The Spec Of Crystal Clock Oscillators : Features:
1. Typical 3.2 x 2.5 x 0.9 mm SMD.
2. For automatic assembly.
3. Compactness and lightweight.
4. Low power consumption.
5. VCTCXO available.
6. Low thickness.
7. External DC-CUT capacitor required. NPO 150pF recommended. 1. Frequency range: 16MHz~40MHz
2. OEM & ODM orders are welcome.
3. Voltage ....
The Spec Of Crystal Clock Oscillators : Quartz is a device that carries the piezoelectric characteristics. The piezoelectric characteristics of a quartz crystal is briefly explained below:
If a piezoelectric quartz crystal has electrodes plated on opposite faces and if a potential is applied between these electrodes, forces will be exerted on the bound char....
The Spec Of Crystal Clock Oscillators : Quartz is a device that carries the piezoelectric characteristics. The piezoelectric characteristics of a quartz crystal is briefly explained below:
If a piezoelectric quartz crystal has electrodes plated on opposite faces and if a potential is applied between these electrodes, forces will be exerted on the bound char....
The Spec Of Crystal Clock Oscillators : Quartz is a device that carries the piezoelectric characteristics. The piezoelectric characteristics of a quartz crystal is briefly explained below:
If a piezoelectric quartz crystal has electrodes plated on opposite faces and if a potential is applied between these electrodes, forces will be exerted on the bound char....
The Spec Of Crystal Clock Oscillators : 1. Ultra thin.
2. Tight tolerance. Features:
1. 5.0 x 3.2 x 0.9 mm ceramic SMD package.
2. 12mm width tape & reel package. For automatic assembly.
3. Tight tolerance 10 ppm available.
4. Packing: tape & reel, 1000/2000/3000/5000 pcs per reel.
Frequency range:
11MHz~40MHz. ....
The Spec Of Crystal Clock Oscillators : 1. HCMOS circuit TTL/CMOS compatible.
2. Tight symmetry.
3. High reliability. Features:
1. Typical 20.4 x 12.8 x 5.0 mm standard package.
2. Compatible with 14-pin dual in line.
3. CMOS circuit TTL/CMOS compatible.
4. Hermetically sealed metal case and high reliability.
5. Tight symmetry (45 to 55%) availabl....
The Spec Of Crystal Clock Oscillators : 1. TTL / CMOS.
2. Tight Symmetry.
3. High Reliability. Features:
1. Typical 12.8 x 12.8 x 5.0 mm standard package.
2. HCMOS circuit TTL/CMOS compatible.
3. Hermetically sealed metal case and high reliability.
4. Tight symmetry(45 to 55%) available.
5. Tri-state output option available.
6. Packing: 50pcs per....
The Spec Of Crystal Clock Oscillators : 1. 6 pads.
2. Tight symmetry.
3. Low phase jitter.
4. Complementary O/P.
5. Up to 320MHz. Features:
1. Typical 7.5 x 5.0 x 1.6 mm 6 pads SMD package.
2. Tight symmetry(45 to 55%)available.
3. High frequency up to 700MHz.
4. Low frequency down to 1.5MHz.
5. Low phase jitter.
6. Complementary output.
7. Gr....
The Spec Of Crystal Clock Oscillators : 1. Ultra low jitter
2. Tight symmetry
3. Low standby curr. 1. Typical 5.0 x 3.2 x 1.2 mm SMD package
2. Tight symmetry(45 to 55%) available
3. Packing: tape & reel, 1000/2000/3000/5000 pcs per reel.
Frequency range:
0.32768 ~ 125MHz ....
The Spec Of Crystal Clock Oscillators : 1. Fast delivery
2. Low period jitter
3. Widely voltage
4. Low standby current. 1. Typical 2.5 x 2.0 x 0.95 mm ceramic SMD package.
2. Tight symmetry (45 to 55 %) available.
3. Operation voltage: 1.8V, 2.5V, 3.3V
4. Packing: tape & reel, 1000/2000/3000/5000 pcs per reel.
Frequency range:
1 ~ 200MHz. ....
The Spec Of Crystal Clock Oscillators : 1. For mobile phone.
2. For automatic assembly.
3. Low consumption.
4. VCTCXO available. Features:
1. Typical 5.0 x 3.2 x 1.15 mm SMD.
2. For automatic assembly.
3. Compactness and light weight.
4. Low power consumption.
5. VCTCXO available.
6. External DC-CUT capacitor required, NPO 150pF recommended.
....
The Spec Of Crystal Clock Oscillators : 1. 6 Pads.
2. Tight Symmetry. Feature:
1. Typical 7.0 x 5.0 x 1.6 mm 6 Pads ceramic SMD package.
2. Tight symmetry (45 to 55%) available.
3. Packing: tape & reel, 1000/3000 pcs per reel.
Frequency range:
1.5MHz~200MHz. ....
The Spec Of Crystal Clock Oscillators : 1. FR-4 PCB based.
2. Pulling range ±400ppm. Feature:
1. Typical 14.3 x 8.7 x 6.0 mm SMD.
2. Metal cover, FR-4 PCB Based.
3. Output: TTL/CMOS or sine wave.
4. Pulling range +/-400ppm available. (Only for VDD= 5.0V ). ....
The Spec Of Crystal Clock Oscillators : 1. For mobile phone.
2. For automatic assembly.
3. Low consumption.
4. VCTCXO available. Features:
1. Typical 3.2 x 2.05 x 0.9 mm.
2. SMD For GPS compactness and light weight.
3. Low power consumption.
Frequency range:
16MHz~40MHz. ....
The Spec Of Crystal Clock Oscillators : Feature:
1. XJ typical 13 .0 x 4.85 x 4.2 mm metal can SMD package.
2. 24 mm width tape & reel package for automatic assembly.
3. Packing: tape & reel, standard 1000 pcs per reel. Frequency range: 3.5~80 MHz. ....
The Spec Of Crystal Clock Oscillators : Feature:
1. Standard footpoint.
2. Low profile. 1. XI typical 11 .1 x 4.68 x 3.51 mm standard footprint.
2. Low profile for close PCB stacking.
3. Packing: plastic bag 200/500 pcs or ammopack 1000 pcs (800 pcs).
4. Frequency range: 3.5~80 MHz. ....
The Spec Of Crystal Clock Oscillators : Features:
1. Typical 5.0 x 3.2 x 1.15 mm 4 pads ceramic SMD package.
2. +/-10ppm over -20oC ~ +70oC, +/-20ppm over -40oC ~ +85oC including 10 years aging.
3. Ideal for wireless LAN/hot spot applications at 40MHz.
4. Tight symmetry(45 to 55%) available. Frequency range: 1.5MHz~55MHz. ....
The Spec Of Crystal Clock Oscillators : Features:
1. Typical 7.0 x 5.0 x 1.6 mm 6 pads ceramic SMD package.
2. Tight symmetry (45 to 55%) available. 1. Frequency range: 1.5MHz~200MHz.
2. Packing: tape & reel, 1000 / 3000 pcs per reel.
3. OEM & ODM orders are welcome. ....
The Spec Of Crystal Clock Oscillators : Features:
1. Typical 36.0 x 27.0 x 15.0 mm.
2. AT-cut or SV-cut crystal.
3. HCMOS / sine wave outpue. 1. Frequency range: 5MHz~80MHz.
2. OEM & ODM orders are welcome.
3. Oven controlled crystal cscillator (ocxo). ....
The Spec Of Crystal Clock Oscillators : Features:
1. Typical 20.4 x 12.8 x 7.8 mm, standard package.
2. Compatible with 14-pin dual in line.
3. Double sealed metal case and high reliability.
4. Case ground for minimizing RF radiation.
5. Could supply gull-wings for SMT.
6. VCTCXO available. 1. Frequency range: 1.25MHz~51.84MHz.
2. OEM & ODM orders....
The Spec Of Crystal Clock Oscillators : 1. Typical 3.2 x 2.5 x 1.05 mm ceramic SMD package.
2. Tight symmetry (45 to 55 %) available.
3. Low period jitter.
4. Operation voltage: 1.8V, 2.5V, 3.3V.
5. Packing: tape & reel, 1000 / 2000 / 3000 / 5000 pcs per reel. 1. Frequency range: 0.625MHz~50MHz.
2. OEM & ODM orders are welcome! ....
The Spec Of Crystal Clock Oscillators : Features:
1. Typical 5.0 x 3.2 x 1.15 mm SMD.
2. VC-TCXO for personal cellular phone.
3. For automatic assembly.
4. Compactness and light weight.
5. Low power consumption.
6. VCTCXO available. 1. Frequency range: 10.0MHz~26MHz.
2. OEM & ODM orders are welcome. ....
The Spec Of Crystal Clock Oscillators : Features:
1. Typical 12.8 x 12.8 x 5.0 mm standard package.
2. Compatible with 8-pin dual in line.
3. HCMOS circuit TTL/CMOS compatible.
4. Hermetically sealed metal case and high reliability.
5. Case ground for minimizing RF radiation.
6. Tight symmetry (45 to 55%) available.
7. Good linearity (
The Spec Of Crystal Clock Oscillators : 1. Typical 4.0 x 2.5 x 0.8 mm ultra thin ceramic package.
2. 12 mm width tape & reel package for automatic assembly.
3. Tight tolerance 10 ppm available.
4. Packing: tape & reel, 1000/2000/3000/5000 pcs per reel.
5. For bluetooth™ and GSM mobile phone. Frequency: 12 ~ 36.864MHz. ....
The Spec Of Crystal Clock Oscillators : 1. Typical 2.5 x 2.0 x 0.95 mm ceramic SMD package.
2. Tight symmetry (45 to 55%) available.
3. Low phase jitter.
4. Operation voltage: 1.8V, 2.5V, 3.3V.
5. Packing: tape & reel, 1000/2000/3000/5000pcs per reel.
6. Typical application: WLAN/WiMax, mobile phone, DSC, STB, HDTV. Frequency range: 1 ~ 40 MHz. ....
The Spec Of Crystal Clock Oscillators : 1. Typical 2.5 x 2.0 x 0.95 mm ceramic SMD package.
2. Tight symmetry (45 to 55%) available.
3. Operation voltage: 1.8V, 2.5V, 3.3V.
4. Packing: tape & reel, 1000/2000/3000/5000pcs per reel.
5. Typical application: computer peripherals, set-box, HDTV, DSC, PDA. Frequency range: 1 ~ 200MHz. ....
The Spec Of Crystal Clock Oscillators : 1. Fast delivery.
2. Low period jitter.
3. Widely voltage.
4. Low standby current.
5. Typical 3.2 x 2.0 x 1.05 mm ceramic SMD package.
6. Tight symmetry (45 to 55%) available.
7. Operation voltage: 1.8V, 2.5V, 3.3V.
8. Packing: tape & reel, 1000/2000/3000/5000pcs per reel.
9. Typical application: computer perip....
The Spec Of Crystal Clock Oscillators : Feature:
1. Ultra low jitter.
2. Tight symmetry.
3. Low standby curr.
Typical application:
1. Computer peripherals.
2. Set-box, HDTV.
3. DSC, PDA, set-box. 1. Typical 5.0 x 3.2 x 1.05 mm ceramic SMD package.
2. Tight symmetry (45 to 55%) available.
3. Operation voltage: 1.8V, 2.5V, 3.3V
4. Packing: tape....
The Spec Of Crystal Clock Oscillators : Feature:
1. 6 pads.
2. Tight symmetry.
3. Up to 700MHz.
4. Low phase jitter.
5. Complementary O/P. 1. Typical 7.5 x 5.0 x 1.9 mm, 6 pads ceramic SMD package.
2. Tight symmetry (45 to 55%) available.
3. Low phase jitter. (max: 0.3 pSec).
4. Complementary output.
5. Output frequency up to 320MHz.
6. Packing....
The Spec Of Crystal Clock Oscillators : Feature:
1. TTL/CMOS.
2. Tight symmetry.
3. High reliability. 1. Typical 12.8 x 12.8 x 5.0 mm standard package.
2. Compatible with 8-Pin dual in line.
3. CMOS circuit TTL/CMOS compatible.
4. Hermetically sealed metal case and high reliability.
5. Tight symmetry (45 to 55%) available.
6. Packing: 50pcs per t....
