The Spec Of CATV Amplifier Manufacturers : KM-8D36AGS is 870 MHz trunk amplifier is a cable tv equipment for CATV system. 1. Frequency range: 5 - 870 MHz.
2. Response: +/- 0.5 dB. ....
The Spec Of CATV Amplifier Manufacturers : 1. Suit to both outdoor and indoor.
2. BR, input and output all available for power-in.
3. Power/RF double isolation, multi-protection.
4. Input/Output attenuation adjustable. 1. Forward technology: MMIC.
2. Reverse technology: Transistor.
3. Frequece: 5 ~ 42MHz, 54 ~ 1000MHz.
4. Min. full gain (main): 13dB.
....
The Spec Of CATV Amplifier Manufacturers : 1. Professional quality QAM Agile Modulator an UP Converter
2. Accepts DVB-ASI input or EN50083-9, complies with DVB ASI standard
3. RF output channels 2~135 (54~860MHz)
4. Minimum 40dBmv output level, low group delay provide crisp, clear picture
5. ANNEX B and ANNEX A FEC encoder Support
6. Supports Fixed and ....
The Spec Of CATV Amplifier Manufacturers : Southwold’s MMDA series drop amplifiers are specifically designed for the advanced broadband industries. As the CATV network requirement on the subscriber premise has increased to provide data, video on demand and voice over IP results in the need to install highly reliable subscriber amplifier with exceptional signa....
The Spec Of CATV Amplifier Manufacturers : The SDA MiniFlex 1002 MHz super distribution amplifiers are the next generation of ACI's distribution RF amplifiers that are offered in a variety of different configurations to meet the divergent needs of today's broadband networks. They are designed to offer superior 2-way performance for new system builds, and also a....
The Spec Of CATV Amplifier Manufacturers : 1. A popular priced agile NTSC modulator.
2. Frequency agility with 82 channel coverage from 54 MHz to 550 MHz.
3. CATV (STD, HRC or IRC) or off-air channel plans selectable from front panel.
4. Front panel control of channel selection, video level, audio level, output level, and A/V ratio.
5. High output power....
The Spec Of CATV Amplifier Manufacturers : 1. A popular priced agile NTSC modulator.
2. Frequency agility with 135 channel coverage from 54 MHz to 860 MHz.
3. CATV (STD, HRC or IRC) or off-air channel plans selectable from front panel.
4. Front panel control of channel selection, video level, audio level, output level, and A/V ratio.
5. High output powe....
The Spec Of CATV Amplifier Manufacturers : 1. 30dB gain for optimal carrier to noise ratio and superior picture quality
2. Employs state-of-the art hybrid push-pull technology for distortion-free audio-video quality
3. Adjustable slope and gain controls for easy system balancing
4. Easy-access controls and low-loss (-20dB) test point enable simplified setu....
The Spec Of CATV Amplifier Manufacturers : 1. 30dB gain for optimal carrier to noise ratio and superior picture quality
2. Employs state-of-the art hybrid push-pull technology for distortion-free audio-video quality
3. Adjustable slope and gain controls for easy system balancing
4. Easy-access controls and low-loss (-20dB) test point enable simplified set....
The Spec Of CATV Amplifier Manufacturers : 1. 42 dB forward gain, adjustable, and a passive return path for signals in the 5 to 36 MHz frequency range.
2. The amplifier incorporates a push-pull, hybrid amplifier for a high quality, low distortion signal.
3. Rugged aluminum housing for durability and heat dissipation.
4. Input and Output test connections f....
The Spec Of CATV Amplifier Manufacturers : 1. The CCT SPC801, SPC1201, and SPC1601 passive combiners are utilized at the cable television headend to combine the outputs of several modulators or channel processors on to a single coaxial cable. The models offer 8 inputs, 12 inputs, and 16 inputs, respectively. These broadband products accept input levels up to +6....
The Spec Of CATV Amplifier Manufacturers : 1. The CCT SPC801, SPC1201, and SPC1601 passive combiners are utilized at the cable television headend to combine the outputs of several modulators or channel processors on to a single coaxial cable. The models offer 8 inputs, 12 inputs, and 16 inputs, respectively. These broadband products accept input levels up to +6....
The Spec Of CATV Amplifier Manufacturers : 1. The CCT SPC801, SPC1201, and SPC1601 passive combiners are utilized at the cable television headend to combine the outputs of several modulators or channel processors on to a single coaxial cable.
2. The models offer 8 inputs, 12 inputs, and 16 inputs, respectively.
3. These broadband products accept input level....
The Spec Of CATV Amplifier Manufacturers : 1. 16 RF signal Inputs.
2. Front panel monitor output.
3. Standard 19" rack mount panel, 1.75" high.
4. Built in low noise figure, low distortion GaAs output amplifier for linear signal output.
The Spec Of CATV Amplifier Manufacturers : 1. Analog composite video input in NTSC/PAL format.
2. 4:2:0 MP@ML video compressions from 2.5 to 15 Mbps.
3. Analog stereo audio input.
4. MPEG-1 layer2 audio compression.
5. ISO/IEC 13818-1 PAT and PMT tables with Single Program Transport Stream (SPTS) output transport stream.
6. Local control via front pane ....
The Spec Of CATV Amplifier Manufacturers : 1. Audio/Video inputs MPEG-2 Encoder to one DVB-T signal output
2. Analog composite video input in NTSC/PAL format
3. Analog stereo audio input
4. MPEG-2 MP@ML video compression
5. MPEG-1 Layer2 audio compression
6. Programmable Channel Name and Network Name
7. Adjustable Logic Channel Number (LCN)
8. Easy Set-u....
The Spec Of CATV Amplifier Manufacturers : 1. 6 Audio/Video inputs MPEG-2 Encoder/Multiplexer to one QAM output
2. Analog composite video input in NTSC/PAL format
3. Analog stereo audio input
4. MPEG-2 MP@ML video compression
5. MPEG-1 Layer2 audio compression
6. RF output channel 2 ~ 135 (54 ~ 864 MHz)
7. Easy Set-up & Configuration via Front Panel L....
The Spec Of CATV Amplifier Manufacturers : 1. 82 Channel Frequency Range 54~ 550MHz (CATV 2~13, A1~A5, A~PPP)
2. SAW (surface acoustic wave) filtered for superior adjacent channel performance enables drop-in channel expansion
3. BTSC stereo compatible pre-emphasis disable switch provides pass-through for stereo signals
4. Front panel access controls enabl....
The Spec Of CATV Amplifier Manufacturers : 1. 135 Channel Frequency Range 54~860MHz (CATV 2~13, A1~A5, A~ZZZ, 89~135, UHF 14~69)
2. Agile microprocessor control enables quick digital push-button channel selection for ease of installation, configuration and improved system uptime
3. SAW (surface acoustic wave) filtered for superior adjacent channel performan....
The Spec Of CATV Amplifier Manufacturers : 1. Product: Indoor Distribution Amplifier 860MHz
2. USED FOR INDOOR SMATV / MATV / CATV.
3. OPTIONAL ACCESSORIES- PLUG-IN RETURN AMPLIFIER ( MODEL:REV-18A GAIN: 18dB GAIN & SLOPE Adjustable)
The Spec Of CATV Amplifier Manufacturers : 1. 2-Way, tuneable amplifier module design.
2. Adjustable gain and slop.
3. With replaceable American Spec of lightning protectors.
4. AC power supply insert with special port.
5. Offer a bridger for additional port.
6. Switching power design.
7. Plug-in return amplifier module. 1. Technology: hybrid IC.
2. ....
The Spec Of CATV Amplifier Manufacturers : 1. Easy maintenance for module design.
2. Switching power design.
3. Special plug for power input port.
4. No power cutoff when the amplifier module is dissembled. 1. Technology: power double dual hybrid IC.
2. Reverse broad band: 5~42.
3. Forward broad band: 54 ~ 750. ....
The Spec Of CATV Amplifier Manufacturers : ACI LE-x32 series line extender amplifier is a versatile platform for using in the hybrid coaxial (HFC) distribution architectures. 1. 550 MHz (LE 532) or 750 MHz (LE 732) or 870 MHz (LE 832).
2. Adjustable attenuator pad & equalizer: easy operation.
3. 20dB directional test point at the input and output port of ....
The Spec Of CATV Amplifier Manufacturers : The ACI NLEII is a compact size, easy installation and cost effective line extender amplifier. This amplifier provides high quality RF distribution for HFC (hybrid fiber coaxial) network. The AC power source provides operating power to the amplifier's active components via coaxial cable. All amplifiers support two-way ....
The Spec Of CATV Amplifier Manufacturers : 1. 2 way CATV outdoor amplifier.
2. 862MHz. 1. Suit for NTSC/PAL system.
2. 1PP 1PD hybrid IC. ....
The Spec Of CATV Amplifier Manufacturers : 1. 2 way indoor amplifier.
2. 550/750/860MHz. 1. Suit for NTSC/PAL system.
2. Diemnsion(LxWxH): 232 x 136 x 56. ....
The Spec Of CATV Amplifier Manufacturers : The ACI Communications Drop Amplifier line consists of house-type active devices that deliver superior performance up to 1 GHz in today's expanding RF telecommunications networks. 1. Two-way transmission through passive reverse.
2. 1 GHz bandwidth.
3. VoIP by pass fuction upon power out age (4-port version only).....
The Spec Of CATV Amplifier Manufacturers : 1. 2 way catv amplifier.
2. 550/750/860MHz for options.
3. Suit for NTSC/PAL system. 1. Easy maintenance module design.
2. Switching power design.
3. No power cutoff when the amplifier module is dissembled. ....
The Spec Of CATV Amplifier Manufacturers : The drop amplifier provides additional gain at the customer premise when needed as a result of long drops, multiple TV outlets, or multiple service requirements. The four port version is a bybass drop amplifier which is designed to support telephony application with high reliability and uninterrupted sevice even in the....
The Spec Of CATV Amplifier Manufacturers : The ACI communications' multiFlex amplifier is specifically designed for use in vertical mount applications. It is ideal for apartment complexes or business high-rise situations. The MultiFlex is a state-of-the-art, bi-directional amplifier offered as an indoor (UL, CUL & CE listed) mains powered (90-240 VAC) or an out....
