1. Frequency: 433.92 mhz. (315 mhz & 868 mhz are available)
2. Modulation: fsk.
3. Crystal-based.
4. Output power: 3 dbm. (2 mw)
5. Current consumption: 9 ma.
6. Working voltage: 2.6 ~ 12v.
7. Data rate: 15 k bps.
8. Power down (standby) mode: 1a.
9. Pcb size: 23.3 mm x 30 mm.
1. SAW-based transmitter board with built-in hopping code encoder.
2. Spec:
(1) Frequency: 433.92 MHz (315 MHz & 868 MHz are available).
(2) Modulation: ASK.
(3) SAW-based.
(4) Output power: 10 dBm (10 mW).
(5) Current consumption: 15 mA.
(6) Working voltage: 2.6 ~ 12V.
(7) Data rate: 10 K bps.
(8) Powe....
1. Frequency: 433.92 MHz. (315 MHz & 868 MHz are available)
2. Modulation: ASK.
3. Crystal-based.
4. Output power: 10 dBm (10 mW).
5. Current consumption: 8 mA.
6. Working voltage: 4 ~ 13V.
7. Data rate: 25 K bps.
8. Power down (standby) mode: 1A.
9. PCB size: 36 mm x 30 mm.
10. Frequency: 433.92 MHz.....
1. Frequency: 433.92 MHz. (315 MHz & 868 MHz are available)
2. Modulation: ASK.
3. Crystal-based.
4. Output power: 10 dBm (10 mW).
5. Current consumption: 8 mA.
6. Working voltage: 4 ~ 13V.
7. Data rate: 25 K bps.
8. Power down (standby) mode: 1A.
9. PCB size: 36 mm x 30 mm.
10. Frequency: 433.92 MHz.....
1. Frequency: 433.92 mhz. (315 mhz & 868 mhz are available)
2. Modulation: fsk.
3. Crystal-based.
4. Output power: 10 dbm (10 mw).
5. Current consumption: 14 ma.
6. Working voltage: 4 ~ 13v.
7. Data rate: 25 k bps.
8. Power down (standby) mode: 1 a.
9. Pcb size: 36 mm x 30 mm.
1. SAW-based transmitter board with built-in hopping code encoder.
2. Spec:
(1) Frequency: 433.92 MHz. (315 MHz & 868 MHz are available)
(2) Modulation: ASK.
(3) SAW-based.
(4) Output power: 10 dBm (10 mW).
(5) Current consumption: 15 mA.
(6) Working voltage: 2.6 ~ 12V.
(7) Data rate: 10 K bps.
(8) Pow....
1. Crystal-based transmitter board with built-in hopping code encoder.
2. Spec:
(1)Frequency: 433.92 MHz (315 MHz & 868 MHz are available).
(2)Modulation: FSK.
(3)Crystal-based.
(4)Output power: 3 dBm (2 mW).
(5)Current consumption: 9 mA.
(6)Working voltage: 2.6 ~ 12V.
(7)Data rate: 15 K bps.
(8)Power ....
1. Frequency: 433.92 mhz. (315 mhz & 868 mhz are available)
2. Modulation: fsk.
3. Crystal-based.
4. Output power: 3 dbm (2 mw).
5. Current consumption: 8 ma.
6. Working voltage: 2.6 ~ 12v.
7. Data rate: 15 k bps.
8. Power down (standby) mode: 1 a.
9. Pcb size: 23.3 mm x 30 mm.
SAM-stabilized design, surface mount RF transmitter, high-performance solution for remote control type applications. It is suitable for use with any ASK receiver available.
LC-stabilized design, surface mount RF transmitter, high-performance solution for remote control type applications. It is suitable for use with any ASK receiver available.
SAW–stabilized design, surface mount RF transmitter, high-performance solution for remote control type applications. It is suitable for use with any ASK receiver available.
Crystal based design, surface mount RF transmitter, high-performance solution for remote control type applications. It is suitable for use with any FSK receiver available.
Crystal based design, surface mount RF transmitter, high-performance solution for remote control type applications. It is suitable for use with any FSK receiver available.
The DT01 RF transmitter module offers a cost effective, high-performance solution for type applications. The transmitters are very small have a wide working voltage range( 4V -12V). Crystal based design. To use with any ASK receiver available.
The DT01S RF transmitter module offers a cost effective, high-performance solution for type applications. The transmitters are very small have a wide working voltage range(2.6V -12V) can deliver 10dBm output power into 50 ohm load at 3V. SAWstabilized design. To use with any ASK receiver available.
SAW-stabilized design, surface mount RF transmitter, high-performance solution for remote control type applications. It is suitable for use with any ASK receiver available.
SAW–stabilized design, surface mount RF transmitter, high-performance solution for remote control type applications. It is suitable for use with any ASK receiver available.
SAW–stabilized design, surface mount RF transmitter, factory programmed mega code format supports over 1,000,000 codes, high-performance solution for remote control type applications. It is suitable for use with any ASK receiver available.
