 4th axis, auto tool compensate system, air dryer.
The Spec Of Milling Centers : 1. Table size(mm): 1067 x 228.6.
2. Longitudinal travel (x)(mm): 710/850 (spec.).
The Spec Of Milling Centers : 1. Round plug of milling plain finidhed machine.
2. Strict quality control, best performance, superior quality, complete range of models, simple and easy maintenance, long service life, high reliability.
The Spec Of Milling Centers : 1. Product name: milling machine.
2. Product No.: CS-U500.
The Spec Of Milling Centers : 1. Integrated automatic lubricating system.
2. Cooling system.
3. Each travel axis is equipped with limit switches to ensure safety.
4. Slide surface lies been treated with hardening, the rigid construction to ensure machine an stable performance.
5. The x, y axis slideways coated with low-friction property materia....
The Spec Of Milling Centers : 1. Product name: horizontal milling machine.
2. Product No.: CS-H450.
The Spec Of Milling Centers : 1. Product name: bed type vertical boring and milling machine.
2. Product No.: CS-VBM-3V.
The Spec Of Milling Centers : 1. These heavy duty bed mills offer high rigidity with the bed transmission slung low between the wide Y-axis ways.
2. Hydraulic head clamping for CS-VBM-5VL.
The Spec Of Milling Centers : 1. Product name: CNC horizontal milling machine.
2. Product No.: CS-VNC450.
The Spec Of Milling Centers : 1. X-axis travel: 900 mm.
2. Y-axis travel: 1000 mm.
3. Z-axis travel: 600 mm.
The Spec Of Milling Centers : 1. X-longlt travel: 762 mm.
2. Y-cross travel: 305 mm.
3. Z-vertical travel: 406 mm.
4. Table surface: 1067 x 230 mm.
The Spec Of Milling Centers : 1. X-longlt travel: 800 / 920 mm.
2. Y-cross travel: 415 mm.
3. Z-vertical travel: 460 mm.
The Spec Of Milling Centers : 1. X-longlt travel: 800 mm.
2. Y-cross travel: 380 mm.
3. Z-vertical travel: 410 mm.
4. Table surface: 1300 x 300 mm.
5. Spindle motor: 5 hp.
The Spec Of Milling Centers : Knee type vertical and horizontal milling machine.
The Spec Of Milling Centers : 1. The capacity of heavy cut is 3 times powerful than tranditional turet type millin ghead.
2. Easy manual operate to move the head up & down.
3. 0.02mm precision micro handle easy to match the requirement of drilling and heavy cutting.
4. 16 speeds variable gear box head ensure precision position and speed.
5.....
The Spec Of Milling Centers : 1. Standard accessories:
(1) Tools and tool box.
(2) Operation manual.
(3) Leveling pad and screw.
(4) x, y, z-axis servo motor drive system.
(5) x, y, z-axis ballscrew.
(6) Metal way cover for y-axis.
(7) Electric box and control panel.
(8) Coolant system.
(9) Halogen work lamp.
(10) Auto lubrica....
The Spec Of Milling Centers : 1. Standard accessories:
(1) Tools and tool box.
(2) Operation manual.
(3) Leveling pad and screw.
(4) x, y, z-axis servo motor drive system.
(5) x, y, z-axis ballscrew.
(6) Metal way cover for y-axis.
(7) Electric box and control panel.
(8) Coolant system.
(9) Halogen work lamp.
(10) Auto lubrica....
The Spec Of Milling Centers : Standard accessories:
1. Mitsubishi m64 controller.
2. Collant system.
3. Auto lubrication.
4. Work lamp.
5. Tools and toolbox.
6. Half enclosed splashguard.
7. Rs-232 interface.
8. Leveling pad and screw.
9. Rigid tapping.
10. Operating manual.
Optional accessories:
1. A.T.C.
2. 4th axis ....
The Spec Of Milling Centers : 1. Siemens 802D control easy-to-operate and program.
2. Fully digital package control to provide high accuracy & high reliability.
3. Massive meehanite cast iron for rigidity.
4. Auto power off.
5. Spindle taper air blow out.
6. Pull out chip pans for easy cleaning.
7. Hand pendant with MPG and controls.
The Spec Of Milling Centers : The BM-series Toolroom mills is designed for machine shop that need prototypes, short runs production and CNC for small batches production working, reduce set up time for complex part and improve part consistence and quality, a complete range available choose for high quality at the affordable price to fit your needs. ....
The Spec Of Milling Centers : The BM-series Toolroom mills is designed for machine shop that need prototypes, short runs production and CNC for small batches production working, reduce set up time for complex part and improve part consistence and quality, a complete range available choose for high quality at the affordable price to fit your needs. ....
The Spec Of Milling Centers : 1. Any angle cutting.
2. Rigid bed-type structure.
3. CNC or PC-base available.
