The Spec Of Milling Machine Tools : 1. Integrated automatic lubricating system.
2. Cooling system.
3. Each travel axis is equipped with limit switches to ensure safety.
4. Slide surface lies been treated with hardening, the rigid construction to ensure machine an stable performance.
5. The x, y axis slideways coated with low-friction property materia....
The Spec Of Milling Machine Tools : National taper shank 90° shouder.
The Spec Of Milling Machine Tools : 1. Fully digital package control to provide high accuracy & high reliability.
2. Massive meehanite cast iron for rigidity.
3. Turcite surfaces + Hardened/ground slide way.
4. Auto power off.
The Spec Of Milling Machine Tools : 1. Three-axis simul taneous feed and rapid traverse: instead of having each axis driven by a separate tiny motor, MILL uses a single powerful 3 H.P. motor to drive all three axes. This means you can be simultaneous feeds or rapid traverse on the table and the knee. The availability of power-feed on the knee (in additio....
The Spec Of Milling Machine Tools : AF501:
1. Speed: 90 (pcs/min).
2. Motor: 30HP
3. Machine size: 170x180x160cm.
AT501:
1. Speed: 90 (pcs/min).
2. Motor: 30HP.
3. Machine size: 170x180x160cm.
The Spec Of Milling Machine Tools : Model No: KT-50G screwdrive machine.
Specification:
1. Workpiece diameter: 3 ~ 12mm.
2. Workpiece length: 80 ~ 250mm.
3. Workpiece type: hex / square / round.
4. Collet Chuck: 15 / 25.
The Spec Of Milling Machine Tools : TOM-2SG step speed head:
1. 42" x 9"table.
2. 3hp motor.
3. Meehanite castings.
4. Mardened & ground cross slide way and table.
5. Chrome hardened, ground quill.
6. High precision 7207 CP4 spoindle bearings.
7. Turcite-B coated on the cross and longitudinal way.
8. Dovetail way x, y, z axis.
The Spec Of Milling Machine Tools : 1. NC control machine.
2. Y axis square way, Z axis dove way.
3. Z axis with elevating motor.
4. Spindle speed: variable speed.
5. Mitsubishi / Fanuc control system.
6. Pneumatic tool change.
7. Inverter speed milling head is optional X, Y axis servo motor feed.
The Spec Of Milling Machine Tools : 1. KS-25 and KS-30 belt type complex machine.
2. Designed for various operations, such as vertical milling, end milling, face milling and drilling (tapping function is optional).
3. Chuck arbor.
4. Handwheel.
5. Elevation handle.
6. Knock-out key.
7. Cutting tool and chuck are not included.
8. Standard complex ....
The Spec Of Milling Machine Tools : No mater what the kind of sanding application, Chin Chao Sheng can provide the machines that fully meet your requirements. We have the resources to design the machine to suit your rigorous requirements.
The Spec Of Milling Machine Tools : 1. For masticating and kneading natural rubber, synthetic rubber, E.V.A. or P.V.C. pellets with various kinds chemical material and warming the cold material which shall be supplied to the calender. embossing calender or hot presses, etc.
2. This machine is used for mixing and kneading raw rubber, synthetic rubber, th....
The Spec Of Milling Machine Tools : 1. X/Y/Z travel: 1250 x 500 x 470 mm.
2. Spindle speed: 2,000 rpm.
3. Spindle taper: NT # 50.
4. Any angle cutting.
5. Rigid bed-type structure.
6. CNC or pc-base available.
The Spec Of Milling Machine Tools : 1. Rapid traverse on "X", "Y" & "Z" axis.
2. Variable speeds on "X","Y" & "Z" axis.
3. High quality meehanite casting body GC-45/DIN-40.
4. All gears & shafts are hardened.
5. Table swivels 45degrees left & right.
6. All "X", "Y" & &qu....
The Spec Of Milling Machine Tools : 1. Standard accessories: Half-canopied canopy, tool cooling system, auto-grease system, heat-exchanger, RS232 connection line, spindle cooling system, collect holder, collect, lamp, tool set.
2. Extra accessories: full-canopied canopy, high-speed spindle, 4th axis, auto tool compensate system, air dryer.
The Spec Of Milling Machine Tools : 1.Extremely rigid cast construction:
(1) The main castings including the bed, column, saddle, and table are constructed from hing quality Meehanite castings.
(2) Extra wide base slideways combined with narrow way of straightness guide ensuring high accuracy.
(3) Hardened three axes slideways, heat-treated table surf....
The Spec Of Milling Machine Tools : 1. The drilling of water holes,electric-heating pipe holes.
2. The drilling of valves,controlling units,pushing rods,and pumps.
3. For automative parts industry,aerospace industry,and electric engineering industry.
The Spec Of Milling Machine Tools : 1. Table size(mm): 1067 x 228.6.
2. Longitudinal travel (x)(mm): 710/850 (spec.).
The Spec Of Milling Machine Tools : 1. Round plug of milling plain finidhed machine.
2. Strict quality control, best performance, superior quality, complete range of models, simple and easy maintenance, long service life, high reliability.
The Spec Of Milling Machine Tools : 1. Product name: milling machine.
2. Product No.: CS-U500.
The Spec Of Milling Machine Tools : 1. Integrated automatic lubricating system.
2. Cooling system.
3. Each travel axis is equipped with limit switches to ensure safety.
4. Slide surface lies been treated with hardening, the rigid construction to ensure machine an stable performance.
5. The x, y axis slideways coated with low-friction property materia....
The Spec Of Milling Machine Tools : 1. Product name: horizontal milling machine.
2. Product No.: CS-H450.
The Spec Of Milling Machine Tools : 1. Product name: bed type vertical boring and milling machine.
2. Product No.: CS-VBM-3V.
The Spec Of Milling Machine Tools : 1. These heavy duty bed mills offer high rigidity with the bed transmission slung low between the wide Y-axis ways.
2. Hydraulic head clamping for CS-VBM-5VL.
The Spec Of Milling Machine Tools : 1. Product name: CNC horizontal milling machine.
2. Product No.: CS-VNC450.
The Spec Of Milling Machine Tools : 1. X-axis travel: 900 mm.
2. Y-axis travel: 1000 mm.
3. Z-axis travel: 600 mm.
The Spec Of Milling Machine Tools : 1. X-longlt travel: 762 mm.
2. Y-cross travel: 305 mm.
3. Z-vertical travel: 406 mm.
4. Table surface: 1067 x 230 mm.
The Spec Of Milling Machine Tools : 1. X-longlt travel: 800 / 920 mm.
2. Y-cross travel: 415 mm.
3. Z-vertical travel: 460 mm.
The Spec Of Milling Machine Tools : 1. X-longlt travel: 800 mm.
2. Y-cross travel: 380 mm.
3. Z-vertical travel: 410 mm.
4. Table surface: 1300 x 300 mm.
5. Spindle motor: 5 hp.
The Spec Of Milling Machine Tools : Knee type vertical and horizontal milling machine.
The Spec Of Milling Machine Tools : 1. The capacity of heavy cut is 3 times powerful than tranditional turet type millin ghead.
2. Easy manual operate to move the head up & down.
3. 0.02mm precision micro handle easy to match the requirement of drilling and heavy cutting.
4. 16 speeds variable gear box head ensure precision position and speed.
5.....
