The Spec Of Drilling Machine Tools : 1.5 Banks parameter data, Each set can save various machining parameters. Available to expand to 10 sets(optional).
2.Parameter data can be finely adjusted and is suited for a range of machining operations. The unit can also use preset parameter data for easy operation.
3.EDP function:point sparking(surface sparking)....
The Spec Of Drilling Machine Tools : 1. EDG series, easy fast precision.
2. Ø3mm-Ø13mm. 1. Model No.: EDSG-313. 2. Motor: 200W. 3. Capacity: Ø3mm~Ø13mm. 4. R.P.M.: 4500 R.P.M. 5. Drill angle: 135°. 6. Weight: 12.8 kg. 7. Power supply: AC110V / AC220V single phase 50Hz/60Hz. 8. Grinding wheel: CBN#250. 9. Standard accessories: (1) ....
The Spec Of Drilling Machine Tools : Following the increasing demands for the rear boring on wheel valve hole, Vcenter-H26W is launched to meet this requirement for OEM wheel manufacturers to cover wheel size 13"~ 26" machining.
This 4-axis horizontal machining center also offers a flexible solution to after market wheel manufacturers on bigg....
The Spec Of Drilling Machine Tools : 1.Adopts mechanic switch with forward/ reverse functions and longer service life with low damage.
2.The arm is made of high-class cast-iron. Arm slide is under strick heat-treatment and grinding.
3.3HP motor can provide diverse speed selection under heavy-duty cutting.
4.The over-load protective devices can secure t....
The Spec Of Drilling Machine Tools : 1.Standard spindle speeds 8000 rpm
2.Optional spindle speeds 12000 rpm
3.Rigid tapping 3000 rpm
4.Spindle nose taper BT40
5.3 axes rapid traverse X, Y, Z: 36 / 36 / 36 m/min
6.Fully enclosed heat isolated electric cabinet
7.High speed mechanical ATC system T-T: M 2.2 sec F 3.2 sec
The Spec Of Drilling Machine Tools : 1. Laser drilling is the newest technology in the world. This technology can drill smaller holes than its mechanical counterparts. As a result, the boards can be smaller and thinner. There are two models in the printed circuit board, PCB, laser driller series. The HD600 was the first PCB driller designed and patented b....
The Spec Of Drilling Machine Tools : 1. Spindle gear 12 steps transmission for higher load capacity. High stiffness, high torque design.
2. Machine base is tempered, slide face is treated by high frequency HRC53°
3. High pressure pump, centerized lubrication, better cooling result and increase cutting efficiency.
4. Applicable for various steel workin....
The Spec Of Drilling Machine Tools : •Rotary working table design, 6-face contact for slide, stable operation, & powerful mangnetic force.
•Suitable for uneasy moving workpieces, such as: heavy duty machine processing, steam boiler making, machine tool making, steel frame & steel plate drilling for big building.
The Spec Of Drilling Machine Tools : 1. Whether hand-held or rig-mounted, the AGP Diamond Core Drilling line is specifically designed to match and exceed the demands of professionals. At the heart of these machines is a purpose-designed motor made to have the ideal characteristics for a diamond core drill application. They are plenty powerful, but the emp....
The Spec Of Drilling Machine Tools : This drilling machine is designed to drill back center hole. This machine is easy and simple to operate. This center hole is critical for coming and following machining. 1. Spindle Motor:0.5HP 2. Spindle Type:Pneumatic drilling head 3. Stroke:Max. 80mm 4. Work Size:Max. 200mm 5. Drill Size:Max. φ5 mm 6. Feeding....
The Spec Of Drilling Machine Tools : 1. Heavy duty geared head spindle power feed (0.12-0.18-0.25mm per/rev).
2. Hardened MT4 spindle / coolnat base.
3. Drilling capacity in cast iron: 50mm.
4. Drilling capacity in mild steel: 32mm.
5. Tapping capacity: 22mm.
6. Face mill capacity: 100mm.
7. End mill capacity: 25mm. 1. Drilling capacity in ca....
The Spec Of Drilling Machine Tools : 1. Available for milling, boring, drilling, tapping and etc.
2. Gear head can be tied 90" right &left each.
3. Clutch operated micro down feed.
4. The headstock is composed 11 pieces precision of gear (all 2.0mm pitch) and all immersed in oil bath.
5. Available CE standard as fig shows such as: elec....
The Spec Of Drilling Machine Tools : 1. Machines utilising the BTA Deep Hole Drilling System for solid deep hole boring 30–150mm in diameter.
2. Drilling depths up to 5000mm.
3. Coolant filtration to 30 microns.
4. The rigid honeycomb walled Bed gives a stable cutting condition. FC-32 castings have been stress relived and annealed.
5. Hardened and ....
The Spec Of Drilling Machine Tools : 1. 1.0 meter x 1.5 meter, the most popular worktable.
2. Function for drilling, tapping and milling long-holes.
3. High rigidness frame, competitive drilling speed.
4. High efficiency motors-> high torques for bigger diameters and high rev. for smaller diameters, Ø 14 -- Ø 50 mm.
5. Features:
(1) Two hydrauli....
The Spec Of Drilling Machine Tools : No mater what the kind of sanding application, Chin Chao Sheng can provide the machines that fully meet your requirements. We have the resources to design the machine to suit your rigorous requirements. 1. Spindle speeds: 4.
2. Drilling capacity: 13mm-1/2".
3. Swing: 360.
4. Distance from spindle nose to t....
The Spec Of Drilling Machine Tools : 1. Make starting holes for wire-cutting.
2. Drill small & deep holes on extra hard steel, alloy, powder metallurgy and metals that ordinary drilling machine unable to work on.
3. Intelligent CNC editing . Machining program is made automatically after inputting electrode pipe.Able to drill small & deep holes....
The Spec Of Drilling Machine Tools : 1. The drilling of water holes,electric-heating pipe holes.
2. The drilling of valves,controlling units, pushing rods, and pumps.
3. For automative parts industry, aerospace industry, and electric engineering industry. 1. Drilling diameter range: 6-32 mm.2. Drilling depth: 1800 mm.3. X-axis travel: 2500 mm.4. Y-a....
The Spec Of Drilling Machine Tools : 1.Patented "auto breaking chips" device -optional attachment for special function.
2.Patented mechanical drilling with "auto discharging chips" device-optional attachment for special function.
3.It's ideal for processing deep hole, tiny hole, stainless steel with the auto chips discharging devic....
The Spec Of Drilling Machine Tools : Our machine is solid for long time using, the operation and adjustment are easy and machine is powerful. We choose the best material and heat treatment, plus well-designed machine structure to achieve machine precise and long-life time. If you need further information about our Tube/Pipe Drilling machine, please vi....
The Spec Of Drilling Machine Tools : 1. This machine is specially designed for drilling both ends of workpieces.
2. This machine is driven by hydraulic system. Loading, drilling and unloading the workpieces are full-automatic operation.
3. The rotation of drilling-head is driven by motor. The rotary speed can be changed if need.
4. The drilling-head is....
The Spec Of Drilling Machine Tools : 1. Automatic loading bicycle axis two end drill tapping machine.
2. Strict quality control, best performance, superior quality, complete range of models, simple and easy maintenance, long service life, high reliability. According to cutomer's designs and specifications. Please Contact Us.We shall proceed your requ....
The Spec Of Drilling Machine Tools : 1.CNC high precision of positioning.
2.Multi-language operation panel, Big size of LCD display, memory for multi-presetting.
3.Intelligent operation system, Auto routing with X-Y axis input.
4.High pitch of ball screw for fast moving Fool of wrong X-Y axis input.
5.Instant Drilling speed to prevent hole edge rippi....
The Spec Of Drilling Machine Tools : 1. Throat depth: 120 mm.
2. Drilling diameter: 3-10 mm.
3. Minimum distance between holes: 40 mm.
4. Maximum distance between holes: 260 mm.
5. Motor: 1/2 HP x 2, 1 HP. 1. Machine dimensions (L x W x H): 950 x 820 x 1550 mm.2. Net weight: 450 kgs.3. Gross weight: 580 kgs. ....
The Spec Of Drilling Machine Tools : ‧Dual pilot drill For drilling fast, and prevent to accumulate the chips.
‧Slant tungsten steel designed for drilling faster and quicker. Provide 50% efficient more than standard types. And the hole is very beautiful.
The tungsten steel hole saw for door lock. The new Slant Tungsten cutting edge is very durab....
The Spec Of Drilling Machine Tools : It fits in working big workpieces of molding drilling field and fits in column NC drilling. The working table can take heavy weight and big size of mold and it is suitable for making the cooling holes and pin holes in the mold. The spindle is stepless when the gundrilling is working and it is the most efficiency machin....
The Spec Of Drilling Machine Tools : 1.Power motor. 1350W with double insulation design.
2.Built in adjustable cultch system to protect operator from
strong torque hurt and to prevent core bits from getting stuck.
3.Compact design, only 4 kg in weight.
4.Patented compact telescoping stick, makes it easy to operate and keep stable during drilling.
5.....
The Spec Of Drilling Machine Tools : OEM/ODM MANUFACTURER
PLASTICS PRODUCTS FOR DIG WELL
SPECIAL PLASTIC PRODUCTS FOR AGRICULTURE/PISCECULTURE
SPECIAL PLASTICS PRODUCTS FOR CONSTRUCTION, HILLSLOPE
OEM/ODM MANUFACTURER AND SUPPLIER
VARITIES OF PLASTIC DERIILING PRODUCTS FOR AGRICULTURE & INDUSTRIAL FIELDS
SPECIAL DRILLING PLASTIC PRODUCTS FOR DIG....
The Spec Of Drilling Machine Tools : *With circuit protection of breaking for motor, once any wire of three phases power source is broken off, this unit could cut off current to motor to prevent motor from being burn out.
*Drill sleeves、tapping adaptors and borer holder are with rapid adaptors, very convenient for replacement of cutters.
*Tapping adap....
The Spec Of Drilling Machine Tools : *This model can use normal straight handle drill bit or oblique handle drill bit to drill holes. And use tap bit to tap thread.
*The drilling capacity is from 3mm-22mm and the tapping capacity is from 8mm-14mm.
*The up/down transmission of the tool bit is by the round shaft gear rack, so the drilled holes and the tap....
