The Spec Of CATV Modules : 1. Professional quality QAM Agile Modulator an UP Converter
2. Accepts DVB-ASI input or EN50083-9, complies with DVB ASI standard
3. RF output channels 2~135 (54~860MHz)
4. Minimum 40dBmv output level, low group delay provide crisp, clear picture
5. ANNEX B and ANNEX A FEC encoder Support
6. Supports Fixed and ....
The Spec Of CATV Modules : 1. A popular priced agile NTSC modulator.
2. Frequency agility with 82 channel coverage from 54 MHz to 550 MHz.
3. CATV (STD, HRC or IRC) or off-air channel plans selectable from front panel.
4. Front panel control of channel selection, video level, audio level, output level, and A/V ratio.
5. High output power....
The Spec Of CATV Modules : 1. A popular priced agile NTSC modulator.
2. Frequency agility with 135 channel coverage from 54 MHz to 860 MHz.
3. CATV (STD, HRC or IRC) or off-air channel plans selectable from front panel.
4. Front panel control of channel selection, video level, audio level, output level, and A/V ratio.
5. High output powe....
The Spec Of CATV Modules : 1. 30dB gain for optimal carrier to noise ratio and superior picture quality
2. Employs state-of-the art hybrid push-pull technology for distortion-free audio-video quality
3. Adjustable slope and gain controls for easy system balancing
4. Easy-access controls and low-loss (-20dB) test point enable simplified setu....
The Spec Of CATV Modules : 1. 30dB gain for optimal carrier to noise ratio and superior picture quality
2. Employs state-of-the art hybrid push-pull technology for distortion-free audio-video quality
3. Adjustable slope and gain controls for easy system balancing
4. Easy-access controls and low-loss (-20dB) test point enable simplified set....
The Spec Of CATV Modules : 1. 42 dB forward gain, adjustable, and a passive return path for signals in the 5 to 36 MHz frequency range.
2. The amplifier incorporates a push-pull, hybrid amplifier for a high quality, low distortion signal.
3. Rugged aluminum housing for durability and heat dissipation.
4. Input and Output test connections f....
The Spec Of CATV Modules : 1. The CCT SPC801, SPC1201, and SPC1601 passive combiners are utilized at the cable television headend to combine the outputs of several modulators or channel processors on to a single coaxial cable. The models offer 8 inputs, 12 inputs, and 16 inputs, respectively. These broadband products accept input levels up to +6....
The Spec Of CATV Modules : 1. The CCT SPC801, SPC1201, and SPC1601 passive combiners are utilized at the cable television headend to combine the outputs of several modulators or channel processors on to a single coaxial cable. The models offer 8 inputs, 12 inputs, and 16 inputs, respectively. These broadband products accept input levels up to +6....
The Spec Of CATV Modules : 1. The CCT SPC801, SPC1201, and SPC1601 passive combiners are utilized at the cable television headend to combine the outputs of several modulators or channel processors on to a single coaxial cable.
2. The models offer 8 inputs, 12 inputs, and 16 inputs, respectively.
3. These broadband products accept input level....
The Spec Of CATV Modules : 1. 16 RF signal Inputs.
2. Front panel monitor output.
3. Standard 19" rack mount panel, 1.75" high.
4. Built in low noise figure, low distortion GaAs output amplifier for linear signal output.
The Spec Of CATV Modules : • 82 Channel Frequency Range 54~550MHz (CATV 2~13, A1~A5, A~PPP)
• SAW filtered IF for superior adjacent channel performance enables drop-in channel expansion
• BTSC Stereo Compatible pre-emphasis disable switch provides pass-through for stereo signals
• Front panel controls and test point enable easy setup....
The Spec Of CATV Modules : 1. Analog composite video input in NTSC/PAL format.
2. 4:2:0 MP@ML video compressions from 2.5 to 15 Mbps.
3. Analog stereo audio input.
4. MPEG-1 layer2 audio compression.
5. ISO/IEC 13818-1 PAT and PMT tables with Single Program Transport Stream (SPTS) output transport stream.
6. Local control via front pane ....
The Spec Of CATV Modules : 1. Audio/Video inputs MPEG-2 Encoder to one DVB-T signal output
2. Analog composite video input in NTSC/PAL format
3. Analog stereo audio input
4. MPEG-2 MP@ML video compression
5. MPEG-1 Layer2 audio compression
6. Programmable Channel Name and Network Name
7. Adjustable Logic Channel Number (LCN)
8. Easy Set-u....
The Spec Of CATV Modules : 1. 6 Audio/Video inputs MPEG-2 Encoder/Multiplexer to one QAM output
2. Analog composite video input in NTSC/PAL format
3. Analog stereo audio input
4. MPEG-2 MP@ML video compression
5. MPEG-1 Layer2 audio compression
6. RF output channel 2 ~ 135 (54 ~ 864 MHz)
7. Easy Set-up & Configuration via Front Panel L....
The Spec Of CATV Modules : 1. 82 Channel Frequency Range 54~ 550MHz (CATV 2~13, A1~A5, A~PPP)
2. SAW (surface acoustic wave) filtered for superior adjacent channel performance enables drop-in channel expansion
3. BTSC stereo compatible pre-emphasis disable switch provides pass-through for stereo signals
4. Front panel access controls enabl....
The Spec Of CATV Modules : 1. 135 Channel Frequency Range 54~860MHz (CATV 2~13, A1~A5, A~ZZZ, 89~135, UHF 14~69)
2. Agile microprocessor control enables quick digital push-button channel selection for ease of installation, configuration and improved system uptime
3. SAW (surface acoustic wave) filtered for superior adjacent channel performan....
