Select
The Spec Of Vertical & Horizontal Milling Machine : 1. Integrated automatic lubricating system.
2. Cooling system.
3. Each travel axis is equipped with limit switches to ensure safety.
4. Slide surface lies been treated with hardening, the rigid construction to ensure machine an stable performance.
5. The x, y axis slideways coated with low-friction property materia....
Select
The Spec Of Vertical & Horizontal Milling Machine : 1. Fully digital package control to provide high accuracy & high reliability.
2. Massive meehanite cast iron for rigidity.
3. Turcite surfaces + Hardened/ground slide way.
4. Auto power off. 1. X-Y-Z-Travel: 1650 x 750 x 650mm.
2. Table size: 600 mm x 1800 mm.
3. Siemens 802D control easy-to-operate and progr....
Select
The Spec Of Vertical & Horizontal Milling Machine : 1. Three-axis simul taneous feed and rapid traverse: instead of having each axis driven by a separate tiny motor, MILL uses a single powerful 3 H.P. motor to drive all three axes. This means you can be simultaneous feeds or rapid traverse on the table and the knee. The availability of power-feed on the knee (in additio....
Select
The Spec Of Vertical & Horizontal Milling Machine : TOM-2SG step speed head:
1. 42" x 9"table.
2. 3hp motor.
3. Meehanite castings.
4. Mardened & ground cross slide way and table.
5. Chrome hardened, ground quill.
6. High precision 7207 CP4 spoindle bearings.
7. Turcite-B coated on the cross and longitudinal way.
8. Dovetail way x, y, z axis. Spind....
Select
The Spec Of Vertical & Horizontal Milling Machine : 1. Table size(mm): 1067 x 228.6.
2. Longitudinal travel (x)(mm): 710/850 (spec.). 1. Cross travel (y)(mm): 315.
2. Vertical travel (z)(mm): 410. ....
Select
The Spec Of Vertical & Horizontal Milling Machine : 1. Product name: milling machine.
2. Product No.: CS-U500. Table:
1. Working surface: 1500 x 300mm.
2. Travel longitudinal x cross x vertical: 1050 x 320 x 470mm.
3. T-slot (wide x no.x pitch): 16mm x 3 x 70mm.
4. Longitudinal x cross (60Hz): 13~621mm/min.
5. Longitudinal x cross (50Hz): 11~517mm/min.
6. Fe....
Select
The Spec Of Vertical & Horizontal Milling Machine : 1. Integrated automatic lubricating system.
2. Cooling system.
3. Each travel axis is equipped with limit switches to ensure safety.
4. Slide surface lies been treated with hardening, the rigid construction to ensure machine an stable performance.
5. The x, y axis slideways coated with low-friction property materia....
Select
The Spec Of Vertical & Horizontal Milling Machine : 1. Product name: horizontal milling machine.
2. Product No.: CS-H450. Table:
1. Working surface: 1300 x 300mm.
2. Travel longitudinal x cross x vertical: 950 x 320 x 470mm.
3. T-slot (wide x no.x pitch): 16mm x 3 x 70mm.
4. Longitudinal x cross (60Hz): 13~621mm/min.
5. Longitudinal x cross (50Hz): 11~517mm/m....
Select
The Spec Of Vertical & Horizontal Milling Machine : 1. Product name: bed type vertical boring and milling machine.
2. Product No.: CS-VBM-3V. 1. Table travel (longitudinal): 1000mm (39-3/8").
2. Table travel (cross): 380mm (14-15/16").
3. Spindle head travel (vertical): 500mm (19-11/16").
4. Spindle nose to table top: 100~600mm (3-15/16"~23-5....
Select
The Spec Of Vertical & Horizontal Milling Machine : 1. These heavy duty bed mills offer high rigidity with the bed transmission slung low between the wide Y-axis ways.
2. Hydraulic head clamping for CS-VBM-5VL. 1. Table travel (longitudinal): 1500mm (59").
2. Table travel (cross): 600mm (23-5/8").
3. Vertical spindle head travel (vertical): 700mm (27-9/....
Select
The Spec Of Vertical & Horizontal Milling Machine : 1. Product name: CNC horizontal milling machine.
2. Product No.: CS-VNC450. 1. Table travel (x axis): 760 mm.
2. Table travel (y axis): 300 mm.
3. Table travel (z axis): 300 mm.
4. Distance from spindle center to table top: 50~350 mm.
5. Distance from spindle center to overarm: 135 mm.
6. Distance from spindl....
Select
The Spec Of Vertical & Horizontal Milling Machine : 1. X-axis travel: 900 mm.
2. Y-axis travel: 1000 mm.
3. Z-axis travel: 600 mm. 1. Table dimensions: 1300 x 600 mm.
2. Load capacity: 1000 mm. ....
Select
The Spec Of Vertical & Horizontal Milling Machine : 1. X-longlt travel: 762 mm.
2. Y-cross travel: 305 mm.
3. Z-vertical travel: 406 mm.
4. Table surface: 1067 x 230 mm. 1. Spindle motor: 2 hp / 3 hp.
2. Spindle speed: 60 ~ 2280 / 80 ~ 2760 rpm. ....
Select
The Spec Of Vertical & Horizontal Milling Machine : 1. X-longlt travel: 800 / 920 mm.
2. Y-cross travel: 415 mm.
3. Z-vertical travel: 460 mm. 1. Table surface: 1300 x 260 / 1420 x 260 mm.
2. Spindle motor: 3 hp / 5 hp.
3. Spindle speed: 50 ~ 3750 / 60 ~ 4500 rpm. ....
Select
The Spec Of Vertical & Horizontal Milling Machine : Knee type vertical and horizontal milling machine. 1. X-longlt travel: 815 / 1000 mm.
2. Y-cross travel: 380 mm.
3. Z-vertical travel: 435 mm.
4. Table surface: 1300 x 300 mm.
5. Spindle motor: 5 hp.
6. Spindle speed: 50 ~ 3750 /60 ~ 4500 rpm. ....
Select
The Spec Of Vertical & Horizontal Milling Machine : 1. Siemens 802D control easy-to-operate and program.
2. Fully digital package control to provide high accuracy & high reliability.
3. Massive meehanite cast iron for rigidity.
4. Auto power off.
5. Spindle taper air blow out.
6. Pull out chip pans for easy cleaning.
7. Hand pendant with MPG and controls. 1. ....
Select
The Spec Of Vertical & Horizontal Milling Machine : 1. Model: JY-VH480.
(1) Table: 1900 x 420 (mm).
(2) X axis travel: 1300 (mm).
(3) Y axis travel: 850 (mm).
(4) Z axis travel: 780 (mm).
(5) T-slot (Size x numbers x distance): 18 x 5 x 80 (mm).
(6) X, Y axes feedrate: 30-2800 / 30-2000 (mm/min).
(7) Z axis feedratre: 30-2800 / 20-2000 (mm/min).
(8) X, Y axes ra....
Select
The Spec Of Vertical & Horizontal Milling Machine : 1. Model: JY-VH780.
(1) Table: 2600 x 700 (mm).
(2) X axis travel: 2000 (mm).
(3) Y axis travel: 1050 (mm).
(4) Z axis travel: 1000 (mm).
(5) T-slot (Size x numbers x distance): 20 x 5 x 125 (mm).
(6) X, Y axes feedrate: 30-2800 (mm/min).
(7) Z axis feedratre: 30-2800 (mm/min).
(8) X, Y axes rapid travel: 2800 ....
Select
The Spec Of Vertical & Horizontal Milling Machine : 1. Model: JY-2VH.
(1) Table size: 1300 x 300 (mm).
(2) X axis travel: 1000 (mm).
(3) Y axis travel: 360/390 (Manual) (mm).
(4) Z axis travel: 450/490 (Manual) (mm).
(5) T-slot (Size x numbers x distance): 16 x 3 x 63 (mm).
(6) X, Y axes feederate (Variable): 2500 (mm/min).
(7) X, Y axes rapid travel: 2500 (mm/mi....
Select
The Spec Of Vertical & Horizontal Milling Machine : 1. Horizontal and turret head configuration.
2. Table area 1300 x 300 (mm).
3. X-axis travel 1000 (mm).
4. Y-axis travel 360 (mm).
5. Z-axis travel 450 (mm).
6. 16Step speeds, 75-3600 RPM (standard).
7. Variable speed 80-3800 RPM (optional).
8. Spindle taper NST#40. 1. Model: JY-2VH.
(1) Table size: 1300 x ....
Select
The Spec Of Vertical & Horizontal Milling Machine : 1. Powerful vertical and horizontal and turret head configuration.
2. Table area 1300 x 300 (mm).
3. X-axis travel 1000 (mm).
4. Y-axis travel 360 (mm).
5. Z-axis travel 450 (mm).
6. Turret type head with 16 step speeds, 75-3600RPM (stand), Variable speed 80-3800 RPM (optional).
7. Spindle taper NST#40. 1. Mo....
Select
The Spec Of Vertical & Horizontal Milling Machine : Vertical milling center. 1. Compact 6.5’x 5.9’footprint.
2. X-Y-Z Travels: 30" x 14" x 18" (750 x 400 x 450 mm).
3. Table: 14" x 30" (355 x 760 mm).
4. 15 m/min rapid traverse X-Y axis.
5. 7.5 HP vector spindle drives.
6. 40 taper spindle, speeds to 8,000 rpm.
7. Belt drive, direc....
Select
The Spec Of Vertical & Horizontal Milling Machine : Easy-to-operate and program, fully digital package control to provide you with high accuracy & high reliability. 1. X-Y-Z-Travel: 1000 x 500 x 550mm.
2. Table size: 400 x 1370 mm.
3. Massive meehanite cast iron for rigidity.
4. Full-enclosure guard for VM-20, VM-25.
5. Turcite surfaces + hardened/ ground slide ....
Select
The Spec Of Vertical & Horizontal Milling Machine : Easy-to-operate and program, fully digital package control to provide high accuracy & high reliability. Massive Meehanite cast iron for rigidity. 1. X-Y-Z-Travel: 1300 x 600 x 600mm.
2. Table size: 420 x 1600 mm.
3. Full-enclosure guard for VM-20, VM-25.
4. Turcite surfaces + hardened/ground slide way.
5. Cartr....
Select
The Spec Of Vertical & Horizontal Milling Machine : 1. Table : 1500 x 450 mm.
2. X axis travel : 1100 mm.
3. Y axis travel : 520 mm.
4. Z axis travel : 500 mm.
5. T-slot (Size x numbers x distance) : 18 x 3 x 80mm.
6. X, Y axes feedrate : 25-1500 mm/min.
7. Z axis feedratre : 25-1500 mm/min.
8. X, Y axes rapid travel : 1500 mm/min.
9. Z axis rapi....
Select
The Spec Of Vertical & Horizontal Milling Machine : 1. Table mm : 2200x600.
2. X axis travel mm : 1700.
3. Y axis travel mm : 1050.
4. Z axis travel mm : 950.
5. T-slot (Size x numbers x distance): 20 x 5 x 125.
6. X, Y axes feedrate: 30-2800.
7. Z axis feedratre : 30-2800.
8. X, Y axes rapid travel : 2800.
9. Z axis rapid travel : 2800. 1. Cutti....
Select
The Spec Of Vertical & Horizontal Milling Machine : 1. Heavy duty model and high coulumn.
2. 50"X10" table 5HP Motor.
3. Powered table elevation with saftey swith.
4. Electric control box.
5. Halogen work lamp.
6. Auto-lubrication.
7. Meehanite castings.
8. Hardened & ground cross slide way and table.
9. Chrome hardened, ground quill.
10. Hig....
Select
The Spec Of Vertical & Horizontal Milling Machine : 1. 42"X9" table.
2. 3HP motor.
3. Meehanite castings.
4. Mardened & ground cross slide way and table.
5. Chrome hardened, ground quill.
6. High precision 7207 CP4 spoindle bearings.
7. Turcite-B coated on the cross and longitudinal way.
8. Dovetail way X,Y Z axis. 1. Spindle:
(1) Spindle ta....
Select
The Spec Of Vertical & Horizontal Milling Machine : 1. 42" x 9"table.
2. 3HP motor.
3. Meehanite castings.
4. Mardened & ground cross slide way and table.
5. Chrome hardened, ground quill.
6. High precision 7207 CP4 spoindle bearings.
7. Turcite-B coated on the cross and longitudinal way.
8. Dovetail way X,Y Z axis. 1. Spindle:
(1) Spindle t....
Select
The Spec Of Vertical & Horizontal Milling Machine : 1. 50"X10" table.
2. 3HP motor.
3. Meechanite castings.
4. Hardened & ground cross slide way and table.
5. Chrome hardened, ground quill.
6. High precision 7207 CP4 spindle bearings.
7. Turcite-B coated on the cross and longitudinal way.
8. Dovetail way-X,Y,Z axis. 1. Spindle:
(1) Spindle t....