The Spec Of CATV Manufacturers : AM-862 is used for CATV head-end system. It is available for
all video systems. And bandwidth up to 862 MHz. 1. Frequency range: 46 - 862 MHz.
2. Output level: 115 - 120 dB.
3. Spurious: 60 dB Min. ....
The Spec Of CATV Manufacturers : 1. Easy maintenance for module design.
2. Switching power design.
3. Special plug for power input port.
4. No power cutoff when the amplifier module is dissembled. 1. Technology: power double dual hybrid IC.
2. Reverse broad band: 5~42.
3. Forward broad band: 54 ~ 750. ....
The Spec Of CATV Manufacturers : 1. Professional quality QAM Agile Modulator an UP Converter
2. Accepts DVB-ASI input or EN50083-9, complies with DVB ASI standard
3. RF output channels 2~135 (54~860MHz)
4. Minimum 40dBmv output level, low group delay provide crisp, clear picture
5. ANNEX B and ANNEX A FEC encoder Support
6. Supports Fixed and ....
The Spec Of CATV Manufacturers : 1. P4 1.7 GHz CPU or above above.
2. 256MB or above.
3. Microsoft windows 2000 SP4/ windows XP SP1 or above.
4. Graphic card (support microsoft directX 9.0 or above.
5. AC’97 compatible sound card / chipset for audio playback.
6. Microsoft directX 9.0c or above.
7. Microsoft media play or above.
8. Work UHF/VH....
The Spec Of CATV Manufacturers : 1. A popular priced agile NTSC modulator.
2. Frequency agility with 82 channel coverage from 54 MHz to 550 MHz.
3. CATV (STD, HRC or IRC) or off-air channel plans selectable from front panel.
4. Front panel control of channel selection, video level, audio level, output level, and A/V ratio.
5. High output power....
The Spec Of CATV Manufacturers : 1. A popular priced agile NTSC modulator.
2. Frequency agility with 135 channel coverage from 54 MHz to 860 MHz.
3. CATV (STD, HRC or IRC) or off-air channel plans selectable from front panel.
4. Front panel control of channel selection, video level, audio level, output level, and A/V ratio.
5. High output powe....
The Spec Of CATV Manufacturers : 1. 30dB gain for optimal carrier to noise ratio and superior picture quality
2. Employs state-of-the art hybrid push-pull technology for distortion-free audio-video quality
3. Adjustable slope and gain controls for easy system balancing
4. Easy-access controls and low-loss (-20dB) test point enable simplified setu....
The Spec Of CATV Manufacturers : 1. 30dB gain for optimal carrier to noise ratio and superior picture quality
2. Employs state-of-the art hybrid push-pull technology for distortion-free audio-video quality
3. Adjustable slope and gain controls for easy system balancing
4. Easy-access controls and low-loss (-20dB) test point enable simplified set....
The Spec Of CATV Manufacturers : 1. 42 dB forward gain, adjustable, and a passive return path for signals in the 5 to 36 MHz frequency range.
2. The amplifier incorporates a push-pull, hybrid amplifier for a high quality, low distortion signal.
3. Rugged aluminum housing for durability and heat dissipation.
4. Input and Output test connections f....
The Spec Of CATV Manufacturers : 1. The CCT SPC801, SPC1201, and SPC1601 passive combiners are utilized at the cable television headend to combine the outputs of several modulators or channel processors on to a single coaxial cable. The models offer 8 inputs, 12 inputs, and 16 inputs, respectively. These broadband products accept input levels up to +6....
The Spec Of CATV Manufacturers : 1. The CCT SPC801, SPC1201, and SPC1601 passive combiners are utilized at the cable television headend to combine the outputs of several modulators or channel processors on to a single coaxial cable. The models offer 8 inputs, 12 inputs, and 16 inputs, respectively. These broadband products accept input levels up to +6....
The Spec Of CATV Manufacturers : 1. The CCT SPC801, SPC1201, and SPC1601 passive combiners are utilized at the cable television headend to combine the outputs of several modulators or channel processors on to a single coaxial cable.
2. The models offer 8 inputs, 12 inputs, and 16 inputs, respectively.
3. These broadband products accept input level....
The Spec Of CATV Manufacturers : 1. 16 RF signal Inputs.
2. Front panel monitor output.
3. Standard 19" rack mount panel, 1.75" high.
4. Built in low noise figure, low distortion GaAs output amplifier for linear signal output.
The Spec Of CATV Manufacturers : 1. Analog composite video input in NTSC/PAL format.
2. 4:2:0 MP@ML video compressions from 2.5 to 15 Mbps.
3. Analog stereo audio input.
4. MPEG-1 layer2 audio compression.
5. ISO/IEC 13818-1 PAT and PMT tables with Single Program Transport Stream (SPTS) output transport stream.
6. Local control via front pane ....
The Spec Of CATV Manufacturers : 1. Audio/Video inputs MPEG-2 Encoder to one DVB-T signal output
2. Analog composite video input in NTSC/PAL format
3. Analog stereo audio input
4. MPEG-2 MP@ML video compression
5. MPEG-1 Layer2 audio compression
6. Programmable Channel Name and Network Name
7. Adjustable Logic Channel Number (LCN)
8. Easy Set-u....
The Spec Of CATV Manufacturers : 1. 6 Audio/Video inputs MPEG-2 Encoder/Multiplexer to one QAM output
2. Analog composite video input in NTSC/PAL format
3. Analog stereo audio input
4. MPEG-2 MP@ML video compression
5. MPEG-1 Layer2 audio compression
6. RF output channel 2 ~ 135 (54 ~ 864 MHz)
7. Easy Set-up & Configuration via Front Panel L....
The Spec Of CATV Manufacturers : 1. 82 Channel Frequency Range 54~ 550MHz (CATV 2~13, A1~A5, A~PPP)
2. SAW (surface acoustic wave) filtered for superior adjacent channel performance enables drop-in channel expansion
3. BTSC stereo compatible pre-emphasis disable switch provides pass-through for stereo signals
4. Front panel access controls enabl....
The Spec Of CATV Manufacturers : 1. 135 Channel Frequency Range 54~860MHz (CATV 2~13, A1~A5, A~ZZZ, 89~135, UHF 14~69)
2. Agile microprocessor control enables quick digital push-button channel selection for ease of installation, configuration and improved system uptime
3. SAW (surface acoustic wave) filtered for superior adjacent channel performan....
The Spec Of CATV Manufacturers : 1. 2-Way, tuneable amplifier module design.
2. Adjustable gain and slop.
3. With replaceable American Spec of lightning protectors.
4. AC power supply insert with special port.
5. Offer a bridger for additional port.
6. Switching power design.
7. Plug-in return amplifier module. 1. Technology: hybrid IC.
2. ....
The Spec Of CATV Manufacturers : PS-915A is a professional power supply for CATV system. 1. Input: 110 / 220 VAC / 50 / 60 Hz.
2. Output: 60 VAC.
3. Current: 15 A.
4. Type: square wave. ....
The Spec Of CATV Manufacturers : KM-8D36AGS is 870 MHz trunk amplifier is a cable tv equipment for CATV system. 1. Frequency range: 5 - 870 MHz.
2. Response: +/- 0.5 dB. ....
The Spec Of CATV Manufacturers : Optical receiver for CATV system. FR-862C is an 870 MHz optical receiver with 3 RF out. ....
The Spec Of CATV Manufacturers : Connectors for CATV system. 0.860" / 0.750" / 0.540" / 0.500" / 0.412" / RG-11 / RG-6 series CATV connectors. ....
The Spec Of CATV Manufacturers : Trunk passives for CATV system. LDC-8 / LDC-12 / LDC-16 are trunk passives up to 1 GHz for CATV system. ....
The Spec Of CATV Manufacturers : Outdoor taps for CATV system. MT-102 / MT-104 / MT-108 are outdoor taps up to 1 GHz. ....
The Spec Of CATV Manufacturers : 1. UPS power supply for CATV system.
2. Stand-by time up to 3 hours. UPS-315 is UPS power supply for CATV system with output 60 VAC / 15 A. ....
The Spec Of CATV Manufacturers : 1310 nm and 1550 nm optical transmitters for CATV system. 1. TM-1310 & TM-1550 are 1310 NM and 1550 NM optical transmitters for CATV system.
2. Frequency range up to 870 MHz. ....
The Spec Of CATV Manufacturers : 1. DVB-1000 encoder is used for CATV digital encryption system.
2. DVB-1000 Encoder with CAS Scrambling Technology. 1. Video compression and encoding: MPEG-2 4:2:0MP@ML encoding (ISO/IEC13818-2) and CCIR601 standards.
2. Frame processing: I, P, B.
3. GOP structure Variable or fixed, including: I, IP, IPB, IPBB.
....
The Spec Of CATV Manufacturers : DVB-3000 QAM modulator is used for CATV digital system to convert signal to digital output. 1. Full compliance with DVB-C ETSI / EN300 429.
2. Input TS (MPEG2 SPTS or MPTS) interface.
3. ASI: 188 or 204 byte packet length auto-detection; DS3 (Optional).
4. Input TS available bit rate: 160Mbps.
5. Energy diffusi....
The Spec Of CATV Manufacturers : DVB-4000 is a digital decoder which used for CATV CAS encryption system. DVB-4000 digital decoder with QAM 64 / 128 / 256 / 512. ....
