The Spec Of Carpentry Tools : *EXCLUSIVE PANEL PRESSURE DEVICE
The panel pressure device is specially designed to handle small pieces of stock. It requires no Vacuum adsorption, saving space and cost.
*SIMULTANEOUS LONGITUDINAL AND CROSS SANDING
The advance design consists of 2 crosswise spindles and 4-5 short longitudinal spindles with recipr....
The Spec Of Carpentry Tools : 1. These parallel-jaw bar clamps are valued for quick, accurateclamping of panels, carcasses and frameworks.
2. The end stop on the steel bar helps stabilize the clamp during use and detaches to resverse the screw jaw for spreading purposes.
3. The comfortable screw handle is compound material. 1. There are over....
The Spec Of Carpentry Tools : Powerfull, Efficient and Ergonomic Orbital Sander on the market. Ergonomically designed to deliver greater control, balance and comfort. Durable with longer operating life. 1. 5.0mm orbit LP random orbital sander with 5" pad.2. Rpm: 10,000.3. Vacuum, non-vacuum abailable.4. Length: 8.20" (208 mm).5. Weigh....
The Spec Of Carpentry Tools : ◦Suitable for cutting PVC pipe, bamboo, lead pipe, and most wood materials.
◦High carbon steel construction.
◦Faster cutting and Clean cut.
◦Tooth sharpness lasts 3-5 times longer than regular tooth form.
◦Quick change PVC Saw with tough ABS handle option and soft rubber handle option with
provides comf....
The Spec Of Carpentry Tools : 1.Scoring blade ensures tear-out free cutting.
2.Precision ground cast iron main table.
3.Table extensions on right and rear side of main table permits convenient cutting of large panels.
4.Quick clamp on sliding table.
5.Large handle for effortless cutting operations.
6.Quick display the degrees of blade tilt.
7....
The Spec Of Carpentry Tools : *270CC Gas engine w/Electric start (optional: 390cc, 670cc).
*Quickly adjusted the head up and down to change board thickness by a gear box.
The Spec Of Carpentry Tools : This router table kit is the perfect package to start you off on your woodworking projects. The package consists of a laminated MDF 24"x 32" router table top and 9" x 12" phenol router plate along with the Deluxe router fence. The router table fence kit includes two MDF fence plates supported by a s....
The Spec Of Carpentry Tools : SG-65 Sharpener equiped with high-accuracy double shafts servo control, prolonging saw blade life and lower lost of sharp errors substantially.
All built-in Sawing Group Parameters, you do not need to key-in or revise confoundedly..
The Spec Of Carpentry Tools : 1. Wood threading kit #1501 ~ #1505:
(1) Directly cuts internal and extermal threads in the manufacture of KD furniture, jigs, wood hammers, and more.
(2) Choice of 5 sizes: 1/2", 3/4", 1", 1 1/4", and 1 1/2", 1/2"--8 TPI otherwise 6 TPI.
2. Rounder set #1702:
(1) Works like a pencil s....
The Spec Of Carpentry Tools : LH - 4045 - DR: Auto end match shaper.
LH - 4045: Automatic end match shaper with dowel drilling.
Patent No.D127772
The Spec Of Carpentry Tools : 1. Hand tools have been designed with the end user in mind.
2. Outstanding and exceptionally wide variety of tool types and styles. 1. We are welcome customers supplying drawing or picture or samples to us for our reference.
2. For more information, please write us today. English-version color catalog is availabl....
The Spec Of Carpentry Tools : Professional power tool designing and manufacturing are made both electric (A.C) and rechargeable (D.C) power tool. OEM and ODM are welcome. 1. 7.2V JIG saw. 2. S.P.M: 2200,1 hour charge time. 3. Capacity: 12 mm soft wood. 4. 10 mm-hard wood. 5. 1 mm mild steel. ....
The Spec Of Carpentry Tools : *The contact roll is rubber coated and dynamically balanced.
*Photoelectric cell controlled sanding belt tracking.
*Body activated emergency stop.
*Variable feed speed of conveyor belt.
*Automatic machine stop in the event of air failure or sanding belt breakage.
*Work table computerized table-elevation.
*Quick r....
The Spec Of Carpentry Tools : Product Name：Vertical Band Saw For the product specifications, please refer to our official website. ....
The Spec Of Carpentry Tools : Product Name：Band Resaw For the product specifications, please refer to our official website. ....
The Spec Of Carpentry Tools : Product Name：Band Saw For the product specifications, please refer to our official website. ....
The Spec Of Carpentry Tools : Product Name：Vertical Band Resaw For the product specifications, please refer to our official website. ....
The Spec Of Carpentry Tools : Product Name：DOUBLE END TENONER For the product specifications, please refer to our official website. ....
The Spec Of Carpentry Tools : Product Name：Heavy Duty Wood Cutting Band Saw For the product specifications, please refer to our official website. ....
The Spec Of Carpentry Tools : Product Name：MANUAL EDGE BANDING MACHINE For the product specifications, please refer to our official website. ....
The Spec Of Carpentry Tools : Product Name：ROUND END TENONER For the product specifications, please refer to our official website. ....
The Spec Of Carpentry Tools : Product Name：MULTIPLE SPINDLE 4-SIDE MOULDERS For the product specifications, please refer to our official website. ....
The Spec Of Carpentry Tools : Product Name：DOUBLE SIDED PLANER For the product specifications, please refer to our official website. ....
The Spec Of Carpentry Tools : *Computerized table-elevation.
*Digital readout for the opening between the conveyor table and contact roller.
*The contact roller is rubber coated and dynamically balanced.
*Photoelectric cell controlled sanding belt tracking.
*Automatic machine stop in the event of air failure or sanding belt breakage.
*Quick re....
The Spec Of Carpentry Tools : *Anti-Kickback Fingers
Anti-kickback fingers are built in front of spiral cutterhead, eliminating the danger of panel kickback and ensuring the safety of the operator.
*Precision , Heavy Duty Spiral Cutterhead
-The spiral cutterhead is manufactured from special alloy steel, dynamically balanced for extreme smoothn....
The Spec Of Carpentry Tools : *Each individual pressure element continuously adapts to the respective workpiece shape.
*Automatic adoption and location within a workpiece or among several workpiece to reach 2mm.
*The pressure beam with more individual pressure elements: flexible, solid and maintenance-free.
*The automatic workpiece sensing and g....
The Spec Of Carpentry Tools : ◦Pulling cutting to save energy.
◦Thin blade provides accurate cutting.
◦Different tooth form on each edge of blade to do both cross and rip cutting.
◦Quick change blade to handle assembly.
◦Flexible blade for flush and finish cuts.
The Spec Of Carpentry Tools : ◦Application for cutting plasterboard, planting work and dry wall.
The Spec Of Carpentry Tools : JETWISETM Toothing
◦Each tooth is individually process by CNC machining.
◦Precision diamond ground teeth for razor sharp cutting.
◦3 sharp cutting edges on each tooth which cut wood fiber faster and cleaner.
◦Suitable for both rip or cross cut applications.
◦Cuts much faster than conventional punched tee....
The Spec Of Carpentry Tools : Constant attention to details, improved engineering standards, quality control, and innovative cutterhead technology have allowed the EXTEND LIGHT Industrial Double Surfacer to become America's #1 selling planer.
Advanced features, high tolerances, ease of maintenance & calibration provide a surfacer that is....
